summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-09-23fs: add mkdir interfaceAKASHI Takahiro
"mkdir" interface is added to file operations. This is a preparatory change as mkdir support for FAT file system will be added in next patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23fs: fat: extend get_fs_info() for write useAKASHI Takahiro
get_fs_info() was introduced in major re-work of read operation by Rob. We want to reuse this function in write operation by extending it with additional members in fsdata structure. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: SPDX-License-Identifier for efi.hHeinrich Schuchardt
Add the missing SPDX-License-Identifier based on Linux kernel commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: SPDX-License-Identifier for efi_api.hHeinrich Schuchardt
Add the missing SPDX-License-Identifier based on Linux kernel commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"). Correct formatting errors. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: struct efi_simple_text_input_protocolHeinrich Schuchardt
%s/efi_simple_input_interface/efi_simple_text_input_protocol/ We should be consistent in the naming of the EFI protocol interface structures. The protocol is called EFI_SIMPLE_TEXT_INPUT_PROTOCOL. %s/ExtendedVerification/extended_verification/ Use consistent naming of function parameters. Do not use CamelCase. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: EFI_UNICODE_COLLATION_PROTOCOLHeinrich Schuchardt
The patch implements the EFI_UNICODE_COLLATION_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23lib: charset: upper/lower case conversionHeinrich Schuchardt
Provide functions for upper and lower case conversion. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: capitalization tableHeinrich Schuchardt
This patch provides a define to initialize a table that maps lower to capital letters for Unicode code point 0x0000 - 0xffff. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: simplify ifdefsStephen Warren
Use CONFIG_IS_ENABLED(EFI_LOADER) to avoid explicitly checking CONFIG_SPL too. This simplifies the conditional. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23lib: charset: remove obsolete functionsHeinrich Schuchardt
Remove functions: - utf8_to_utf16() - utf16_strcpy() - utf16_strdup() Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23test: unit tests for Unicode functionsHeinrich Schuchardt
Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23lib: charset: utility functions for UnicodeHeinrich Schuchardt
utf8_get() - get next UTF-8 code point from buffer utf8_put() - write UTF-8 code point to buffer utf8_utf16_strnlen() - length of a utf-8 string after conversion to utf-16 utf8_utf16_strncpy() - copy a utf-8 string to utf-16 utf16_get() - get next UTF-16 code point from buffer utf16_put() - write UTF-16 code point to buffer utf16_strnlen() - number of codes points in a utf-16 string utf16_utf8_strnlen() - length of a utf-16 string after conversion to utf-8 utf16_utf8_strncpy() - copy a utf-16 string to utf-8 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: rename utf16_strlen, utf16_strnlenHeinrich Schuchardt
The function names utf16_strlen() and utf16_strnlen() are misnomers. The functions do not count utf-16 characters but non-zero words. So let's rename them to u16_strlen and u16_strnlen(). In utf16_dup() avoid assignment in if clause. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23mips: Add Gardena Smart-Gateway board supportStefan Roese
The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage. This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese <sr@denx.de> [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-23mips: Add LinkIt Smart 7688 supportStefan Roese
The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM and 32 MiB of flash (SPI NOR). This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese <sr@denx.de> [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22MIPS: cache: remove config option CONFIG_SYS_MIPS_CACHE_MODEDaniel Schwierzeck
Caches should be configured to mode CONF_CM_CACHABLE_NONCOHERENT (or CONF_CM_CACHABLE_COW when a CM is available). There is no need to make this configurable. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-20cmd: mtdparts: accept spi-nand devicesMiquel Raynal
Let spi-nand devices be recognized by mtdparts. This is superfluous but a full mtdparts rework would be very time-consuming. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Stefan Roese <sr@denx.de>
2018-09-20mtd: spinand: Add initial support for the MX35LF1GE4AB chipBoris Brezillon
Add minimal support for the MX35LF1GE4AB SPI NAND chip. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: spinand: Add initial support for Winbond W25M02GVFrieder Schrempf
Add support for the W25M02GV chip. Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: spinand: Add initial support for Micron MT29F2G01ABAGDPeter Pan
Add a basic driver for Micron SPI NANDs. Only one device is supported right now, but the driver will be extended to support more devices afterwards. Signed-off-by: Peter Pan <peterpandong@micron.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: nand: Add core infrastructure to support SPI NANDsPeter Pan
Add a SPI NAND framework based on the generic NAND framework and the spi-mem infrastructure. In its current state, this framework supports the following features: - single/dual/quad IO modes - on-die ECC Signed-off-by: Peter Pan <peterpandong@micron.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20spi: Extend the core to ease integration of SPI memory controllersBoris Brezillon
Some controllers are exposing high-level interfaces to access various kind of SPI memories. Unfortunately they do not fit in the current spi_controller model and usually have drivers placed in drivers/mtd/spi-nor which are only supporting SPI NORs and not SPI memories in general. This is an attempt at defining a SPI memory interface which works for all kinds of SPI memories (NORs, NANDs, SRAMs). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: nand: Pass mode information to nand_page_io_reqBoris Brezillon
The NAND sub-layers are likely to need the MTD_OPS_XXX mode information in order to decide if they should enable/disable ECC or how they should place the OOB bytes in the provided OOB buffer. Add a field to nand_page_io_req to pass this information. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-20mtd: nand: Add core infrastructure to deal with NAND devicesBoris Brezillon
Add an intermediate layer to abstract NAND device interface so that some logic can be shared between SPI NANDs, parallel/raw NANDs, OneNANDs, ... Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: move NAND files into a raw/ subdirectoryMiquel Raynal
NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-20mtd: move definitions to enlarge their rangeMiquel Raynal
Some helpers might be useful in a future 'mtd' U-Boot command to parse MTD device list. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-20mtd: add get/set of_node/flash_node helpersBrian Norris
We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-09-20mtd: Uninline mtd_write_oob and move it to mtdcore.cEzequiel Garcia
There's no reason for having mtd_write_oob inlined in mtd.h header. Move it to mtdcore.c where it belongs. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-19Merge git://git.denx.de/u-boot-imxTom Rini
- changes in pico-* boards - fix imx6ull pinmux
2018-09-19Merge git://git.denx.de/u-boot-marvellTom Rini
- Multiples updates to the turris boards / platform - Changes / enhancements to the Marvell PHY drivers, mainly to support the turris platform - Many fixes and enhancements to the pxa3xx NAND driver - Fixes for the UART boot mode in kwboot - Misc minor changes to other 32bit and 64bit boards
2018-09-19arm: mvebu: clearfog: enable eMMC boot partitions supportBaruch Siach
The Clearfog SOM can optionally have eMMC installed. Enable support for eMMC boot partitions by default. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19fix: mvebu: Add SPI parameters for environment setupKonstantin Porotchkin
Add definitions for CONFIG_ENV_SPI_BUS and CONFIG_ENV_SPI_CS to Armada-388-GP board configuration Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19phy: marvell: Support changing SERDES map in board fileMarek Behún
This adds a weak definition of comphy_update_map to comphy_core, which does nothing. If this function is defined elsewhere, for example in board file, the board file can change some parameters of SERDES configuration. This is needed on Turris Mox, where the SERDES speed on lane 1 has to be set differently when SFP module is connected and when Topaz Switch module is connected. This is a temporary solution. When the comphy driver for armada-3720 will be added to the kernel, the comphy driver in u-boot shall also be updated and this should be done differently then. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19arm64: mvebu: armada-8k: support environment in SD/eMMCBaruch Siach
Detect the SD/eMMC boot device at run-time. Load the environment from the boot deice, as well as save to it. Leave the environment offset the same as in the SPI flash. Make SD/eMMC 0 the default environment device when the boot device is not detected. Cc: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19Kirkwood: NAS220: remove bootdelay from CONFIG_EXTRA_ENV_SETTINGSEvgeni Dobrev
The default bootdelay of 3 seconds is good enough and there is no need to duplicate it in CONFIG_EXTRA_ENV_SETTINGS. Signed-off-by: Evgeni Dobrev <evgeni@studio-punkt.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-18Merge git://git.denx.de/u-boot-dmTom Rini
- MPC83xx device tree additions (CPU and RAM) - Fix sandbox build error - Sync bitrev with Linux - Various ofnode/DT improvements
2018-09-18dm: uclass: Adding missing child_pre_probe descriptionBin Meng
The comment of child_pre_probe, one of the 'struct uclass_driver' members, is currently missing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-18pico-imx7d: Add PICO-Hobbit baseboard supportOtavio Salvador
This adds the device tree to the DFU and bootmenu environment setting. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18pico-imx6ul: Add PICO-Pi baseboard supportOtavio Salvador
This adds the device tree to the DFU and bootmenu environment setting. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-18Merge branch 'master' of git://git.denx.de/u-boot into masterStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2018-09-18ofnode: add ofnode_by_prop_value()Jens Wiklander
Adds ofnode_by_prop_value() to search for nodes with a given property and value, an ofnode version of fdt_node_offset_by_prop_value(). Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-18cpu: Add cpu_probe_all methodMario Six
Add a method to probe all CPUs of the board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18cpu: Fix cpu.h documentationMario Six
Documentation in cpu.h is not in kernel-doc format. Change it to comply with it. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18board_f: Use static print_cpuinfo if CONFIG_CPU is activeMario Six
When the DM CPU drivers are active, printing information about a CPU should be delegated to a matching driver. Hence, add a static print_cpuinfo that implements this delegation when DM CPU drivers are active. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc> Changed condition to CONFIG_IS_ENABLED(CPU): Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-18init: Fix documentationMario Six
The documentation in init.h is not in kernel-doc format. Fix this. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18clk: Add MPC83xx clock driverMario Six
Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18sysreset: Add get_status methodMario Six
It's useful to have the reset status of the SoC printed out during reset (e.g. to learn whether the reset was caused by software or a watchdog). As a first step to implement this, add a get_status method to the sysreset class, which enables the caller to get printable information about the reset status (akin to get_desc in the CPU uclass). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18ram: Add driver for MPC83xxMario Six
Add a RAM driver for the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18lib: bitrev: Sync with Linux kernel v4.17Bin Meng
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-17Merge git://git.denx.de/u-boot-x86Tom Rini
generated by cgit (git 2.34.1) at 2025-02-19 00:32:17 +0000