summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-08-06board_f: Introduce arch_setup_bdinfo initcallOvidiu Panait
Certain architectures (ppc, mips, sh, m68k) use setup board_part1 and setup_board_part2 calls during pre-relocation init to populate gd->bd boardinfo fields. This makes the generic init sequence cluttered with arch-specific ifdefs. In order to clean these arch-specific sequences from generic init, introduce arch_setup_bdinfo weak initcall so that everyone can define their own bdinfo setup routines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: Introduce setup_bdinfo initcallOvidiu Panait
Introduce setup_bdinfo initcall as a generic routine to populate bdinfo fields. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Remove CONFIG_SYS_SRAM_STARTOvidiu Panait
Remove ad-hoc CONFIG_SYS_SRAM_START and use CONFIG_SYS_SRAM_BASE instead. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_SIZE to KconfigOvidiu Panait
This converts ad-hoc CONFIG_SYS_SRAM_SIZE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_BASE to KconfigOvidiu Panait
This converts ad-hoc CONFIG_SYS_SRAM_BASE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-05Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- r2dplus updates
2020-08-04dt-bindings: Sync include/dt-bindings/phy/phy.h from LinuxMichal Simek
Add 4 new phy types which are present in Linux kernel. DP and SGMII types are used on Xilinx ZynqMP devices. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-04arm: move CONFIG_PREBOOT="usb start" to KConfigJonas Smedegaard
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig for all boards also declaring USB_KEYBOARD. Besides simplifying defconfig files, this also enables support for board-specific CONFIG_PREBOOT for sunxi boards: commit 37304aaf60bf ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig") intended to support CONFIG_PREBOOT, but include/configs/sunxi-common.h hardcodes preboot as part of internally defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific CONFIG_PREBOOT. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-08-04lmb/bdinfo: dump lmb info via bdinfoTero Kristo
Dump lmb status from the bdinfo command. This is useful for seeing the reserved memory regions from the u-boot cmdline. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- add DM based reset driver for SiFive SoC's.
2020-08-04Merge tag 'mips-pull-2020-08-03' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - doc: fix qemu-mips build instructions - MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-03dm: core: Guard against including dm.h in header filesSimon Glass
Header files generally should not include header files just for a struct, since forward declarations work just as well and reduce overhead. Add a warning for dm.h being included, since this has crept into U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03net: Drop dm.h header file in eth_phy.hSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03clk: Drop dm.h header file in clk-provider.hSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration and un-inlining of dev_get_clk_ptr() instead. Fix up the kendryte header files to avoid build errors. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2020-08-03efi: Tidy up header includesSimon Glass
Two files relies on efi_driver.h to include common.h and dm.h which is incorrect. The former should always be included in a non-host C file and the latter should be included if driver model is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03w1: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03thermal: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03sf: Drop dm.h header file from spi_flash.hSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03net: Drop dm.h header file from phy.hSimon Glass
This header file should not be included in other header files. Remove it and use other headers and C inclusions instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03dm: core: Drop header files from dm/test.hSimon Glass
These header file should not be included in other header files. Remove them and add to each individual file. Add test/test.h to test/ui.h since that is a reasonable place. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03dm: core: Drop dm.h header file from dm-demo.hSimon Glass
This header file should not be included in other header files. Remove it and add it to the cmd file instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi: Drop SPI_XFER_MMAP*Simon Glass
These two defines are no-longer supported. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-mem: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03wdt: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also remove the other headers that are not needed, since the inline code was removed in a recent commit: b4d9452c4 ("watchdog: move initr_watchdog() to wdt-uclass.c") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04dt-bindings: prci: add indexes for reset signals available in prciSagar Shrikant Kadam
Add bit indexes for reset signals within the PRCI module on FU540-C000 SoC. The DDR and ethernet sub-system's have reset signals indicated by these reset indexes. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-03clk: clk_octeon: Add simple MIPS Octeon clock driverStefan Roese
This patch adds a simple clock driver for the Marvell Octeon MIPS SoC family. Its for IO clock rate passing via DT in some of the Octeon driver, like I2C. So that we don't need to use the non-mainline API octeon_get_io_clock(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukasz Majewski <lukma@denx.de>
2020-08-03imx8m: enlarge CONFIG_SYS_BOOTM_LENPeng Fan
Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with AArch32 mode Linux kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-08-03imx: Add MYiR Tech MYS-6ULX supportParthiban Nallathambi
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-08-02sh: r2dplus: Enable DM_SERIAL and DM_CLKMarek Vasut
Switch r2dplus to DM and DT probing for serial and clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-01efi_loader: Enable run-time variable support for tee based variablesIlias Apalodimas
We recently added functions for storing/restoring variables from a file to a memory backed buffer marked as __efi_runtime_data commit f1f990a8c958 ("efi_loader: memory buffer for variables") commit 5f7dcf079de8 ("efi_loader: UEFI variable persistence") Using the same idea we now can support GetVariable() and GetNextVariable() on the OP-TEE based variables as well. So let's re-arrange the code a bit and move the commmon code for accessing variables out of efi_variable.c. Create common functions for reading variables from memory that both implementations can use on run-time. Then just use those functions in the run-time variants of the OP-TEE based EFI variable implementation and initialize the memory buffer on ExitBootServices() Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-31env: Add support for explicit write access listMarek Vasut
This option marks any U-Boot variable which does not have explicit 'w' writeable flag set as read-only. This way the environment can be locked down and only variables explicitly configured to be writeable can ever be changed by either 'env import', 'env set' or loading user environment from environment storage. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Discern environment coming from external storageMarek Vasut
Add another custom environment flag which discerns environment coming from external storage from environment set by U-Boot itself. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Add H_DEFAULT flagMarek Vasut
Add another internal environment flag which indicates that the operation is resetting the environment to the default one. This allows the env code to discern between import of external environment and reset to default. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31cmd: env: add env select commandPatrick Delaunay
Add the new command 'env select' to force the persistent storage of environment, saved in gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31cmd: env: add env load commandPatrick Delaunay
Add the new command env load to load the environment from the current location gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: the ops driver load becomes mandatory in struct env_driverPatrick Delaunay
The ops driver load becomes mandatory in struct env_drive, change the comment for this ops and remove unnecessary test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: add prototypes for weak functionPatrick Delaunay
This patch adds prototypes for several weak functions: - env_ext4_get_intf - env_ext4_get_dev_part - env_get_location It solves the following warnings when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c:849:19: warning: no previous prototype for 'env_get_location' [-Wmissing-prototypes] enum env_location env_get_location(enum env_operation op, int prio) ^~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:876:13: warning: no previous prototype for 'env_ext4_get_intf' [-Wmissing-prototypes] const char *env_ext4_get_intf(void) ^~~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:889:13: warning: no previous prototype for 'env_ext4_get_dev_part' [-Wmissing-prototypes] const char *env_ext4_get_dev_part(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-29Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
2020-07-29drivers: tee: broadcom: add optee based bnxt fw load driverVikas Gupta
Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: pinctrl: add ns3 pads definitionRayagonda Kokatanur
Add NS3 pads definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add support for flashing imagesBharat Gooty
Add support for flashing images into QSPI and eMMC. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add env variables for Linux bootBharat Gooty
Add env variables and commands for booting Linux. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add ddr memory definitionRayagonda Kokatanur
Add ddr memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add memory definitionsRayagonda Kokatanur
Add NS3 memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environmentDavid Woodhouse
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>