summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-07ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt commandClaudius Heine
The SPL does not have DM enabled and therefor still needs to use the hardware watchdog interface provided by the imx-watchdog driver. Fixes: broken reset command after f2929d11a639 ("watchdog: imx: Use immediate reset bits for expire_now") Signed-off-by: Claudius Heine <ch@denx.de>
2020-01-07mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USBBaruch Siach
Make first step in DT/DM migration. Enable OF_CONTROL only for the main U-Boot image for now. Remove mmc_init_main() because board_mmc_init() is not called when DM_MMC is enabled. DM_MMC requires DM_GPIO for card-detect to work. That in turn makes gpio request mandatory. Add code to request/free gpios in platform code. MMC devices are now numbered according to DT. The SD card is 1, and eMMC is 2. Account for that in board_mmc_get_env_dev(), BOOT_TARGET_DEVICES, and has_emmc(). DM_MMC requires BLK. However, the (BLK && !DM_USB) combination disables USB_STORAGE. Enable DM_USB to preserve USB functionality. Add also DM_REGULATORS for the USB power controller. This allows us to drop board_ehci_hcd_init() and setup_usb(). Runtime selection of DT is necessary because of the i.MX6QD vs i.MX6SDL incompatibility. DT selection does not rely on GPIOs, since DM_GPIO depends on DT. Instead, we take one "fully featured" DT of each variant. That should be enough to boot from both SD card and eMMC. Since we don't select the exact DT, override the generic show_board_info() that shows the selected DT 'model' field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07dt-bindings: add imx-audmux macro definitionsBaruch Siach
Import fsl-imx-audmux.h from Linux as of v5.4-rc6. The header is unchanged since v4.18. That would make it easier to import DT files that depend on imx-audmux definitions from the kernel tree. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07board: ge: pass rtc_status via device treeIan Ray
Pass rtc_status via the device tree, instead of on kernel command line. Additionally, the 2038 mitigation is reported, if applied successfully. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07board: ge: bx50v3: Enable DM for PCI and ethernetDenis Zalevskiy
DM for PCI pulls DM for ethernet that also needs other changes described below to build u-boot and keep existing functionality - ability to update MAC addresses of FEC ethernet adapter and I210 adapter connected to the Marvell switch. - fec_mxc driver with DM needs PHYLIB; - configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig; - FEC is marked as eth0 because it is always present, so indices changed: I210 are still probed in the same order; - board_eth_init() was used by legacy ethernet, setup for enet iomux and pcie is moved to the board_late_init(); - pci_init() is called from the board_late_init() to initiate PCI bus probing, so I210 devices are propagated to the device tree; Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com> [Describe PHY reset in device tree] Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07board: ge: bx50v3: Fix message output to video consoleIan Ray
Use vidconsole for output to the LCD, now that DM_VIDEO is used. Write white text on a black background, like before migrating to DM_VIDEO. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07imx: Add support for i.MX28 based XEA boardLukasz Majewski
This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07imx6: aristainetos: add support for rev C boardHeiko Schocher
add support for revision C boards. This board has no longer a NAND. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add aristainetos 2b cslHeiko Schocher
add aristainetso board version CSL. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: readd aristainetos 2b boardHeiko Schocher
readd aristainetos 2b board. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: enable HAB bootHeiko Schocher
enable IMX_HAB on aristianetos board Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: cleanup default EnvironmentHeiko Schocher
sync defaut Envoronment with customer changes. Unfortunately they are not changeable, as already board is in production mode. Get rid of the big bootcommand and set bootcommand through Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add DM_I2C supportHeiko Schocher
enable DM_I2C in defconfig and remove i2c specific board code. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: add DM_VIDEO supportHeiko Schocher
add DM_VIDEO support and remove now unneeded board code. As we show a bmp logo on boot, call now bmp_display() from board code and do not use cfb_console anymore. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert CONFIG_DM_SPIHeiko Schocher
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH and get rid of build removal warnings. define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer needed, so remove it from config_whitelist.txt Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert to DM_USBHeiko Schocher
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB in defconfig. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: convert to DM_MMCHeiko Schocher
Enable DM_MMC support. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: remove aristainetos-v2.cHeiko Schocher
remove aristainetos-v2.c file, as we now want to switch to DM/DTS support and have all board specific code in one file. Goal is to setup differences through DT. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: disable gigabit supportHeiko Schocher
gigabit support does not work on the aristainetos board, so disable it. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: remove 2b versionHeiko Schocher
remove 2b version of aristainetos board, as it is easier to make the DM / DTS port and introduce the 2b board version again (also some more board version). Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: aristainetos: move defines to KconfigHeiko Schocher
move defines, which are already moved to Kconfig out of board config. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07video: lg4573: convert to DMHeiko Schocher
convert this driver to support DM. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07imx6: remove aristainetos boardHeiko Schocher
remove not anymore used aristainetos board. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-03include/u-boot/crc.h: pull 'uint' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'? 37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len, | ^~~~ | int ``` Note: 'uint' is not defined there. On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files. The change imports 'uint' declaration from '<compiler.h>'. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03include: fix 'ulong' definition on musl targetsSergei Trofimovich
The build failure was originally reported on arm64-musl target at https://bugs.gentoo.org/703132. Here is the amd64-musl variant: ``` $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc) $ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc) ... In file included from tools/env/../../env/flags.c:7, from tools/env/env_flags.c:1: include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'? 159 | ulong env_get_ulong(const char *name, int base, ulong default_val); | ^~~~~ | long ``` Note: 'ulong' is not defined there. On glibc 'ulong' comes from <sys/types.h>: ```c /* Old compatibility names for C types. */ typedef unsigned long int ulong; ``` On musl it comes from <sys/types.h> as well but from under different guards: ```c typedef unsigned long u_long, ulong; ``` The change inlines 'ulong' define similar to 'uint' define. Bug: https://bugs.gentoo.org/703132 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2019-12-31rockchip: rk3328: add COUNTER_FREQUENCY definitionKever Yang
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to make the timer works correct. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-28Merge tag 'u-boot-imx-20191228' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - Fixes for Nitrogen6x - Fix corruption for mx51evk - colibri i.MX6: fix broken ESDHC conversion - mx6sxsabresd: fix broken mmcdev - imx6q_logic: cleanup boot sequence - update ATF for imx8mq_evk - pfuze: fix pmic_get() Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/630007464
2019-12-27omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HWPatrik Dahlström
The omap3_beagle NAND ECC scheme was changed in 4b37928d357 for unknown reasons, leading to uncorrectible ecc errors. This commit changes it back to what it was before. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
2019-12-27imx8m_evk: Remove unneeded earlycon stringFabio Estevam
Passing earlycon string in the command line may be useful during bring up, but not after such phase. Remove the earlycon string to align with the other i.MX SoCs command lines. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27mx51evk: Fix U-Boot corruption after saving the environmentFabio Estevam
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem to happen in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27mx6sxsabresd: Adjust the mmcdev after DM conversionFabio Estevam
After the DM conversion the boot SD card is now device 3. Adjust it so that we can boot the kernel again. While at it avoid a hardcoded mmc dev inside the finduuid script. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-27rockchip: rk3308: allow loading larger kernel ImageAndy Yan
When compile the curren mainline linux kernel(Linux 5.5-rc3) with defconfig, the final Image is 29M, it's much larger than Linux 5.4. On the current u-boot side on rk3308, the gap between kernel and fdt is 25M, the fdt will overwrite kernel Image, so move ftd to a higher memory to give 34M gab for them. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-13arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfigGrygorii Strashko
Move BOOTP_DNS2 and PHY_TI from dra7xx_evm.h to dra7xx_evm_defconfig. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-13common: remove duplicate typedef for ucharHeinrich Schuchardt
With commit 37db55b7e9db ("linux/types.h: fix typo unchar") we have a duplicate typedef for uchar. As linux/types.h is included in common.h we don't need another typedef for uchar there. Fixes: 37db55b7e9db ("linux/types.h: fix typo unchar") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Increase stack size to avoid a stack overflow during distro boot. - Add hifive-unleashed-a00.dts for SIFIVE FU540. - Add OF_SEPARATE support for SIFIVE FU540. - Add SPL support for Andes AX25 AE350. - Improve U-Boot SPL / OpenSBI smp boot flow for RISC-V.
2019-12-10spl: opensbi: specify main hart as preferred boot hartLukas Auer
OpenSBI uses a relocation lottery to determine the hart to relocate OpenSBI to its link address. In the U-Boot SPL boot flow, the main hart schedules the secondary harts to enter OpenSBI before doing so itself. One of the secondary harts will therefore always be the winner of the relocation lottery. This is problematic if the link address ranges of OpenSBI and U-Boot SPL overlap. OpenSBI will be relocated and therefore overwrite U-Boot SPL while some harts may still run it, leading to code corruption. Avoid this problem by specifying the main hart as the preferred boot hart to perform the OpenSBI relocation. The main hart will be the last hart to enter OpenSBI, relocation can therefore occur safely. The boot hart field was added to version 2 of the OpenSBI FW_DYNAMIC info structure. The header file include/opensbi.h is synchronized with include/sbi/fw_dynamic.h from the OpenSBI project to update the info structure. The header file is recent as of commit 7a13beb21326 ("firmware: Add preferred boot HART field in struct fw_dynamic_info"). Reported-by: Rick Chen <rick@andestech.com> Suggested-by: Anup Patel <Anup.Patel@wdc.com> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-10riscv: ax25-ae350: add SPL configurationRick Chen
This patch provides four configurations which can support U-Boot SPL to boot from RAM or FLASH and then boot FIT image including OpenSBI FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices. With ae350_rv[32|64]_spl_defconfigs: U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode and then load FIT image from RAM device on AE350. With ae350_rv[32|64]_spl_xip_defconfigs: U-Boot SPL can be burned into SPI flash and run in flash in machine mode and then load FIT image from SPI flash or MMC device on AE350. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-09Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-netTom Rini
2019-12-09dma: ti: k3-udma: Implement dma_get_cfg() interfaceVignesh Raghavendra
Implement dma_get_cfg() interface to pass flow id information for DMA clients to use. This is needed because on K3 SoCs, CPSW (ethernet) and UDMA (DMA provider) support "flows" within a given RX DMA channel. This allows different network packets to be segregated while using same RX DMA channel. In order for basic ethernet to work, CPSW slave must be aware of the flow ID allocated for the RX channel by the DMA driver. This interface allows CPSW to query flow ID from DMA provider and configure it in CPSW HW. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09dma: Introduce dma_get_cfg() interfaceVignesh Raghavendra
Sometimes, there would be a need to exchange data between DMA provider and DMA client which are very specific to DMA driver of the SoC/platform and are not generic enough to be put into struct dma. Therefore, introduce dma_get_cfg() interface to get DMA provider specific data from client device. Clients can use unique configuration ID flags to get different configuration data from DMA driver. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09net: mdio-uclass: add dm_eth_phy_connect helper functionAlex Marginean
The function connects an ethernet device to a PHY using DT information. This API is only available for eth devices with an associated device tree node. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarityAlex Marginean
Renamed dm_mdio_phy_connect arguments dev to mdiodev and addr to phyaddr for a bit more clarity and consistency with the following patches. Also use NULL instead of 0 on error return path. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09include: phy: add data field for private driver dataAlex Marginean
This is useful to carry custom information between the driver structure associated with a specific HW and the driver code. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09include: phy: define XFI and USXGMII interface typesAlex Marginean
Drivers currently use XGMII for XFI and USXGMII and, where needed, use other information to identify the actual protocol on the board. With these two defined drivers can now rely on DT phy-mode property. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09dt-bindings: phy: dp83867: Add documentation for disabling clock outputGrygorii Strashko
Based on commit 980066e6d964 ("dt-bindings: phy: dp83867: Add documentation for disabling clock output") of mainline linux kernel. The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: Improve documentation for string_to_ip()Joe Hershberger
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: Always build the string_to_enetaddr() helperJoe Hershberger
Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-09linux/types.h: fix typo uncharHeinrich Schuchardt
unsigned char should be called uchar and not unchar. This fixes a build error in lib/crypto/x509_cert_parser.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-09Merge tag 'u-boot-imx-20191209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.01 ----------------- - imx8qxp_mek: increase buffer sizes and args number - Fixes for imx7ulp - imx8mm: Fix the first root clock in imx8mm_ahb_sels[] - colibri_imx7: reserve DDR memory for Cortex-M4 - vining2000: fixes and convert to ethernet DM - imx8m: fix rom version check to unbreak some B0 chips - tbs2910: Disable VxWorks image booting support
generated by cgit (git 2.34.1) at 2024-12-26 07:19:49 +0000