summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-30rk3399: Check MMC env while defining itJagan Teki
rk3399 do support SPI flash as well, so there is a possibility of using flash environment for those usecases. So define env device for MMC only when it is used by specific configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-29Merge tag 'for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini
i2c changes for 2020.04 - updates the Designware I2C driver - get timings from device tree - handle units in nanoseconds - make sure that the requested bus speed is not exceeded - few smaller clean-ups - adds enums for i2c speed and update drivers which use them - global_data: remove unused mxc_i2c specific field
2020-01-28Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
- Various exynos fixes
2020-01-27Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- spi cs accessing slaves (Bin Meng) - spi prevent overriding established bus (Marcin Wojtas) - support speed in spi command (Marek Vasut) - add W25N01GV spinand (Robert Marko) - move cadence_qspi to use spi-mem (Vignesh Raghavendra) - add octal mode (Vignesh Raghavendra)
2020-01-28arm: exynos: odroid: Change autoboot script to use ${mmcbootdev}Marek Szyprowski
This fixes the default boot command for the SD-card boot case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-27power: regulator: add driver for Dialog DA9063 PMICMartin Fuzzey
Add a driver for the regulators in the the DA9063 PMIC. Robert Beckett: move regulator modes to header so board code can set modes. Correct mode mask used in ldo_set_mode. Add an option CONFIG_SPL_DM_REGULATOR_DA9063. Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-27power: pmic: add driver for Dialog DA9063 PMICMartin Fuzzey
This adds the basic register access operations and child regulator binding (if a regulator driver exists). Robert Beckett: simplify accesses by using bottom bit of address as offset overflow. This avoids the need to track which page we are on. Add an option CONFIG_SPL_DM_PMIC_DA9063. Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-27mtd: spi-nor-core: Add octal mode supportVignesh Raghavendra
Add support for Octal flash devices. Octal flash devices use 8 IO lines for data transfer. Currently only 1-1-8 Octal Read mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-27dm: spi: Check cs number before accessing slavesBin Meng
Add chip select number check in spi_find_chip_select(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine
2020-01-27Merge tag 'u-boot-clk-26Jan2020' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-clk - Various clock fixes and enhancements
2020-01-27i2c: Add enums for i2c speed and address sizeSimon Glass
Some drivers define their own speed enums and use their own constants for speed. It makes sense to have a unified defition of the different speeds. Since many controllers have to do different things for fast/high speed, it is a good idea to have an enum for the mode. Add these as well as an enum for the address mode. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-01-27global_data: remove unused mxc_i2c specific fieldBaruch Siach
The srdata field is unused since commit 71204e95ce13228 ("i2c: mxc: refactor i2c driver and support dm"). Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-26Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai) - Allwinner R40 Ethernet, usb phy enablement (Andre Przywara) - Sunxi auto load from 128KB MMC offset (Andre Przywara) - Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26clk: Include missing headers for linux/clk-provider.hSean Anderson
This header was missing a couple of include dependencies when included on its own. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a, ls1088a platforms: - lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes
2020-01-25mtd: add prototypes for weak functionPatrick Delaunay
This patch adds a prototype for the weak function board_mtdparts_default(). It solves one warning when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c: warning: no previous prototype for 'board_mtdparts_default' [-Wmissing-prototypes] void board_mtdparts_default(const char **mtdids, const char **mtdparts) ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-25common: blk: fix comment about blkcache_read return valueEric Nelson
The blkcache_read() routine returns 1 (true) to indicate that a block was found in the cache and returned, or 0 if not. Signed-off-by: Eric Nelson <eric@nelint.com>
2020-01-25common: add blkcache initAngelo Durgehello
On m68k, block_cache list is relocated, but next and prev list pointers are not adjusted to the relocated struct list_head address, so the first iteration over the block_cache list hangs. This patch initializes the block_cache list after relocation. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com> Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25configs: mt8518: set global variables for fastbootmingming lee
set common fastboot variables for mt8518 Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-24sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108Chen-Yu Tsai
Sync the device tree files and device tree header files from upstream Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo 98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next which is also part of next-20200108. Changes brought in include: - cleanup of pinmux node names - addition of Security ID, MBUS, CSI, crypto engine, video codec, pmu, and thermal sensor device nodes for both SoCs - addition of deinterlacing engine device node on H3 - cleanup of RTC device node and addition of its clocks - various board cleanups and improvements - removal of pinmux node for GPIO lines - cpufreq / DVFS - HDMI output - UART-based Bluetooth - audio codec - USB ports - new boards Most of the changes don't concern U-boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24common: Update comment to show progressSimon Glass
This file doesn't include any declarations anymore but it does include other headers. Update the header comment to mention this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Collect all the header files togetherSimon Glass
There are many header files included here. Put them all together since the blank lines are not useful. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATASimon Glass
This is not really a CONFIG since it is not intended to be set by boards. Move it into the compiler header with other similar defines, and rename it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move ROUND() into kernel.hSimon Glass
Move this macro in with all the other rounding macros. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move check_member() to kernel.hSimon Glass
The kernel.h file has a number of useful macros including a few related to structures. Move check_member() there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-24common: Move testdram() into init.hSimon Glass
This function is called during init so move it to the init header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move RAM-sizing functions to init.hSimon Glass
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Rename and move source()Simon Glass
This function has a very generic name which does not adequately describe its purpose. Rename it and move it to image.h, since it relates to reading a script from an image. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move the image globals into image.hSimon Glass
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24image: Rename load_addr, save_addr, save_sizeSimon Glass
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move reset_cpu() to the CPU headerSimon Glass
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move reset_misc() function to arch headerSimon Glass
This function is only used on ARM devices. Move it out of the common file and to a arch-specific header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move upmconfig() to ppc.hSimon Glass
This file is only used by PowerPC so move it to an arch-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move ll_boot_init() to init.hSimon Glass
This is an init-related function so belongs in that file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: arm: Move s_init() to an ARM-specific headerSimon Glass
This function is only used on ARM devices so does not belong in the global common header file. Move it to an ARM header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move device-tree setup functions to fdt_support.hSimon Glass
These functions relate to setting up the device tree for booting the OS. The fdt_support.h header file supports similar functions, so move these there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move type declarations to linux/types.hSimon Glass
This file already has lots of type declarations so it seems better to put all of them there. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop the symbol_lookup() declarationSimon Glass
This function is not called anywhere so we can drop the declaration. If it is needed one day, it should be added in its own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop CONFIG_HAS_POSTSimon Glass
This only exists to control whether the post/ directory is build. It is just as easy to check this in the Makefile. Remove CONFIG_HAS_POST and use an ifdef in the Makefile instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop CONFIG_POST_STD/ALT_LISTSimon Glass
These CONFIG options are not used anymore. CONFIG_POST_ALT_LIST just causes CONFIG_POST_STD_LIST to be set and it causes tests.c to be compiled. So just make compiling tests.c unconditional. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.hSimon Glass
This define seems better suited to the eeprom header file, particularly as it is only used in the eeprom.c file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move reset_phy() to net.hSimon Glass
This is a network function so let's move it into that header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Drop floppy disk supportSimon Glass
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move jumptable_init() out of common.hSimon Glass
This function is defined in exports.c so move it to its header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-24common: Move relocate_code() to init.hSimon Glass
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move functions for loading from fat/ext2 to fs.hSimon Glass
These are filesystem functions and belong in the filesystem header file. Move them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24common: Move do_tftpb() to net.hSimon Glass
This function belongs in the network header file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-27 05:46:08 +0000