summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03dm: core: Drop header files from dm/test.hSimon Glass
These header file should not be included in other header files. Remove them and add to each individual file. Add test/test.h to test/ui.h since that is a reasonable place. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03dm: core: Drop dm.h header file from dm-demo.hSimon Glass
This header file should not be included in other header files. Remove it and add it to the cmd file instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi: Drop SPI_XFER_MMAP*Simon Glass
These two defines are no-longer supported. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-mem: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03wdt: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also remove the other headers that are not needed, since the inline code was removed in a recent commit: b4d9452c4 ("watchdog: move initr_watchdog() to wdt-uclass.c") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-04dt-bindings: prci: add indexes for reset signals available in prciSagar Shrikant Kadam
Add bit indexes for reset signals within the PRCI module on FU540-C000 SoC. The DDR and ethernet sub-system's have reset signals indicated by these reset indexes. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-03clk: clk_octeon: Add simple MIPS Octeon clock driverStefan Roese
This patch adds a simple clock driver for the Marvell Octeon MIPS SoC family. Its for IO clock rate passing via DT in some of the Octeon driver, like I2C. So that we don't need to use the non-mainline API octeon_get_io_clock(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Lukasz Majewski <lukma@denx.de>
2020-08-03imx8m: enlarge CONFIG_SYS_BOOTM_LENPeng Fan
Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with AArch32 mode Linux kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-08-03imx: Add MYiR Tech MYS-6ULX supportParthiban Nallathambi
MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
2020-08-02sh: r2dplus: Enable DM_SERIAL and DM_CLKMarek Vasut
Switch r2dplus to DM and DT probing for serial and clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-08-01efi_loader: Enable run-time variable support for tee based variablesIlias Apalodimas
We recently added functions for storing/restoring variables from a file to a memory backed buffer marked as __efi_runtime_data commit f1f990a8c958 ("efi_loader: memory buffer for variables") commit 5f7dcf079de8 ("efi_loader: UEFI variable persistence") Using the same idea we now can support GetVariable() and GetNextVariable() on the OP-TEE based variables as well. So let's re-arrange the code a bit and move the commmon code for accessing variables out of efi_variable.c. Create common functions for reading variables from memory that both implementations can use on run-time. Then just use those functions in the run-time variants of the OP-TEE based EFI variable implementation and initialize the memory buffer on ExitBootServices() Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-31env: Add support for explicit write access listMarek Vasut
This option marks any U-Boot variable which does not have explicit 'w' writeable flag set as read-only. This way the environment can be locked down and only variables explicitly configured to be writeable can ever be changed by either 'env import', 'env set' or loading user environment from environment storage. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Discern environment coming from external storageMarek Vasut
Add another custom environment flag which discerns environment coming from external storage from environment set by U-Boot itself. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31env: Add H_DEFAULT flagMarek Vasut
Add another internal environment flag which indicates that the operation is resetting the environment to the default one. This allows the env code to discern between import of external environment and reset to default. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-31cmd: env: add env select commandPatrick Delaunay
Add the new command 'env select' to force the persistent storage of environment, saved in gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31cmd: env: add env load commandPatrick Delaunay
Add the new command env load to load the environment from the current location gd->env_load_prio. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: the ops driver load becomes mandatory in struct env_driverPatrick Delaunay
The ops driver load becomes mandatory in struct env_drive, change the comment for this ops and remove unnecessary test. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31env: add prototypes for weak functionPatrick Delaunay
This patch adds prototypes for several weak functions: - env_ext4_get_intf - env_ext4_get_dev_part - env_get_location It solves the following warnings when compiling with W=1 on stm32mp1 board: board/st/stm32mp1/stm32mp1.c:849:19: warning: no previous prototype for 'env_get_location' [-Wmissing-prototypes] enum env_location env_get_location(enum env_operation op, int prio) ^~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:876:13: warning: no previous prototype for 'env_ext4_get_intf' [-Wmissing-prototypes] const char *env_ext4_get_intf(void) ^~~~~~~~~~~~~~~~~ board/st/stm32mp1/stm32mp1.c:889:13: warning: no previous prototype for 'env_ext4_get_dev_part' [-Wmissing-prototypes] const char *env_ext4_get_dev_part(void) ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-29Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
2020-07-29drivers: tee: broadcom: add optee based bnxt fw load driverVikas Gupta
Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: pinctrl: add ns3 pads definitionRayagonda Kokatanur
Add NS3 pads definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add support for flashing imagesBharat Gooty
Add support for flashing images into QSPI and eMMC. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29include/configs: ns3: add env variables for Linux bootBharat Gooty
Add env variables and commands for booting Linux. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add ddr memory definitionRayagonda Kokatanur
Add ddr memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29dt-bindings: memory: ns3: add memory definitionsRayagonda Kokatanur
Add NS3 memory definitions. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: ns3: add support for Broadcom Northstar 3Rayagonda Kokatanur
Add support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29board: mediatek: Use CONFIG_DEFAULT_FDT_FILE for default environmentDavid Woodhouse
Rather than hard-coding it to the Banana Pi R2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-29arm: add (default) config for nanopi2 boardStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29arm: qemu: override flash accessors to use virtualizable instructionsArd Biesheuvel
Some instructions in the ARM ISA have multiple output registers, such as ldrd/ldp (load pair), where two registers are loaded from memory, but also ldr with indexing, where the memory base register is incremented as well when the value is loaded to the destination register. MMIO emulation under KVM is based on using the architecturally defined syndrome information that is provided when an exception is taken to the hypervisor. This syndrome information describes whether the instruction that triggered the exception is a load or a store, what the faulting address was, and which register was the destination register. This syndrome information can only describe one destination register, and when the trapping instruction is one with multiple outputs, KVM throws an error like kvm [615929]: Data abort outside memslots with no valid syndrome info on the host and kills the QEMU process with the following error: U-Boot 2020.07-rc3-00208-g88bd5b179360-dirty (Jun 06 2020 - 11:59:22 +0200) DRAM: 1 GiB Flash: error: kvm run failed Function not implemented R00=00000001 R01=00000040 R02=7ee0ce20 R03=00000000 R04=7ffd9eec R05=00000004 R06=7ffda3f8 R07=00000055 R08=7ffd9eec R09=7ef0ded0 R10=7ee0ce20 R11=00000000 R12=00000004 R13=7ee0cdf8 R14=00000000 R15=7ff72d08 PSR=200001d3 --C- A svc32 QEMU: Terminated This means that, in order to run U-Boot in QEMU under KVM, we need to avoid such instructions when accessing emulated devices. For the flash in particular, which is a hybrid between a ROM (backed by a read-only KVM memslot) when in array mode, and an emulated MMIO device (when in write mode), we need to take care to only use instructions that KVM can deal with when they trap. So override the flash read accessors that are used when running on QEMU under KVM. Note that the the 64-bit wide read and write accessors have been omitted: they are never used when running under QEMU given that it does not emulate CFI flash that supports it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2020-07-28dm: remove superfluous comment for union ofnode_unionHeinrich Schuchardt
"future live tree" does not make sense anymore as we have CONFIG_OF_LIVE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-28dm: button: add an uclass for buttonPhilippe Reynes
Add a new uclass for button that implements two functions: - button_get_by_label - button_get_status Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28dm: Fix build error when OF_CONTROL is not setDan Murphy
With OF_CONTROL disabled the build fails for include/dm/read.h:932:10: error: ‘ENOTSUPP’ undeclared (first use in this function) 932 | return -ENOTSUPP; Fixes: 45224e8f2691 ("dm: core: gracefully handle alias seq without of") Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-07-28configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigsPeng Fan
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28configs: Remove dead CONFIG optionsAdam Ford
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28stm32mp1: use the command env info -q in env_checkPatrick Delaunay
Activate the new option -q in command "env info" to avoid unnecessary trace during boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27dm: Fix build error when OF_CONTROL is not setDan Murphy
With OF_CONTROL disabled the build fails for include/dm/read.h:932:10: error: ‘ENOTSUPP’ undeclared (first use in this function) 932 | return -ENOTSUPP; Fixes: 45224e8f2691 ("dm: core: gracefully handle alias seq without of") Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
2020-07-27Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- Convert dc2114x driver to DM.
2020-07-27pci_ep: Add the init functionXiaowei Bao
Some EP deivces need to initialize before RC scan it, e.g. NXP layerscape platform, so add the init function in pci_ep uclass. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: instantiate the RNG with prediciton resistanceMichael Walle
If it is already instantiated tear it down first and then reinstanciate it again with prediction resistance. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-24 13:36:48 +0000