summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-02-22ppc4xx: Support for ATI Radeon 9200 card on sequoiaAnatolij Gustschin
Adds configuration option for ATI Radeon 9200 card support to sequoia config file. If CONFIG_VIDEO is enabled, TEXT_BASE should be changed to 0xFFF80000. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-22Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk
2008-02-22Merge branch 'master' of git://www.denx.de/git/u-boot-freebsdWolfgang Denk
2008-02-22Remove duplicate defines for ARRAY_SIZEKumar Gala
A few duplicate of the ARRAY_SIZE macro sneaked in since we put the define in common.h. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-21API: Add (c) and licensing notice to the public API header.Rafal Jaworowski
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
2008-02-2086xx: Fix GUR PCI config registers properly.Jon Loeliger
Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where I tried to "8610HPCD: Fix typos in two PCI setup registers", I botched it due to not realizing that 8610 and 8641 had different Global Utility Register defintions, one of which was like 85xx, and the other wasn't. Correct this problem by introducing two symbols, one for each 86xx SoC, but neither of which is named anything like 85xx. My bad. Lovely Wednesday with git bisect. You know. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-208610HPCD: Don't use VIDEO/CFB_CONSOLE by default.Jon Loeliger
Without an actual supported video card hooked up, enabling the CONFIG_VIDEO by default just makes it look broken by routing all console output to the video card. Don't. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-198610HPCD: Fix typos in two PCI setup registers.Jon Loeliger
The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA were erroneously present as 85xx names and values, leftover from the clone wars. Fix this by removing the 85xx cruft from the 86xx codebase. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-1886xx: Convert sbc8641d to use libfdt.Jon Loeliger
This is the proper fix for a missing closing brace in the function ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. The ft_cpu_setup() function in mpc8641hpcn.c should have been removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, but was missed. Only, the sbc8641d was nominally still using it. It all got ripped out, and the funcality that was in ft_board_setup() was refactored to remove the CPU portions into the new file cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. Based loosely on an original patch from joe.hamman@embeddedspecialties.com Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-16ppc4xx: HCU4/5. Cleanup configsNiklaus Giger
- hcu4.h: Removed define of CONFIG_PPC405GPr - Corrected phy addresses - Fix boot variables - Respect line length of 80 chars Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2008-02-16ppc4xx: PPC405GPr fix missing register definitionsNiklaus Giger
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2008-02-16ppc4xx: Beautify configuration files for Sequoia and Korat boardsLarry Johnson
Signed-off-by: Larry Johnson <lrj@acm.org>
2008-02-15Merge branch '080131_artila' of git://linux-arm.org/u-boot-armdevPeter Pearse
2008-02-15Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdevPeter Pearse
2008-02-15Merge branch '070524_netstar' of git://linux-arm.org/u-boot-armdevPeter Pearse
2008-02-15Fix compile warning on lib_ppc/board.cAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-15Extend ATI Radeon driver to support more video modesAnatolij Gustschin
Adds ATI Radeon 9200 support for 1280x1024, 1024x768, 800x600, 640x480 at 24, 16 and 8 bpp. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-15xsengine: fix typo and few coding styleJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-15Merge ../custodiansWolfgang Denk
2008-02-15Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk
Conflicts: common/cmd_reginfo.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15Merge ../custodiansWolfgang Denk
2008-02-15Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-02-15Merge ../custodiansWolfgang Denk
2008-02-15Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk
2008-02-15Coding STyle cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15Merge branch 'master' of git://www.denx.de/git/u-boot-blackfinWolfgang Denk
Conflicts: Makefile doc/README.standalone Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14sh: Fix register address of SH7722Nobuhiro Iwamatsu
The address of SH7722 is wrong by old document. This patch fixes this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-02-1485xx, 86xx: Determine I2C clock frequencies and store in global_dataTimur Tabi
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-02-14TQM834x: clean up configurationWolfgang Denk
Get board name consistent with Linux and elsewhere; get rid of local network definitions etc. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14PPC: Use r2 instead of r29 as global data pointerWolfgang Denk
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14Merge commit 'wd/master'Jon Loeliger
2008-02-14Merge branch 'for-1.3.2'Stefan Roese
2008-02-14Support for Artila M-501 starter kitTimo Tuunainen
Kimmo Leppala / Sysart and Timo Tuunainen / Sysart
2008-02-14AT91CAP9 support : board/ filesStelian Pop
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14AT91CAP9 support : include/ filesStelian Pop
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14Update board NetStarPeter Pearse
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2008-02-14Mark board_init_[fr] as noreturnMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-14Fix remaining CONFIG_COMMANDSJean-Christophe PLAGNIOL-VILLARD
update comments Fix coding style Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-14Remove duplicate defines for ARRAY_SIZEKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-13Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbolsJon Loeliger
These replace direct structure references for IMMR sections. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-13Merge commit 'wd/master'Jon Loeliger
2008-02-12Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-02-12Get rid of "#undef DEBUG" from board config files.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-12Remove #undef DEBUG from MPC83xx board header filesTimur Tabi
Remove the "#undef DEBUG" line from all Freescale 83xx board header files. The inclusion of this line makes it impossible to enable debug code in other source files, because "#define DEBUG" typically needs to be defined before any header files are included. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-02-07ADS5121e: DDR2 init/timing update.Grzegorz Bernacki
Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-02-07Device tree updatesJohn Rigby
Changes to match 5121 device tree going mainline in 2.6.25. Change OF_SOC from "soc5121" to plain "soc". Remove unneeded "ref-frequency" fixups. Remove "address" enetaddr fixup. Add bus-frequency fixup for old OF_SOC so old kernels with old device trees will work with new u-boot with 66MHz IPS clock Signed-off-by: John Rigby <jrigby@freescale.com>
2008-02-07Change IPS freq to 66MHzJohn Rigby
Recommended frequency is 66MHz Change divider from 4 to 3. Signed-off-by: John Rigby <jrigby@freescale.com>
2008-02-07xsengine: rename board_post_init to board_late_initJean-Christophe PLAGNIOL-VILLARD
missing migration from "Cleanup of some init functions" in c837dcb1a316745092567bfe4fb266d0941884ff Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-05AVR32: Make SDRAM refresh rate configurableHaavard Skinnemoen
The existing code assumes the SDRAM row refresh period should always be 15.6 us. This is not always true, and indeed on the ATNGW100, the refresh rate should really be 7.81 us. Add a refresh_period member to struct sdram_info and initialize it properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will panic() until the refresh_period member is updated properly. Big thanks to Gerhard Berghofer for pointing out this issue. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05ATSTK1004: Fix comment about default load addressHaavard Skinnemoen
The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter wouldn't have worked anyway since the board can only access 4MB of SDRAM. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
generated by cgit (git 2.34.1) at 2025-01-09 06:22:16 +0000