summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-16mmc: add additional quirk for APP_CMD retryJoel Johnson
It was observed (on ClearFog Base) that sending MMC APP_CMD returned an error on the first attempt. The issue appears to be timing related since even inserting a puts() short debug entry before the execution added sufficient delay to receive success on first attempt. Follow the existing quirks pattern to retry if initial issuance failed so as to not introduce any delay unless needed. Signed-off-by: Joel Johnson <mrjoel@lixil.net>
2020-01-16powerpc/mpc85xx: drop eSDHC periperhal clock codeYangbo Lu
The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-15Include missing headers for asm-generic/sections.hSean Anderson
asm-generic/sections.h references ulong but does not include linux/types.h Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-15dma: Add stub of dma_memcpy and dma_get_deviceVignesh Raghavendra
Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is disabled. This avoids ifdefs in driver code using DMA APIs Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ram: add SDRAM driver for i.MXRT SoCsGiulio Benetti
Add SDRAM driver for i.MXRT SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14serial_lpuart: add support for i.MXRTGiulio Benetti
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14ARM: dts: imxrt1050: add dtsi fileGiulio Benetti
Add dtsi file for i.MXRT1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14clk: imx: add i.IMXRT1050 clk driverGiulio Benetti
Add i.MXRT1050 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14pico-imx7d: Convert to DM_ETHJoris Offouga
Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14imx: add imx8x based deneb boardAnatolij Gustschin
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14imx: add imx8x capricorn giedi boardAnatolij Gustschin
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14arm64: zynqmp: Move PANIC to KconfigMichal Simek
Convert another option Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14arm64: zynqmp: Add support for u-boot.itb generation with ATFMichal Simek
Follow i.MX, Sunxi, RISC-V and Rockchip to generate u-boot.itb which includes U-Boot proper, ATF and DTBs in FIT format. ZynqMP supports FIT for quite a long time but with using out of tree solution. The patch is filling this gap. Tested on zcu102, zcu104 and zcu100/Ultra96. zcu100/Ultra96 v2.2 ATF build by: make DEBUG=0 ZYNQMP_CONSOLE=cadence1 RESET_TO_BL31=1 PLAT=zynqmp bl31 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14ARM: zynq: Add jtag distro boot supportT Karthik Reddy
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14spl: atf: Enable option to rewrite bl2_plat_get_bl31_params()Michal Simek
Xilinx ZynqMP platform is passing information to ATF in private format and ATF bl31 parameters are not used. That's why enable option to rewrite this function by platform specific implementation. The patch also move and update kernel-doc format with missing parameters. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14board: xilinx: Add support for user configurable boot script offsetT Karthik Reddy
Currently "script_offset_f" env variable is hardcoded, this variable specifies from which offset of the flash boot.scr should be read/write. As flashes are of different sizes having a fixed offset makes it difficult to load other images into the flash which may overwrite the boot script or cannot utilize the full memory. This current fix creates a new config "CONFIG_BOOT_SCRIPT_OFFSET" which holds the offset address, overwrites the "script_offset_f" variable. Also removed existing variable with default values, as the default values are held by CONFIG_BOOT_SCRIPT_OFFSET Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-10arm/km: remove board KMCOGE3UNHolger Brunck
This target is out of maintenance and can be removed. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-10m68k: Drop CONFIG_MCFPIT supportTom Rini
All platforms currently use the "MCFTMR" DMA timer rather than the PIT timer, so drop the MCFPIT code. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Cc: Wolfgang Wegner <w.wegner@astro-kom.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2020-01-10configs: purge unneeded fec definesAngelo Durgehello
Remove unneeded fec-related defines after fec moved as dm. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini
- A small PR with MC8309 fixes from Rasmus.
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DFU updates
2020-01-08Merge tag 'efi-2020-04-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-08treewide: Remove CONFIG_SYS_UBOOT_START from configs board filesPatrice Chotard
As previous CONFIG_SYS_UBOOT_START is now set by default to CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START can be removed from include/configs board files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08power: Add new PMIC PCA9450 driverYe Li
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08dt-bindings: clock: add i.MX8MP clock headerPeng Fan
Add i.MX8MP clock header Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08powerpc: mpc83xx: convert CONFIG_FSL_ELBC to KconfigRasmus Villemoes
This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-07log: Include missing header for log.hSean Anderson
log.h references cmd_tbl_t but command.h was not included Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07Include missing headers for fdt_support.hSean Anderson
fdt_support.h is missing declarations for bd_t. Including asm/u-boot.h pulls in the definition. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-07dm: devres: Add a new OFDATA phaseSimon Glass
Since the ofdata_to_platdata() method can allocate resources, add it as a new devres phase. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Add testsSimon Glass
The devres functionality has very few users in U-Boot, but it still should have tests. Add a few basic tests of the main functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: test: Add a test driver for devresSimon Glass
Add a driver which does devres allocations so that we can write tests for devres. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Convert to use loggingSimon Glass
At present when CONFIG_DEBUG_DEVRES is enabled, U-Boot prints log messages to the console with every devres allocation/free event. This causes most tests to fail since the console output is not as expected. In particular this prevents us from adding a device to sandbox which uses devres in its bind method. Move devres over to use U-Boot's logging feature instead, and add a new category for devres. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07test: Add functions to find the amount of allocated memorySimon Glass
The malloc() implementations provides a way of finding out the approximate amount of memory that is allocated. Add helper functions to make it easier to access this and see changes over time. This is useful for tests that want to check if memory has been allocated or freed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: devres: Create a new devres header fileSimon Glass
At present these functions are lumped in with the core device functions. They have their own #ifdef to control their availability, so it seems better to split them out. Move them into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Add a new flag to track platform dataSimon Glass
We want to avoid allocating platform data twice. This could happen if device_probe() is called after device_ofdata_to_platdata() for the same device. Add a flag to track whether device_ofdata_to_platdata() has been called on a device. Check the flag to make sure it doesn't happen twice, and clear the flag when the data is freed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Export a new function to read platdataSimon Glass
Add a new internal function, device_ofdata_to_platdata() to handle allocating private space associated with each device and reading the platform data from the device tree. Call this new function from device_probe(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07dm: core: Add a comment for DM_FLAG_OF_PLATDATASimon Glass
This flag is missing a comment. Add one. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07common: Add a noisy assert()Simon Glass
Some U-Boot code uses BUG_ON() and WARN_ON() macros. These use __FILE__ which can include quite a large path, depending on how U-Boot is built. The existing assert() is only checked if DEBUG is enabled. Add a new one which is always checked, and prints a (smaller) error in that case. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07efi_rng_protocol: Install the efi_rng_protocol on the root nodeSughosh Ganu
Install the EFI_RNG_PROTOCOL implementation for it's subsequent use by the kernel for features like kaslr. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi: qemu: arm64: Add efi_rng_protocol implementation for the platformSughosh Ganu
Add support for the EFI_RNG_PROTOCOL routines for the qemu arm64 platform. EFI_RNG_PROTOCOL is an uefi boottime service which is invoked by the efi stub in the kernel for getting random seed for kaslr. The routines are platform specific, and use the virtio-rng device on the platform to get random data. The feature can be enabled through the following config CONFIG_EFI_RNG_PROTOCOL Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Changed SPDX header to use /* instead of //. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07virtio: rng: Add a random number generator(rng) driverSughosh Ganu
Add a driver for the virtio-rng device on the qemu platform. The device uses pci as a transport medium. The driver can be enabled with the following configs CONFIG_VIRTIO CONFIG_DM_RNG CONFIG_VIRTIO_PCI CONFIG_VIRTIO_RNG Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-01-07dm: rng: Add random number generator(rng) uclassSughosh Ganu
Add a uclass for reading a random number seed from a random number generator device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07image: Add IH_OS_EFI for EFI chain-load bootCristian Ciocaltea
Add a new OS type to be used for chain-loading an EFI compatible firmware or boot loader like GRUB2, possibly in a verified boot scenario. Bellow is sample ITS file that generates a FIT image supporting secure boot. Please note the presence of 'os = "efi";' line, which identifies the currently introduced OS type: / { #address-cells = <1>; images { efi-grub { description = "GRUB EFI"; data = /incbin/("bootarm.efi"); type = "kernel_noload"; arch = "arm"; os = "efi"; compression = "none"; load = <0x0>; entry = <0x0>; hash-1 { algo = "sha256"; }; }; }; configurations { default = "config-grub"; config-grub { kernel = "efi-grub"; signature-1 { algo = "sha256,rsa2048"; sign-images = "kernel"; }; }; }; }; Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: define all known warning status codesHeinrich Schuchardt
Of all warning status codes up to now only EFI_WARN_DELETE_FAILURE is defined. The patch adds the missing definitions for later usage. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-10 02:14:06 +0000