summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-09-27ti_armv7_common.h: Adjust malloc pool size in all cases.Tom Rini
Previously we had been adjusting CONFIG_SYS_MALLOC_LEN based on if CONFIG_DFU_MMC has been set or not. However, for quite some time this has not been the case as we often include <configs/ti_armv7_common.h> prior to setting CONFIG_DFU_MMC so we would always use 16MiB and then not have enough room for to DFU files. Given the amount of memory we always have, setting a minimum size of 32MiB for malloc is reasonable. However, in the SPL case not only do we not need that much we start running into overlap problems and then will fail to boot. Since we don't need 16MiB in the SPL case, bring this down to 8MiB. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26kconfig: introduce kconfig for UBIHeiko Schocher
move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-26armv7: ls1021a: Convert CONFIG_LS1_DEEP_SLEEP to Kconfig optionYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun
Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26driver: ddr: fsl_mmdc: Pass board parameters through data structureYork Sun
Instead of using multiple macros, a data structure is used to pass board-specific parameters to MMDC DDR driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-26armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun
Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25board: amcore: add update scriptsAngelo Dureghello
Add some useful update scripts. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v.2: - Fix syntax error on upgrade_jffs2 script
2016-09-24arm: mvebu: NAND support for DB-88F6820-AMCChris Packham
Enable the NAND interface on this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-24arm: mvebu: add DB-88F6820-AMC boardChris Packham
This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-23reset: add no-op stubs for optional reset controlMasahiro Yamada
My motivation for this patch is to make reset control handling optional for generic drivers. I want to add reset control to drivers/usb/host/ehci-generic.c, but it is used by several platforms, some will implement a reset controller driver, some will not. Add no-op stubs in order to avoid link error for drivers that implement reset controlling, but still it is optional. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23errno.h: sync error macros with linux 4.8-rc7Masahiro Yamada
For synchronization, import macros from - include/uapi/asm-generic/errno-base.h - include/uapi/asm-generic/errno.h - include/linux/errno.h of Linux 4.8-rc7. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada
Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23Move error macros from <asm-generic/errno.h> to <linux/errno.h>Masahiro Yamada
There are no files that include <asm-generic/errno.h> any more. Move error macro defines to include/linux/errno.h and remove include/asm-generic/errno.h. Going forward, please include <linux/errno.h> when you need error macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada
Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23Add <linux/errno.h> as a wrapper of <asm-generic/errno.h>Masahiro Yamada
This will be used to consolidate errno.h variants. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23treewide: use #include <...> to include public headersMasahiro Yamada
We are supposed to use #include <...> to include headers in the public include paths. We should use #include "..." only for headers in local directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-23ext4: Use helper function to access group descriptor and its fieldsStefan Brüns
The descriptor size is variable, thus array indices are not generically applicable. The larger group descriptors also contain e.g. high parts of block numbers, which have to be read and written. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23ext4: determine group descriptor size for 64bit featureStefan Brüns
If EXT4_FEATURE_INCOMPAT_64BIT is set, the descriptor can be read from the superblocks, otherwise it defaults to 32. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23ext4: Update ext2/3/4 superblock, group descriptor and inode structuresStefan Brüns
Most importantly, the superblock provides the used group descriptor size, which is required for the EXT4_FEATURE_INCOMPAT_64BIT. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2016-09-23ext4: Use correct value for inode size even on revision 0 filesystemsStefan Brüns
fs->inodesz is already correctly (i.e. dependent on fs revision) initialized in ext4fs_mount. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23ext4: Avoid corruption of directories with hash tree indexesStefan Brüns
While directories can be read using the old linear scan method, adding a new file would require updating the index tree (alternatively, the whole tree could be removed). Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23ext4: fix possible crash on directory traversal, ignore deleted entriesStefan Brüns
The following command triggers a segfault in search_dir: ./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ; ext4write host 0 0 /./foo 0x10' The following command triggers a segfault in check_filename: ./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ; ext4write host 0 0 /. 0x10' "." is the first entry in the directory, thus previous_dir is NULL. The whole previous_dir block in search_dir seems to be a bad copy from check_filename(...). As the changed data is not written to disk, the statement is mostly harmless, save the possible NULL-ptr reference. Typically a file is unlinked by extending the direntlen of the previous entry. If the entry is the first entry in the directory block, it is invalidated by setting inode=0. The inode==0 case is hard to trigger without crafted filesystems. It only hits if the first entry in a directory block is deleted and later a lookup for the entry (by name) is done. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-23ext4: fix endianess problems in ext4 write supportMichael Walle
All fields were accessed directly instead of using the proper byte swap functions. Thus, ext4 write support was only usable on little-endian architectures. Fix this. Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23ext4: use kernel names for byte swapsMichael Walle
Instead of __{be,le}{16,32}_to_cpu use {be,le}{16,32}_to_cpu. Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23ext4: change structure fields to __le/__be typesMichael Walle
Change all the types of ext2/4 fields to little endian types and all the JBD fields to big endian types. Now we can use sparse (make C=1) to check for statements where we need byteswaps. Signed-off-by: Michael Walle <michael@walle.cc>
2016-09-23fs/fat: Do not write unmodified fat entries to diskStefan Brüns
The code caches 6 sectors of the FAT. On FAT traversal, the old contents needs to be flushed to disk, but only if any FAT entries had been modified. Explicitly flag the buffer on modification. Currently, creating a new file traverses the whole FAT up to the first free cluster and rewrites the on-disk blocks. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-22Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-09-22ns16650: Make sure we have CONFIG_CLK set before using infrastructureTom Rini
We cannot call on the CONFIG_CLK based clk_get_rate function unless CONFIG_CLK is set. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-22Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2016-09-22Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-09-22rockchip: rk3288: skip lowlevel_init processXu Ziyuan
lowlevel_init() is never needed for rk3288, so drop it. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-09-22config: rk3399: add usb related configsMengDongyang
This patch to enable configs for usb module - xhci - ehci - usb storage - usb net Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Squashed in patch to move to Kconfig: https://patchwork.ozlabs.org/patch/672543/ Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-22usb: xhci-rockchip: add rockchip dwc3 controller driverMengDongyang
This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-22configs: fsl: Move SPI/SPI-FLASH configs to defconfigJagan Teki
Moved FSL_QSPI/SPI/SPI-FLASH configs from include/configs into respective used defconfigs. - CONFIG_FSL_QSPI - CONFIG_SPI_FLASH - CONFIG_SPI_FLASH_BAR - CONFIG_SPI_FLASH_STMICRO Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22zynqmp: Remove unnnecessary board config file for dc4Siva Durga Prasad Paladugu
Remove unnecessary board specific config file for DC4 board. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Use the same name for atf image everywhereMichal Simek
Use atf-uboot.ub image instead of atf.ub. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Enable CONFIG_AHCI via KconfigMichal Simek
Move CONFIG_AHCI to defconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for chip ID detectionMichal Simek
Chip ID needs to be known for loading bitstream because U-Boot checks ID from bitstream header in BIT format. BIN format is completely unchecked. The chipid is get from ATF via SMC. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMPSiva Durga Prasad Paladugu
Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Add support for DFU from SPLMichal Simek
SPL needs to have bigger stack size because of USB. Simple malloc needs to be disabled because dfu code requires different allocation functions. There is no space in OCM that's why random place in DDR is used. BOOTD must be disabled because it is causing compilation error. All variables are disabled and used only variables valid for DFU because they are simple huge. Including automatic variables added by CONFIG_ENV_VARS_UBOOT_CONFIG. Hardcode addresses for u-boot, atf, kernel and dtb just for SPL DFU code. Enable SPL DFU for zcu100. Create new usb_dfu_spl variable just to run Linux kernel loaded in SPL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Move BSS location to the beginning of ramMichal Simek
With SPL_DFU support memory layout needs to be cleanup that's why move bss to the start of memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Wire up both USBs available on ZynqMPMichal Simek
The second USB wasn't enabled. This patch fixes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-21clk.h: Add <asm/errno.h>Tom Rini
Since we return -ENOSYS in some cases we must have <asm/errno.> available. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-22spi: Remove SPI_RX_FASTJagan Teki
Removed SPI_RX_FAST since default read for spi slaves are always 1-wire fast read. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22spi: Use mode for rx mode flagsJagan Teki
Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-21Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2016-09-21Merge branch 'master' of http://git.denx.de/u-boot-mmcTom Rini
2016-09-21boston: Introduce support for the MIPS Boston development boardPaul Burton
This patch introduces support for building U-Boot to run on the MIPS Boston development board. This is a board built around an FPGA & an Intel EG20T Platform Controller Hub, used largely as part of the development of new CPUs and their software support. It is essentially the successor to the older MIPS Malta board. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
generated by cgit (git 2.34.1) at 2024-12-24 19:42:10 +0000