summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-09-16spi: Add spi_write_then_readJagan Teki
Add support for SPI synchronous write followed by read, this is common interface call from spi-nor to spi drivers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-09-14Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Assorted bugfixes
2019-09-13configs: ti: Add environment support commands for FIT loadingAndrew F. Davis
Some parts of these commands can be reused, add them to common files. Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13ARM: omapl138_lcdk: Remove dead codeAdam Ford
The header it littered with #ifdefs and #defines and that appear to be legacy associations to the older da850-evm and in some cases obsolete with either Kconfig or DM migrations. This patch removes these legacy references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-12Merge tag 'efi-2019-10-rc4-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc4 (4) Fixes for the EFI_FILE_PROTOCOL: * correctly iterate over directories * correct Unicode conversion of file names * parameter checks
2019-09-12board/lx2160a: Fix MC firmware loading for SD bootPankaj Bansal
During boot, u-boot reads MC, DPL, DPC firmware from SD card and copies to DDR. Update DDR addresses to which these firmwares are copied as per memory map of these firmwares on SD-card so that isolation between the regions of various firmwares is maintained to avoid geting overwritten. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12mmc: fsl_esdhc: Add emmc hs200 supportYinbo Zhu
Add eMMC hs200 mode for ls1028a, ls1012a, lx2160a. This increases eMMC performance. Tuning procedure is currently not supported. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-11usb: Add nonblock argument to submit_int_msgMichal Suchanek
This will be used to implement non-blocking keyboard polling in case of errors. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11usb: usb_submit_int_msg -> usb_int_msgMichal Suchanek
This aligns naming with usb_bulk_msg and usb_control_msg. Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-09arm: ti: Add missing "=" from previous fixTom Rini
While the original patch to fix a regression in distro boot for mmc on these platforms had the correct syntax, I broke the change while applying. Add back in the missing "=" here so that the syntax is correct. Reported-by: Andre Heider <a.heider@gmail.com> Fixes: 27e0f3bcf075 ("arm: ti: Fix regression in distro boot for mmc") Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-09efi_loader: volume name in EFI_FILE_PROTOCOL.GetInfo()Heinrich Schuchardt
We cannot determine the volume name in U-Boot. Instead of providing a dummy volume name in case of EFI_FILE_SYSTEM_INFO and EFI_UNSUPPORTED in case of EFI_FILE_SYSTEM_VOLUME_LABEL consistently return an empty string. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: EFI_FILE_PROTOCOL rev 2 stubHeinrich Schuchardt
The UEFI specification requires to implement version 2 of the EFI_FILE_PROTOCOL. Provide the missing functions as stubs. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: eliminate inline function ascii2unicode()Heinrich Schuchardt
ascii2unicode() can only convert characters 0x00-0x7f from UTF-8 to UTF-16. Use utf8_utf16_strcpy() instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-08Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Bug fixes to mmc_spi Add Aspeed SD driver Fix dw_mmc timeout calculation Fix timeout values passed to mmc_wait_dat0 sdhci dt caps/mask update [trini: Fix evb-ast2500_defconfig CONFIG_MMC line] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-07Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- Initial DM conversion
2019-09-06Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-bootTom Rini
- fix mailbox status register used for polling - fix bcm2835_sdhost to wait long enough for a transfer to complete - increase kernel image size from 8 MB to 64 MB on arm64 - add support for RPi4 - add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06rpi: increase SYS_BOOTM_LEN to 64M on ARM64Bonnans, Laurent
On AArch64, kernel images are not self-decompressing and easily exceed the 8MB limit. Signed-off-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
- ARM: exynos5: Try to boot on mmc2 before mmc0/1
2019-09-06dm: core: Add functions to read 64-bit dt propertiesT Karthik Reddy
This patch adds functions dev_read_u64_default & dev_read_u64 to read unsigned 64-bit values from devicetree. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-05efi_loader: correctly render CD-ROM device path nodesHeinrich Schuchardt
Correct the name of the partition size component in struct efi_device_path_cdrom_path. Render entry, start, and size when converting a CD-ROM device path node to text. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: Extract adding a conventional memory in separate routinePark, Aiden
Adding a conventional memory region to the memory map may require ram_top limitation and it can be also commonly used. Extract adding a conventional memory to the memory map in a separate routine for generic use. Signed-off-by: Aiden Park <aiden.park@intel.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: interrupts in simple network protocolHeinrich Schuchardt
GetStatus() must clear the interrupt status. Transmit() should set the TX interrupt. Receive() should clear the RX interrupt. Initialize() and Start() should clear the interrupt status. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05ARM: exynos5: Try to boot on mmc2 before mmc0/1Guillaume GARDET
As stated in commit a61a4a1db009e3e600258551a01b54c4f50ec103 with DM_MMC, exynos boards now enumarates external SD/MMC slot as mmc2, instead of mmc1 with legacy mode. Moving mmc2 before mmc1/0 restore the previous behavior of trying external SD/MMC before internal slot. Signed-off-by: Guillaume GARDET <guillaume.gardet@arm.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Anand Moon <linux.amoon@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-09-05mmc: Rename timeout parameters for clarificationSam Protsenko
It's quite hard to figure out time units for various function that have timeout parameters. This leads to possible errors when one forgets to convert ms to us, for example. Let's rename those parameters correspondingly to 'timeout_us' and 'timeout_ms' to prevent such issues further. While at it, add time units info as comments to struct mmc fields. This commit doesn't change the behavior, only renames parameters names. Buildman should report no changes at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-09-04env: net: U_BOOT_ENV_CALLBACKs should not depend on CMD_NETHeinrich Schuchardt
Some environment variables are relevant for networking. For these U_BOOT_ENV_CALLBACKs have been defined. When the corresponding environment variable is updated the callback updates the state of the network sub-system. In the UEFI subsystem we can use the network even if CONFIG_CMD_NET is not defined. Let the usage of the U_BOOT_ENV_CALLBACKs depend on CONFIG_NET and not on CONFIG_CMD_NET. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04net: make net_random_ethaddr() more randomMichael Walle
The net_random_ethaddr() tries to get some entropy from different startup times of a board. The seed is initialized with get_timer() which has only a granularity of milliseconds. We can do better if we use get_ticks() which returns the raw timer ticks. Using this we have a higher chance of getting different values at startup. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04net: dwc_et_qos: update weak function board_interface_eth_initPatrick Delaunay
Align the board and driver prototype for board_interface_eth_init to avoid execution issue (the interface_type parameter is defined as int or phy_interface_t). To have a generic weak function (it should be reused by other driver) I change the prototype to use directly udevice. This prototype is added in netdev.h to allow compilation check and avoid warning when compiling with W=1 on file board/st/stm32mp1/stm32mp1.c warning: no previous prototype for 'board_interface_eth_init'\ [-Wmissing-prototypes] int board_interface_eth_init(int interface_type, .... ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04net: introduce packet capture supportRamon Fried
Add support for capturing ethernet packets and storing them in memory in PCAP(2.4) format, later to be analyzed by any PCAP viewer software (IE. Wireshark) This feature greatly assist debugging network issues such as detecting dropped packets, packet corruption etc. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-03dm: cache: Add enable and disable ops for cache uclassRick Chen
Add cache enable/disable ops to the DM cache uclass driver Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03sifive-fu540: config: Add mmc0 as a boot target deviceAlistair Francis
Add the mmc0 device as a BOOT_TARGET_DEVICES. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-02sh: r2dplus: Switch to DM PCI driverMarek Vasut
Add DT entry for the DM PCI driver, update board configs and drop ad-hoc board init code for the PCI bus. Instead, let the DM PCI driver initialize and operate the hardware. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-31Revert "vexpress64: fvp dram: add DRAM configuration"Ryan Harkin
This reverts commit fc04b923541d984b1544056fd3bfa8129d4e5aac where the FVP DRAM configuration was added. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
Enable DM PCI for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, and MPC8548CDS
2019-08-28powerpc: MPC8548CDS: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: corenet_ds: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: P2041RDB: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: p1_p2_rdb: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled for P1020, P1021, P1024, P1025 and P2020 RDB boards. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T104xRDB: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T102xRDB: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T102xRDB: Remove the useless macro CONFIG_ARCH_T1040Hou Zhiqiang
Remove the macro CONFIG_ARCH_T1040 from the T102xRDB.h and the PCIE4 related macros, as there are only 3 PCIe controllers on T102x SoCs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T4240RDB: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28powerpc: T208xRDB: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-27Merge branch 'u-boot-stm32_20190827' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Fixes and update related to STM32MP1 platforms
2019-08-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
Support of device tree model for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and MPC8548CDS. Also support of i2c dm model.
2019-08-27image: add new "copro" image typePatrick Delaunay
Define new image type for coprocessor images. It is used in FIT to identify the files loaded with remoteproc command (elf or bin). Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-27pmu: stpmic1: change specific NVM api to MISCPatrick Delaunay
Use MISC u-class to export the NVM register (starting at 0xF8 offset) and avoid specific API. - SHADOW have offset < 0. - NVM have register > 0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27serial: stm32: remove unused includePatrick Delaunay
The "serial_stm32.h" is only used by drivers/serial/serial_stm32.c and it is the file ./drivers/serial/serial_stm32.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: Set bootdelay to 1Patrice Chotard
This allows to display splashcreen without waiting an extra delay of 2 seconds due to default value of bootdelay. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: add altbootcmdPatrick Delaunay
Add altbootcmad as it is used for - bootcountlimit - in mach-stm32mp/cpu.c for BOOT_RECOVERY mode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: support MTDPARTS only if neededPatrick Delaunay
MTD is only use if NAND or NOR driver is activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2025-01-04 09:31:16 +0000