summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-05-02dm: core: Add function to get child count of ofnode or deviceChunfeng Yun
This patch add function used to get the child count of a ofnode or a device Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01cmd/bedbug.c: Make bedbug_init have a return valueOvidiu Panait
Do this as a preparation for removing initr_bedbug wrapper from common/board_r.c. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01arm: enable distro boot for bananapi-r2Matthias Brugger
This patch enables distro boot for the bananapi-r2, based on a MediaTek mt7623n. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-01configs: migrate CONFIG_SYS_ARM_CACHE_* in KconfigPatrick Delaunay
Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py. Kconfig uses a choice between the 3 values supported in U-Boot, including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK (the default configuration). The patch also avoids to select simultaneously 2 configurations. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01arm: imx: Add support for Google's Coral Dev BoardAlifer Moraes
Add initial support for Google's Coral Dev Board based on i.MX8MQ. https://coral.ai/products/dev-board The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree: https://coral.googlesource.com/uboot-imx/ Co-developed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-05-01dt-bindings: pinctrl: imxrt1020: remove useless commentGiulio Benetti
A comment note has been left after completing pinctrl listing, so let's remove it since it's useless. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01treewide: Remove unused FSL QSPI config options for IMX platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. So, remove the unused config options now. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
2020-05-01config: apalis-imx8: Enable FEC TXC delayPhilippe Schenker
define FEC_ENET_ENABLE_TXC_DELAY to enable the delay on TXC line on the MAC. This has to be done in order to meet RGMII specs. According to RGMII specs the clock should get delayed so the edges of the clock are preferrably in the middle of the edges of data-lines so they can be sampled properly. Our PHY expects the MAC to delay TXC line, as it is also written in the spec. This patch makes sure the TXC delay on the FEC is enabled Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-05-01board: apalis_imx6: Add KSZ9131 phy skew settingsPhilippe Schenker
This patch adds skew register settings for KSZ9131. It checks first which phy is on the board and then applies the correct skew settings. Skew settings calculation for the KSZ9131: The i.MX6 SoC has an output skew tolerance of -100ps to 900ps. All PCB traces where routed exactly the same length so we can calculate the skew settings without taking the length into consideration. The traces are all length matched. RXC skew (PHY to MAC): - We use the 2ns DLL controlled delay on the PHY - We do not use the skew registers This results in the following values: RXC PHY fixed Delay 2000ps PHY Added Delay 0ps T_setup_R min 2.00ns T_setup_R typ 2.00ns T_setup_R max 2.00ns T_hold_R min 1.60ns T_hold_R typ 2.00ns T_hold_R max 2.40ns That means we are well within RGMII specs. TXC skew (MAC to PHY): - We use the 2ns DLL controlled delay on the PHY - We then subtract ~0.6ns with TXD[0:3] and TXC clock pad skew register in a resulting ~1.4ns delay. This results in the following values under consideration of the tolerances: TXC min TXC typ TXC max MAC min -100ps -100ps -100ps MAC max 900ps 900ps 900ps PHY fixed Delay 2000ps 2000ps 2000ps PHY added Delay -340ps -600ps -859ps T_setup_T min 1.56ns 1.30ns 1.04ns T_setup_T typ 2.06ns 1.80ns 1.54ns T_setup_T max 2.56ns 2.30ns 2.04ns T_hold_T min 1.04ns 1.30ns 1.56ns T_hold_T typ 1.94ns 2.20ns 2.46ns T_hold_T max 2.84ns 3.10ns 3.36ns This shows that T_hold_T min and T_setup_T min times are out of spec for RGMII timing. However the KSZ9131 has a minimal value for this time of 0.8ns which is met under all circumstances. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01net: phy: micrel: Add basic support for KSZ9131Philippe Schenker
This adds basic support for the new Micrel KSZ9131 phy. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01net: phy: micrel: Use defines for PHY_IDs and MASKPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01imx8: move SIP macro to common headerPeng Fan
Move the SIP macro to common header and unify the name to make others could reuse them. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01net: pcnet: Remove CONFIG_PCNET_79C97xMarek Vasut
These macros guard one switch-case statement, which grows mips malta by some 20 bytes if debug is enabled, and even less if it is not. To make the code simpler, just support all the NICs and be done with it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01net: Fix warning when including netdev.h on DM systemsMarek Vasut
If the DM_ETH is enabled and netdev.h is included somewhere, the struct eth_device may not be defined, yet it is used in the header file as an argument to fecmxc_register_mii_postcall. Add forward declaration to remove the warning. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01dt-bindings: power: rk3328-power: sync from upstream Linux kernelChen-Yu Tsai
This syncs the rk3328 power domain header file from Linux kernel next-20200324, to support newer hardware blocks when syncing the device tree files. The last non-merge commit to touch it was b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Loic Devulder <ldevulder@suse.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-05-01dt-bindings: clock: rk3328: sync from upstream Linux kernelChen-Yu Tsai
This syncs the rk3328 clock header file from Linux kernel next-20200324, to support newer hardware blocks when syncing the device tree files. The last non-merge commit to touch it was 0dc14b013f79 ("clk: rockchip: add clock id for watchdog pclk on rk3328") Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Loic Devulder <ldevulder@suse.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- distro boot support for SPI flash - sifive spi flash driver
2020-04-30Merge tag 'efi-2020-07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2 This pull request contains bug fixes needed due to the merged changes for EFI secure boot. Patches are supplied to identify EFI system partitions.
2020-04-30mtd: spi-nor: Enable QE bit for ISSI flashJagan Teki
Enable QE bit for ISSI flash chips. QE enablement logic is similar to what Macronix has, so reuse the existing code itself. Cc: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-30rk3399: Enable SF distro bootcmdJagan Teki
Enable SPI flash(SF) distro boot command in rk3399. This distro boot will read the boot script at specific location at the flash and start sourcing the same. Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- DM ACPI support (Part A) - Improve support for chain-loading x86 U-Boot
2020-04-30Merge tag 'xilinx-for-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.07-rc2 mmc: - Fix dt property handling via generic function clk: - Fix versal watchdog clock setting nand: - Fix zynq nand command comparison xilinx: - Enable ubifs - Sync board_late_init configurations with initrd_high setup - Make custom distro boot more verbose zynq: - Kconfig alignments - Fix nand cse configuration zynqmp: - Fix zcu104 low level qspi configuration - Small DT updates Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. - Add GICv3 support for ls1028a, ls2088a, ls1088a. - Add lpuart support on ls1028aqds. - Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms.
2020-04-30board: Add a gd flag for chain loadingSimon Glass
When U-Boot is run from another boot loader, much of the low-level init needs to be skipped. Add a flag for this and adjust ll_boot_init() to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30acpi: Move the xsdt pointer to acpi_ctxSimon Glass
Put this in the context along with the other important pointers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Put table-setup code in its own functionSimon Glass
We always write three basic tables to ACPI at the start. Move this into its own function, along with acpi_fill_header(), so we can write a test for this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30acpi: Move acpi_add_table() to generic codeSimon Glass
Move this code to a generic location so that we can test it with sandbox. This requires adding a few new fields to acpi_ctx, so drop the local variables used in the original code. Also use mapmem to avoid pointer-to-address casts which don't work on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Convert part of acpi_table to use acpi_ctxSimon Glass
The current code uses an address but a pointer would result in fewer casts. Also it repeats the alignment code in a lot of places so this would be better done in a helper function. Update write_acpi_tables() to make use of the new acpi_ctx structure, adding a few helpers to clean things up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Add a method to write tables for a deviceSimon Glass
A device may want to write out ACPI tables to describe itself to Linux. Add a method to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30x86: cbfs: Drop unwanted declarationSimon Glass
The intention here is add a forward declaration, not actually declare a variable. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30efi_loader: remove CONFIG_EFI_SECURE_BOOT in efi_loader.hAKASHI Takahiro
The guard doesn't make any difference, so remove it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: identify EFI system partitionHeinrich Schuchardt
In subsequent patches UEFI variables shalled be stored on the EFI system partition. Hence we need to identify the EFI system partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30part: detect EFI system partitionHeinrich Schuchardt
Up to now for MBR and GPT partitions the info field 'bootable' was set to 1 if either the partition was an EFI system partition or the bootable flag was set. Turn info field 'bootable' into a bit mask with separate bits for bootable and EFI system partition. This will allow us to identify the EFI system partition in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29driver: net: fm: add DM ETH supportMadalin Bucur
Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li
Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1046aqds: support distro bootBiwen Li
Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: freescale: ls1028a: mux changes for lpuartYuantian Tang
mux changes in board file to enable lpuart1 and macro define for lpuart1 used for mux changes in board configuation register 13 Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29rk3399: Add boot flash script offset, sizeJagan Teki
Most of the SPI flash devices in rockchip (rk3399) are 16MiB size. So, let's use the script offset at the end of 8K.  This way it cannot overlap any offsets being used by software components in flash layout. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-29environment: distro: Add SF distro commandJagan Teki
Add distro boot command support for SPI flash (SF). This distro boot will read the boot script at specific location at the flash and start sourcing the same. This file need to include on required include/config file. Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-29spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enumTudor Ambarus
Commit: 0ebb261a0b2d ("spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum") in linux. When defining spi_mem_op templates we don't necessarily know the size that will be passed when the template is actually used, and basing the supports_op() check on op->data.nbytes to know whether there will be data transferred for a specific operation is not possible. Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum so that we can base our checks on op->data.dir instead of op->data.nbytes. This also fixes a bug identified with the atmel-quaspi driver. The spi-nor core, when erasing sectors, fills the spi_mem_op template using SPI_MEM_OP_NO_DATA, which initializes all the data members with value zero. This is wrong because data.dir is treated as SPI_MEM_DATA_IN, which translates in our driver to read accesses for erases (RICR), while the controller expects write accesses (WICR). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29mtd: spi-nand: Import Toshiba SPI-NAND supportRobert Marko
Linux has good support for Toshiba SPI-NAND, so lets import it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen2 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC2/DWC3 improvements - Assorted bugfixes
2020-04-28Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dmTom Rini
Move Python tools to use absolute paths Minor buildman fixes for new features Make libfdt code more similar to upsteam
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1021a: Append CMA configuration to bootargsAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-21 08:04:08 +0000