summaryrefslogtreecommitdiff
path: root/lib/efi_loader/efi_runtime.c
AgeCommit message (Collapse)Author
2019-08-15efi_loader: do not call efi_runtime_detach twiceHeinrich Schuchardt
Commit 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") added a call to efi_runtime_detach() to ExitBootServices() but did not remove the call in SetVirtualAddressMap(). Remove the superfluous function call. Correct a comment referring to efi_runtime_detach(). Fixes: 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: parameter check in SetVirtualAddressMapHeinrich Schuchardt
Check the parameters DescriptorSize and DescriptiorVersion of SetVirtualAddressMap() as prescribed by the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: implement ConvertPointer()Heinrich Schuchardt
Implement the ConvertPointer() runtime service. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: definition of efi_virtual_address_map()Heinrich Schuchardt
Use efi_uintn_t where the UEFI spec uses UINTN. Use efi_uintn_t also for the result of the division of two efi_uintn_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: Change return type of efi_add_memory_map()Bryan O'Donoghue
We currently have some inconsistent use of efi_add_memory_map() throughout the code. In particular the return value of efi_add_memory_map() is not interpreted the same way by various users in the codebase. This patch does the following: - Changes efi_add_memory_map() to return efi_status_t. - Adds a method description to efi_add_memory_map(). - Changes efi_add_memory_map() to return EFI_SUCCESS - Returns non-zero for error in efi_add_memory_map() - Updates efi_allocate_pages() to new efi_add_memory_map() - Updates efi_free_pages() to new efi_add_memory_map() - Updates efi_carve_out_dt_rsv() to new efi_add_memory_map() - Updates efi_add_runtime_mmio() to new efi_add_memory_map() Fixes: 5d00995c361c ("efi_loader: Implement memory allocation and map") Fixes: 74c16acce30b ("efi_loader: Don't allocate from memory holes") Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Graf <agraf@csgraf.de> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. This requires allocating the event and the event list from runtime data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: efi_set_virtual_address_map_runtime()Heinrich Schuchardt
efi_set_virtual_address_map_runtime() must be of type __efi_runtime. Fixes: ee8ebaaaaedc ("efi_loader: split off detaching SetVirtualAddress()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: detach runtime in ExitBootServices()Heinrich Schuchardt
Linux can be called with a command line parameter efi=novamap, cf. commit 4e46c2a95621 ("efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted"). In this case SetVirtualAddressMap() is not called after ExitBootServices(). OpenBSD 32bit does not call SetVirtualAddressMap() either. Runtime services must be set to an implementation supported at runtime in ExitBootServices(). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: simplify detachingHeinrich Schuchardt
We do not need any array typed detach list. Let's simply update the pointers directly. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: decision on EFI_RT_SUPPORTED_RESET_SYSTEMHeinrich Schuchardt
Move the logic determining which board supports reset at runtime to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: split off detaching SetVirtualAddress()Heinrich Schuchardt
The runtime services SetVirtualAddress() and ConvertPointer() become unavailable after SetVirtualAddress(). Other runtime services become unavailable after ExitBootServices. Move the update of SetVirtualAddress() and ConvertPointer() to efi_relocate_runtime_table(). Use functions with the correct signature when detaching. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: unimplemented runtime servicesHeinrich Schuchardt
Unimplemented runtime services should always return EFI_UNSUPPORTED as described in the UEFI 2.8 spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: let the variable driver patch out the runtimeHeinrich Schuchardt
Our variable services are only provided at boottime. Therefore when leaving boottime the variable function are replaced by dummy functions returning EFI_UNSUPPORTED. Move this patching of the runtime table to the variable services implementation. Executed it in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: clean up runtime detachingHeinrich Schuchardt
The detaching of the runtime will have to move to ExitBootServices() to encompass operating system that do not call SetVirtualAddressMap(). This patch changes the logic for the relocation of the pointers in the runtime table such that the relocation becomes independent of the entries in the detach list. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove NULL entries from runtime detach listHeinrich Schuchardt
Some entries in the system table are set to NULL in ExitBootServices(). We had them in the runtime detach list to avoid relocation of NULL. Let's instead assign the pointers dynamically in efi_initialize_system_table() to avoid the relocation entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: move efi_query_variable_info()Heinrich Schuchardt
Let's keep similar things together. Move efi_query_variable_info() to lib/efi_loader/efi_variable.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: GetTime() must return EFI_UNSUPPORTEDHeinrich Schuchardt
If the GetTime() runtime service is not supported, EFI_UNSUPPORTED has to be returned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: add RuntimeServicesSupported variableAKASHI Takahiro
This variable is defined in UEFI specification 2.8, section 8.1. Its value should be updated whenever we add any usable runtime services function. Currently we only support SetVirtualAddress() for all systems and ResetSystem() for some. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_loader: event signaling in ExitBootServicesHeinrich Schuchardt
ExitBootServices() has to stop timer related activity before calling the events of the EFI_EVENT_GROUP_EXIT_BOOT_SERVICES event group. But our current implementation was stopping all other events. All events have to observe the task priority level. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01efi_loader: Kconfig entries for GetTime(), SetTime()Heinrich Schuchardt
The GetTime() and the SetTime() runtime services are not obligatory. So let's make them customizable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31efi_loader: handling of daylight saving timeHeinrich Schuchardt
If SetTime() is meant to set daylight saving time it will be called with Time.Daylight == EFI_TIME_ADJUST_DAYLIGHT | EFI_TIME_IN_DAYLIGHT. Return 0 from GetTime() if time is not in daylight because we cannot determine if we are in a time zone with daylight saving time. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31efi_loader: check time in SetTime()Heinrich Schuchardt
The UEFI spec prescribes that we check that the timestamp passed to SetTime() is checked for validity. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi_loader: return values of GetTime()Heinrich Schuchardt
According to the UEFI spec 2.8 the GetTime() runtime service should return EFI_UNSUPPORTED if the real time clock is not available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi_loader: implement SetTimeHeinrich Schuchardt
Implement the SetTime() runtime service. Extend the real time clock selftest to check setting the clock. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-13efi_loader: efi_add_runtime_mmio()Heinrich Schuchardt
The first parameter of efi_add_runtime_mmio() is a pointer to a pointer. This should be reflected in the documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-23efi_loader: Make RTS relocation more robustAlexander Graf
While changing the RTS alignment to 64KB in commit 7a82c3051c8f ("efi_loader: Align runtime section to 64kb") the relocation code started to break. The reason for that is that we didn't actually look at the real relocation data. We merely took the RUNTIME_CODE section as a hint and started to relocate based on self calculated data from that point on. That calculation was now out of sync though. To ensure we're not running into such a situation again, this patch makes the runtime relocation code a bit more robust. We can just trust the phys/virt hints from the payload. We also should check that we really only have a single section, as the code doesn't handle multiple code relocations yet. Fixes: 7a82c3051c8f ("efi_loader: Align runtime section to 64kb") Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reported-by: Loic Devulder <ldevulder@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Loic Devulder <ldevulder@suse.de> Tested-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: SetVirtualAddressMap() should return EFI_UNSUPPORTEDAKASHI Takahiro
See UEFI specification 2.7, section 8.4. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: correct a function prototype of QueryCapsuleCapabilities()AKASHI Takahiro
See UEFI specification v2.7, section 8.5.3. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02efi_loader: Handle RELA absolute relocations properlyAlexander Graf
With RELA absolute relocations, the relocation target contains our link offset which we need to remove from the equation again. We did this properly in the relative relocation path, but not in the absolute one. So let's do this for the absolute one as well. That way, u-boot can have a TEXT_OFFSET of != 0 and still relocate itself properly. This fixes a bug where efi_loader did not work on the RISC-V QEMU port. With this patch, I can successfully run UEFI applications on the RISC-V QEMU port. Reported-by: Auer, Lukas <lukas.auer@aisec.fraunhofer.de> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-02efi_loader: implement EFI_RESET_SHUTDOWN at boot timeHeinrich Schuchardt
Allow an EFI application to shut down the system. If EFI_RESET_SHUTDOWN is issued call do_poweroff(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: fix relocation on x86_64Heinrich Schuchardt
Currently the relocation of the EFI runtime on x86_64 fails. This renders the EFI subsystem unusable. The ELF relocation records for x86_64 contain an addend field. Always write the function name into error messages related to the EFI runtime relocation. Break an excessively long line. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: description efi_update_capsule()Heinrich Schuchardt
Correct the description of efi_update_capsule(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: fix typos in efi_runtime.cHeinrich Schuchardt
Fix multiple typos Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-20efi_loader: document runtime functionsHeinrich Schuchardt
Add comments for runtime service functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-20efi_loader: update runtime services table crc32Heinrich Schuchardt
The crc32 of the runtime services table must be updated after detaching. efi_update_table_header_crc32() must be __efi_runtime. So move it to efi_runtime.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-20efi_loader: relocate pointer to tablesHeinrich Schuchardt
When applying a virtual memory map we have to update the pointer to the list of configuration tables. Fixes: 4182a129ef73 ("efi_loader: allocate configuration table array") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: complete implementation of GetTime()Heinrich Schuchardt
Implement the missing parts of the GetTime() runtime service. Fill seconds. Fill daylight saving time flag correctly. Provide dummy values for capabilities. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: remove unused efi_get_time_init()Heinrich Schuchardt
Remove unused function efi_get_time_init(). Initialization of the RTC has to be done in board bring up not in the EFI subsystem. There is no RTC device in the UEFI spec. The RTC is only accessed through the runtime services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: correct headersize EFI tablesHeinrich Schuchardt
The headersize field has to be set to the size of the whole table including the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: specify UEFI spec revisionHeinrich Schuchardt
Both in the boot and the runtime services tables we have to specify the UEFI spec revision. The same value is already used for the system table. So let's use a common constant. In the boot services table we have to provide the header signature. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: Use common elf.h reloc definesAlexander Graf
Now that elf.h contains relocation defines for all architectures we care about, let's just include it unconditionally and refer to the defines. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25efi_loader: Move to compiler based target architecture determinationAlexander Graf
Thanks to CONFIG_SANDBOX, we can not rely on config options to tell us what CPU architecture we're running on. The compiler however does know that, so let's just move the ifdefs over to compiler based defines rather than kconfig based options. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-14efi: Add a comment about duplicated ELF constantsSimon Glass
These constants are defined in arch-specific code but redefined here. Add a TODO to clean this up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: adjust definitions of variable servicesHeinrich Schuchardt
The definitons of the variable services are adjusted: - use efi_uintn_t instead of unsigned long - use u16 * instead of s16 * for Unicode strings - correct definition of QueryVariableInfo - rename efi_get_next_variable to efi_get_next_variable_name Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: remove unnecessary includeHeinrich Schuchardt
asm/global_data.h is already included via common.h. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-29efi_loader: Enable RISC-V supportRick Chen
We have almost all pieces needed to support RISC-V UEFI binaries in place already. The only missing piece are ELF relocations for runtime code and data. This patch adds respective support in the linker script and the runtime relocation code. It also allows users to enable the EFI_LOADER configuration switch on RISC-V platforms. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-29efi_loader: Use EFI_CACHELINE_SIZE in the image loader tooAlexander Graf
We were using our EFI_CACHELINE_SIZE define only in the runtime service code, but left the image loader to use plain CONFIG_SYS_CACHELINE_SIZE. This patch moves EFI_CACHELINE_SIZE into efi_loader.h and converts the image loader to use it. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-10SPDX: Convert a few files that were missed beforeTom Rini
As part of the main conversion a few files were missed. These files had additional whitespace after the '*' and before the SPDX tag and my previous regex was too strict. This time I did a grep for all SPDX tags and then filtered out anything that matched the correct styles. Fixes: 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style") Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04efi_loader: Fix return value for efi_add_runtime_mmioAlexander Graf
The efi_add_runtime_mmio function incorrectly returned the added address as return value rather than EFI_SUCCESS. Fix it by checking the return value of efi_add_memory_map properly. Fixes: f057cfef5dc ("efi_loader: exit status for efi_reset_system_init") Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04efi_loader: add missing EFI_RESET_PLATFORM_SPECIFICHeinrich Schuchardt
EFI_RESET_PLATFORM_SPECIFIC is one of the values that can be used for the EFI service ResetSystem. The missing definition is added. The value has to handled in efi_reset_system(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-29 04:41:41 +0000