summaryrefslogtreecommitdiff
path: root/lib/efi_loader
AgeCommit message (Collapse)Author
2018-01-22efi_loader: fix ExitBootServicesHeinrich Schuchardt
This patch lets the implementation of ExitBootServices conform to the UEFI standard. The timer events must be disabled before calling the notification functions of the exit boot services events. The boot services must be disabled in the system table. The handles in the system table should be defined as efi_handle_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add check_tpl parameter to efi_signal_eventHeinrich Schuchardt
In ExitBootServices we need to signal events irrespective of the current TPL level. A new parameter check_tpl is added to efi_signal_event(). Function efi_console_timer_notify() gets some comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide function to get last node of a device pathHeinrich Schuchardt
On a block device and its partitions the same protocols can be installed. To tell the apart we can use the type of the last node of the device path which is not the end node. The patch provides a utility function to find this last node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitionsHeinrich Schuchardt
Add the revision constants. Depending on the revision additional fields are needed in the media descriptor. Use efi_uintn_t for number of bytes to read or write. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_disk_create_partitions a global symbolHeinrich Schuchardt
Up to now we have been using efi_disk_create_partitions() to create partitions for block devices that existed before starting an EFI application. We need to call it for block devices created by EFI applications at run time. The EFI application will define the handle for the block device and install a device path protocol on it. We have to use this device path as stem for the partition device paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide a function to create a partition nodeHeinrich Schuchardt
Provide new function efi_dp_part_node() to create a device node for a partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_block_io_guid a global symbolHeinrich Schuchardt
The GUID of the EFI_BLOCK_IO_PROTOCOL is needed in different code parts. To avoid duplication make efi_block_io_guid a global symbol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: efi_disk_register: correctly determine if_type_nameHeinrich Schuchardt
The interface type name can be used to look up the interface type. Don't confound it with the driver name which may be different. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix StartImage bootserviceHeinrich Schuchardt
The calling convention for the entry point of an EFI image is always 'asmlinkage'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: check tables in helloworld.efiHeinrich Schuchardt
Check if the device tree and the SMBIOS table are available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: allocate correct memory type for EFI imageHeinrich Schuchardt
The category of memory allocated for an EFI image should depend on its type (application, bootime service driver, runtime service driver). Our helloworld.efi built on arm64 has an illegal image type. Treat it like an EFI application. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: print device path when entering efi_load_imageHeinrich Schuchardt
Use %pD to print the device path instead of its address when entering efi_load_image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct find simple file system protocolHeinrich Schuchardt
In contrast to the description the code did not split the device path into device part and file part. The code should use the installed protocol and not refer to the internal structure of the the disk object. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: address of the simple file system protocolHeinrich Schuchardt
When installing the the simple file system protocol we have to path the address of the structure and not the address of a pointer to the structure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: return NULL from device path functionsHeinrich Schuchardt
For the construction of device paths we need to call the AllocatePool service. We should not ignore if it fails due to an out of memory situation. This patch changes the device path functions to return NULL if the memory allocation fails. Additional patches will be needed to fix the callers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: consistently use efi_handle_t for handlesHeinrich Schuchardt
We should consistently use the efi_handle_t typedef when referring to handles. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: disconnect controllers in UninstallProtocolHeinrich Schuchardt
The UninstallProtocol boot service should first try to disconnect controllers that have been connected with EFI_OPEN_PROTOCOL_BY_DRIVER. If the protocol is still opened by an agent, it should be closed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement DisconnectControllerHeinrich Schuchardt
Unfortunately we need a forward declaration because both OpenProtocol and CloseProtocol have to call DisconnectController. And DisconnectController calls both OpenProtcol and CloseProtocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix signature of efi_disconnect_controllerHeinrich Schuchardt
Handles should be passed as efi_handle_t and not as void *. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement ConnectControllerHeinrich Schuchardt
Implement the ConnectController boot service. A unit test is supplied in a subsequent patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: debug output installed device pathHeinrich Schuchardt
When a device path protocol is installed write the device path to the console in debug mode. For printing the new macro EFI_PRINT is used, which can be reused for future diagnostic output. Remove unused EFI_PRINT_GUID macro Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: implement OpenProtocolInformationHeinrich Schuchardt
efi_open_protocol_information provides the agent and controller handles as well as the attributes and open count of an protocol on a handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix counting error] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: open_info in CloseProtocolHeinrich Schuchardt
efi_open_protocol and efi_close_protocol have to keep track of opened protocols. Check if the protocol was opened for the same agent and controller. Remove all open protocol information for this pair. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: open_info in OpenProtocolHeinrich Schuchardt
efi_open_protocol has to keep track of opened protocols. OpenProtocol enters the agent and controller handle information into this list. A unit test is supplied with a subsequent patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: list of open protocol infosHeinrich Schuchardt
Add a list of open protocol infos to each protocol of a handle. Provide helper functions to access the list items. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: simplify efi_remove_all_protocolsHeinrich Schuchardt
Replace list_for_each_safe() and list_entry() by list_for_each_entry_safe(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correctly call imagesHeinrich Schuchardt
Avoid a failed assertion when an EFI app calls an EFI app. Avoid that the indent level increases when calling 'bootefi hello' repeatedly. Avoid negative indent level when an EFI app calls an EFI app that calls an EFI app (e.g. iPXE loads grub which starts the kernel). Return the status code of a loaded image that returns without calling the Exit boot service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: text output for device path end nodeHeinrich Schuchardt
Without the patch a device path consisting only of an end node is displayed as '/UNKNOWN(007f,00ff)'. It should be displayed as '/'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: use correct format string for unsigned longHeinrich Schuchardt
virt_size is of type unsigned long. So it should be printed with %ul. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add comments to memory functionsHeinrich Schuchardt
Add comments describing memory functions. Fix the formatting of a function declaration. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: use wide string do define firmware vendorHeinrich Schuchardt
As the U-Boot is compiled with -fshort-wchar we can define the firmware vendor constant as wide string. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: support device path for IDE and SCSI disksHeinrich Schuchardt
Correctly create the device path for IDE and SCSI disks. Support for SATA remains to be done in a future patch. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: create full device path for block devicesHeinrich Schuchardt
When creating the device path of a block device it has to comprise the block device itself and should not end at its parent. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-19efi_loader: Setup logical_partition media informationEmmanuel Vadot
When adding a partition, set the logical_partition member in the media structure as mandated by the UEFI spec. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-12-16efi_loader: comments for dp_part_fill()Heinrich Schuchardt
Add a description for dp_part_fill(). Reword a comment in the function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: correct DeviceNodeToText for media typesHeinrich Schuchardt
When converting device nodes and paths to text we should stick to the UEFI spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: correctly setup device paths for block devicesHeinrich Schuchardt
According to the UEFI spec the numbering of partitions has to start with 1. Partion number 0 is reserved for the optional device path for the complete block device. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: correctly determine if an MMC device is an SD-cardHeinrich Schuchardt
The SD cards and eMMC devices have different device nodes. The current coding interpretes all MMC devices as eMMC. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: error handling in efi_load_image()Heinrich Schuchardt
If a failure occurs when trying to load an image, it is insufficient to free() the EFI object. We must remove it from the object list, too. Otherwise a use after free will occur the next time we iterate over the object list. Furthermore errors in setting up the image should be handled. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: new function efi_delete_handle()Heinrich Schuchardt
Provide a function to remove a handle from the object list after removing all protocols. To avoid forward declarations other functions have to move up in the coding. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: return status from efi_setup_loaded_image()Heinrich Schuchardt
efi_setup_loaded_image() should return an error code indicating if an error has occurred. An error occurs if a protocol cannot be installed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: Ensure efi_dp_find_obj() finds exact matchesAlexander Graf
When calling efi_dp_find_obj(), we usually want to find the *exact* match of an object for a given device path. However, I ran into a nasty corner case where I had the following objects with paths available: Handle 0x9feffa70 /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire Handle 0x9feffb58 /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire and was searching for /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire But because our device path search looked for any substring match, it would return /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire because that path is a full substring of the path we were searching for. So this patch adapts the device path search logic to always look for exact matches first. The way we distinguish between those cases is by looking at whether our caller actually deals with remainders. As a side effect, the code as is from all I can tell now never does a substring match anymore, because it always gets called with rem=NULL, so we always only do exact matches now. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-16efi_loader: helloworld.c: Explicitly use .rodata for loaded_image_guidAlexander Graf
Commit bbf75dd9345d0b ("efi_loader: output load options in helloworld") introduced a const variable in efi_main() called loaded_image_guid which got populated from a constant struct. While you would usually expect a compiler to realize that this variable should really just be a global pointer to .rodata, gcc disagrees and instead puts it on the stack. Unfortunately in some implementations of gcc it does so my calling memcpy() which we do not implement in our hello world environment. So let's explicitly move it to a global variable which in turn puts it in .rodata reliably and gets rid of the memcpy(). Fixes: bbf75dd9345d0b ("efi_loader: output load options in helloworld") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-01efi_loader helloworld.efi: Fix building with -OsAlexander Graf
Depending on your compiler, when compiling the hello world efi binary with -Os, gcc might think it's a smart idea to replace common patterns such as memory copies with explicit calls to memcpy(). While that sounds great at first, we don't have any memcpy() available in our helloworld build target. So let's indicate to gcc that we really do want to have the code be built as freestanding. Fixes: bbf75dd9 ("efi_loader: output load options in helloworld") Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: Fix partition offsetsAlexander Graf
Commit 884bcf6f65 (efi_loader: use proper device-paths for partitions) tried to introduce the el torito scheme to all partition table types: Spawn individual disk objects for each partition on a disk. Unfortunately, that code ended up creating partitions with offset=0 which meant that anyone accessing these objects gets data from the raw block device instead of the partition. Furthermore, all the el torito logic to spawn devices for partitions was duplicated. So let's merge the two code paths and give partition disk objects good offsets to work from, so that payloads can actually make use of them. Fixes: 884bcf6f65 (efi_loader: use proper device-paths for partitions) Reported-by: Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: add missing breaksRob Clark
Otherwise with GUID partition types you would end up with things like: .../HD(Part0,Sig6252c819-4624-4995-8d16-abc9cd5d4130)/HD(Part0,MBRType=02,SigType=02) Signed-off-by: Rob Clark <robdclark@gmail.com> [agraf: rebased] Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: comments for EFI_DEVICE_PATH_TO_TEXT_PROTOCOLHeinrich Schuchardt
Provide comments for efi_convert_device_node_to_text() and efi_convert_device_path_to_text(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: helper function to add EFI object to listHeinrich Schuchardt
To avoid duplicate coding provide a helper function that initializes an EFI object and adds it to the EFI object list. efi_exit() is the only place where we dereference a handle to obtain a protocol interface. Add a comment to the function. Suggested-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: pass handle of loaded imageHeinrich Schuchardt
The handle of a loaded image is the value of the handle member of the loaded image info object and not the address of the loaded image info. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-12-01efi_loader: output load options in helloworldHeinrich Schuchardt
We need to test if we pass a valid image handle when loading and EFI application. This cannot be done in efi_selftest as it is not loaded as an image. So let's enhance helloworld a bit. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2025-02-02 12:14:50 +0000