| Age | Commit message (Collapse) | Author |
|---|
|
Having an EFI_RNG_PROTOCOL without a backing RNG device leads to failure
to boot Linux 5.8.
Only install the EFI_RNG_PROTOCOL if we have a RNG device.
Reported-by: Scott K Logan <logans@cottsay.net>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Refine text for overlap_only_ram description to
match to what exactly flag does and aling description
with other functions.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
On RISC-V the global data pointer is stored in register gp. When a UEFI
binary calls the EFI API we have to restore it.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
efi_var_mem_notify_exit_boot_services() is invoked when ExitBootServices()
is called by the UEFI payload.
efi_var_mem_notify_exit_boot_services() should not be defined as
__efi_runtime as it is invoking EFI_ENTRY() and EFI_EXIT() which themselves
are not __efi_runtime.
Fixes: f1f990a8c958 ("efi_loader: memory buffer for variables")
Fixes: e01aed47d6a0 ("efi_loader: Enable run-time variable support for tee based variables")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The image size is checked in efi_load_pe(). Avoid checking it twice.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Currently if the bootefi command fails due to missing authentication, the
user gets no feedback.
Write a log message 'Image not authenticated' if LoadImage() fails due to
missing authentication.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Use log_err() for error messages.
Replace debug() by EFI_PRINT().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Bootxxxx variables are provided by the user and therefore cannot be
trusted. We have to validate them before usage.
A device path provided by a Bootxxxx variable must have an end node within
the indicated device path length.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We need to check that device paths provided via UEFI variables are not
malformed.
Provide function efi_dp_check_length() to check if a device path has an
end node within a given number of bytes.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
If ResetSystem() is not implemented at runtime, it should return instead
of hanging in an endless loop. This allows the operating system to reset
the system by other means as Linux does. It also matches what EDK II
suggests in comments for functions ResetShutdown() and ResetWarm() in
OvmfPkg/Library/ResetSystemLib/ResetSystemLib.c.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Under the current implementation, all the signatures, if any, in
a signed image must be verified before loading it.
Meanwhile, UEFI specification v2.8b section 32.5.3.3 says,
Multiple signatures are allowed to exist in the binary’s certificate
table (as per PE/COFF Section “Attribute Certificate Table”). Only
one hash or signature is required to be present in db in order to pass
validation, so long as neither the SHA-256 hash of the binary nor any
present signature is reflected in dbx.
This patch makes the semantics of signature verification compliant with
the specification mentioned above.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Under the new file-based variable implementation, the secure state
is always and falsely set to 0 (hence, the secure boot gets disabled)
after the reboot even if PK (and other signature database) has already
been enrolled in the previous boot.
This is because the secure state is set up *before* loading non-volatile
variables' values from saved data.
This patch fixes the order of variable initialization and secure state
initialization.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Fixes: 5f7dcf079de8 ("efi_loader: UEFI variable persistence")
|
|
In this commit, efi_signature_verify(with_sigdb) will be re-implemented
using pcks7_verify_one() in order to support certificates chain, where
the signer's certificate will be signed by an intermediate CA (certificate
authority) and the latter's certificate will also be signed by another CA
and so on.
What we need to do here is to search for certificates in a signature,
build up a chain of certificates and verify one by one. pkcs7_verify_one()
handles most of these steps except the last one.
pkcs7_verify_one() returns, if succeeded, the last certificate to verify,
which can be either a self-signed one or one that should be signed by one
of certificates in "db". Re-worked efi_signature_verify() will take care
of this step.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
|
|
This is a bug fix; Setting an authenticated variable may fail due to
a memory corruption in the authentication.
A temporary buffer will, if needed, be allocated to parse a variable's
authentication data, and some portion of buffer, specifically signer's
certificates, will be referenced by efi_signature_verify().
So the buffer should be kept valid until the authentication process
is finished.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Up to now we used the value of the bootargs environment variable as load
options in the boot manager. This is not correct. The data has to be taken
from the Boot#### variable.
Let the boot manager copy the optional data of the EFI_LOAD_OPTION as load
options to the loaded image protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The bootefi bootmgr command has to set the load options for a loaded image
from the value of BootXXXX variable. If the boot manager is not used, the
value is set from the environment variable bootargs (or efi_selftest).
Factor out a common function efi_set_load_options().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Some amount of code was moved/derived from efi_variable.c regarding
UEFI secure boot, in particluar in the commit 012c56ac76e1 ("efi_loader:
restructure code for TEE variables").
So add the orignal author's copyright notice.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The Kconfig symbol CONFIG_STACK_SIZE is used both by ARM and Microblaze
with the same meaning. Move it to menu 'General setup' so that we can use
it for all architectures.
Use the value of CONFIG_STACK_SIZE instead of a hard coded 16 MiB value for
reserving memory in the UEFI sub-system.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We recently added functions for storing/restoring variables
from a file to a memory backed buffer marked as __efi_runtime_data
commit f1f990a8c958 ("efi_loader: memory buffer for variables")
commit 5f7dcf079de8 ("efi_loader: UEFI variable persistence")
Using the same idea we now can support GetVariable() and GetNextVariable()
on the OP-TEE based variables as well.
So let's re-arrange the code a bit and move the commmon code for
accessing variables out of efi_variable.c. Create common functions for
reading variables from memory that both implementations can use on
run-time. Then just use those functions in the run-time variants of the
OP-TEE based EFI variable implementation and initialize the memory
buffer on ExitBootServices()
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The current code does not trim the output buffer correctly.
In fact it doesn't trim the buffer at all, since it calculates a wrong
value for it, which isn't even applied.
So let's remove the unused temporary size variable and trim the buffer
correctly.
Since we are editing efi_get_next_variable_name_int(), fix an indentation
error along the way.
Fixes: f042e47e8fb43 ("efi_loader: Implement EFI variable handling via OP-TEE")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove superfluous conversion to (u8 *) for memcpy argument.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Use logging instead of printf() for messages occurring when scanning block
devices during the initialization of the UEFI sub-system.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Provide function descriptions for efi_save_gd() and efi_restore_gd().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
When reading a directory, EFI_BUFFER_TOO_SMALL should be returned when
the supplied buffer is too small, so a use-case is to call
efi_file_read with *buffer_size=0 and buffer=NULL to obtain the needed
size before doing the actual read.
So move the buffer!=NULL check to after the buffer size has been checked.
This fix allows the Redhat shim fallback to run and e.g. Fedora 32 now
boots out of the box.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Currently we only check for the return value of tee_invoke_func().
Although OP-TEE and StMM will correctly set param[1].u.value.a and we'll
eventually return an error, the correct thing to do is check for the
OP_TEE return code as well.
So let's check for that and move tee_shm_free() and tee_close_session()
before exiting with an error to make sure we always clear the registered
memory.
Fixes: f042e47e8fb43 ("efi_loader: Implement EFI variable handling via OP-TEE")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use EFI_DEVICE_ERROR for TEE communication problems.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Instead of adding the definition for the specific MM SVC used in
StandAloneMM we added the one used in the standard SMC calls.
So change the value from -4 to -5 to match the correct one defined in
EDK2 and rename them to avoid future confusion
Fixes 23a397d2e2fb: ("efi_loader: Add headers for EDK2 StandAloneMM communication")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
efi_var_mem_del() is in __efi_runtime because it would be needed for a
runtime implementation of SetVariable(). memmove() is not in __efi_runtime.
So we should not use it in efi_var_mem_del().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Variable efi_current_var is a pointer to a physical memory address that
becomes invalid after SetVirtualAddressMap(). Instead of converting it via
ConvertPointer() simply set it to NULL.
Fixes: b02a707152dc ("efi_loader: enable UEFI variables at runtime")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Include a file with the initial values for non-volatile UEFI variables
into the U-Boot binary. If this variable is set, changes to variable PK
will not be allowed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
To determine if a varible is on the of the authentication variables
PK, KEK, db, dbx we have to check both the name and the GUID.
Provide a function converting the variable-name/guid pair to an enum and
use it consistently.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The file based and the OP-TEE based UEFI variable store are mutually
exclusive. Define them as choice options in Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Update the UEFI secure state when variable 'PK' is updated in the TEE
variables implementation.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
When using secure boot functions needed both for file and TEE based UEFI
variables have to be moved to the common code module efi_var_common.c.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
A previous commit adds support for displaying variables RO flag.
Let's add it on the TEE backed variable storage as well.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Enable UEFI variables at runtime.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Saving UEFI variable as encoded U-Boot environment variables does not allow
implement run-time support.
Use a memory buffer for storing UEFI variables.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Saving UEFI variable as encoded U-Boot environment variables does not allow
support at runtime.
Provide functions to manage a memory buffer with UEFI variables.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Provide a memcpy() function that we can use at UEFI runtime.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
If the EFI_OPTIONAL_PTR is set in DebugDisposition, a NULL pointer does not
constitute an invalid parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We need ConvertPointer() to adjust pointers when implementing runtime
services within U-Boot.
After ExitBootServices() gd is not available anymore. So we should not use
EFI_ENTRY() and EFI_EXIT().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Persist non-volatile UEFI variables in a file on the EFI system partition.
The file is written whenever a non-volatile UEFI variable is changed after
initialization of the UEFI sub-system.
The file is read during the UEFI sub-system initialization to restore
non-volatile UEFI variables.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
In audit mode the UEFI variable SecureBoot is set to zero but the
efi_secure_boot flag is set to true.
The efi_secure_boot flag should match the UEFIvariable SecureBoot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Set the read only property of the UEFI variables AuditMode and DeployedMode
conforming to the UEFI specification.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
According to the UEFI specification the variable VendorKeys is 1 if the
"system is configured to use only vendor-provided keys".
As we do not supply any vendor keys yet the variable VendorKeys must be
zero.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Do not change the value of parameter attributes in function
efi_set_variable_int(). This allows to use it later.
Do not use variable attr for different purposes but declare separate
variables (attr and old_attr).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Simplify the implementation of the UEFI boot manager:
* avoid EFI_CALL for SetVariable() and GetVariable()
* remove unnecessary type conversions
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
UEFI variables OsIndicationsSupported, PlatformLangCodes should be read
only.
Avoid EFI_CALL() for SetVariable().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Separate the remaining UEFI variable API functions GetNextVariableName and
QueryVariableInfo() from internal functions implementing them.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
We currently have two implementations of UEFI variables:
* variables provided via an OP-TEE module
* variables stored in the U-Boot environment
Read only variables are up to now only implemented in the U-Boot
environment implementation.
Provide a common interface for both implementations that allows handling
read-only variables.
As variable access is limited to very few source files put variable
related definitions into new include efi_variable.h instead of efi_loader.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Avoid a possible NULL pointer dereference in efi_convert_pointer().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Don't call calloc(0, ..).
Consider return value of efi_get_child_controllers().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
