summaryrefslogtreecommitdiff
path: root/lib/efi_loader
AgeCommit message (Collapse)Author
2019-09-09efi_loader: EFI_FILE_PROTOCOL rev 2 stubHeinrich Schuchardt
The UEFI specification requires to implement version 2 of the EFI_FILE_PROTOCOL. Provide the missing functions as stubs. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: file size checksHeinrich Schuchardt
The file size has to be determined in multiple places. Factor out a common function. If on entry into EFI_FILE_PROTOCOL.Read() the current position is beyond the end of the file, return EFI_DEVICE_ERROR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: correct reading of directoriesHeinrich Schuchardt
EFI_FILE_PROTOCOL.Read() is used both to read files and directories. When reaching the end of a directory we always have to return buffer size zero irrespective of the incoming buffer size. (The described scenario for a Shim quirk cannot arise because every directory has at least '.' and '..' as entries.) Even when the buffer_size is too small multiple times we have to keep a reference to our last read directory entry. When we return to the start of the directory via SetPosition() we must remove the reference to a previously kept directory entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: eliminate inline function ascii2unicode()Heinrich Schuchardt
ascii2unicode() can only convert characters 0x00-0x7f from UTF-8 to UTF-16. Use utf8_utf16_strcpy() instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-09efi_loader: EFI_FILE_PROTOCOL.Write() check argsHeinrich Schuchardt
Check the parameters passed to Write(): * cannot write to directories (UEFI SCT 2017, 5.7.3.5.15) * cannot write to file opened read only (UEFI SCT 2017, 5.7.3.5.16) Add missing comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05doc: UEFI API documentationHeinrich Schuchardt
Add some more files to the UEFI API documentation. Correct some Sphinx comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: EFI_BLOCK_IO_PROTOCOL.Reset()Heinrich Schuchardt
We cannot do anything in EFI_BLOCK_IO_PROTOCOL.Reset() but this does not justify to return an error. Let EFI_BLOCK_IO_PROTOCOL.Reset() return EFI_SUCCESS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: use EFI_PRINT() instead of debug()Heinrich Schuchardt
EFI_PRINT() offers indention of debug messages. Adjust the debug messages of the BLOCK_IO_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: parameter checks BLOCK_IO_PROTOCOLHeinrich Schuchardt
Check parameters of ReadBlocks() and WriteBlocks(). If the buffer size is not a multiple of the block size, we have to return EFI_BAD_BUFFER_SIZE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: do not set invalid screen modeHeinrich Schuchardt
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.SetMode() should return EFI_UNDEFINED if a screen mode is not available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-09-05efi_loader: cursor positioningHeinrich Schuchardt
When backspacing in column 0 do no set the column index to ULONG_MAX. Ensure that the row number is not set to ULONG_MAX even if the row count is advertised as 0. Ignore control characters other the 0x08, 0x0a, 0x0d when updating the column. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render UsbClass DP nodes as textHeinrich Schuchardt
Correct the text representation of UsbClass device path nodes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render CD-ROM device path nodesHeinrich Schuchardt
Correct the name of the partition size component in struct efi_device_path_cdrom_path. Render entry, start, and size when converting a CD-ROM device path node to text. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correctly render MAC address device path nodesHeinrich Schuchardt
If the interface type is greater 1 render all 32 bytes of the MAC address. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: correct text conversion for vendor DPHeinrich Schuchardt
Vendor device paths may contain data. When converting vendor device paths to text this binary data has to be rendered. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: Extract adding a conventional memory in separate routinePark, Aiden
Adding a conventional memory region to the memory map may require ram_top limitation and it can be also commonly used. Extract adding a conventional memory to the memory map in a separate routine for generic use. Signed-off-by: Aiden Park <aiden.park@intel.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: implement MCastIPtoMACHeinrich Schuchardt
Implement the MCastIPtoMAC service of the simple network protocol. It converts an multicast IPv4 (or IPv6) address to a multicast Ethernet address. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: fix status management in network stackHeinrich Schuchardt
The network should start in status EfiSimpleNetworkStopped. Add and correct status checks in the simple network protocol. Correct the unit test: * Shutdown() and Stop() during setup if needed * invoke Shutdown() before Stop() when tearing down Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: EFI_SIMPLE_NETWORK.Transmit() fill headerHeinrich Schuchardt
Fill the media header in EFI_SIMPLE_NETWORK.Transmit(). Check that the buffer size is large enough for the header. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: interrupts in simple network protocolHeinrich Schuchardt
GetStatus() must clear the interrupt status. Transmit() should set the TX interrupt. Receive() should clear the RX interrupt. Initialize() and Start() should clear the interrupt status. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: do not call efi_runtime_detach twiceHeinrich Schuchardt
Commit 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") added a call to efi_runtime_detach() to ExitBootServices() but did not remove the call in SetVirtualAddressMap(). Remove the superfluous function call. Correct a comment referring to efi_runtime_detach(). Fixes: 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: parameter check in SetVirtualAddressMapHeinrich Schuchardt
Check the parameters DescriptorSize and DescriptiorVersion of SetVirtualAddressMap() as prescribed by the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: EFI_PXE_BASE_CODE_PROTOCOL stubHeinrich Schuchardt
U-Boot implements the EFI_PXE_BASE_CODE_PROTOCOL because GRUB uses the mode information for booting via PXE. All function pointers in the protocol were NULL up to now which will cause immediate crashes when the services of the protocol are called. Create function stubs for all services of the protocol returning EFI_UNSUPPORTED. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get() to env.hSimon Glass
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-30efi_loader: implement ConvertPointer()Heinrich Schuchardt
Implement the ConvertPointer() runtime service. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: definition of efi_virtual_address_map()Heinrich Schuchardt
Use efi_uintn_t where the UEFI spec uses UINTN. Use efi_uintn_t also for the result of the division of two efi_uintn_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: re-enable GRUB workaround on 32bit ARMHeinrich Schuchardt
GRUB on ARM 32bit prior to version 2.04 lacks proper handling of caches. In U-Boot v2019.04 a workaround for this was inadvertently removed. The workaround is currently also needed for booting on systems with caches that cannot be managed via CP15 (e.g. with an i.MX6 CPU). Re-enable the workaround and make it customizable. Fixes: f69d63fae281 ("efi_loader: use efi_start_image() for bootefi") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: unaligned access in efi_file_from_path()Heinrich Schuchardt
The device path structure is packed. So no assumption on the alignment is possible. Copy the file name in efi_file_from_path() to assure there is no unaligned access. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: efi_dp_from_file() expect UTF-8 pathHeinrich Schuchardt
Properly convert UTF-8 file names to UTF-16. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: function comments efi_bootmgr.cHeinrich Schuchardt
Convert function descriptions to Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comment for struct efi_pool_allocationHeinrich Schuchardt
Change comment for struct efi_pool_allocation to match Sphinx style. Describe all structure fields. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comments for variable servicesHeinrich Schuchardt
Add missing parameter descriptions. Remove an invalid link. Correct the formatting of a function comment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix comments for efi_update_exit_data()Heinrich Schuchardt
Add missing colons after parameter descriptions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: fix function comments in efi_boottime.cHeinrich Schuchardt
scripts/kernel-doc pointed out some errors in the function comments in efi_boottime.c. Add missing and remove superfluous parameter descriptions. Escape * in a function description. Add empty lines for readability. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: Change return type of efi_add_memory_map()Bryan O'Donoghue
We currently have some inconsistent use of efi_add_memory_map() throughout the code. In particular the return value of efi_add_memory_map() is not interpreted the same way by various users in the codebase. This patch does the following: - Changes efi_add_memory_map() to return efi_status_t. - Adds a method description to efi_add_memory_map(). - Changes efi_add_memory_map() to return EFI_SUCCESS - Returns non-zero for error in efi_add_memory_map() - Updates efi_allocate_pages() to new efi_add_memory_map() - Updates efi_free_pages() to new efi_add_memory_map() - Updates efi_carve_out_dt_rsv() to new efi_add_memory_map() - Updates efi_add_runtime_mmio() to new efi_add_memory_map() Fixes: 5d00995c361c ("efi_loader: Implement memory allocation and map") Fixes: 74c16acce30b ("efi_loader: Don't allocate from memory holes") Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Graf <agraf@csgraf.de> Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. This requires allocating the event and the event list from runtime data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_loader: efi_set_virtual_address_map_runtime()Heinrich Schuchardt
efi_set_virtual_address_map_runtime() must be of type __efi_runtime. Fixes: ee8ebaaaaedc ("efi_loader: split off detaching SetVirtualAddress()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: detach runtime in ExitBootServices()Heinrich Schuchardt
Linux can be called with a command line parameter efi=novamap, cf. commit 4e46c2a95621 ("efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted"). In this case SetVirtualAddressMap() is not called after ExitBootServices(). OpenBSD 32bit does not call SetVirtualAddressMap() either. Runtime services must be set to an implementation supported at runtime in ExitBootServices(). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: simplify detachingHeinrich Schuchardt
We do not need any array typed detach list. Let's simply update the pointers directly. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: decision on EFI_RT_SUPPORTED_RESET_SYSTEMHeinrich Schuchardt
Move the logic determining which board supports reset at runtime to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: split off detaching SetVirtualAddress()Heinrich Schuchardt
The runtime services SetVirtualAddress() and ConvertPointer() become unavailable after SetVirtualAddress(). Other runtime services become unavailable after ExitBootServices. Move the update of SetVirtualAddress() and ConvertPointer() to efi_relocate_runtime_table(). Use functions with the correct signature when detaching. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: unimplemented runtime servicesHeinrich Schuchardt
Unimplemented runtime services should always return EFI_UNSUPPORTED as described in the UEFI 2.8 spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: let the variable driver patch out the runtimeHeinrich Schuchardt
Our variable services are only provided at boottime. Therefore when leaving boottime the variable function are replaced by dummy functions returning EFI_UNSUPPORTED. Move this patching of the runtime table to the variable services implementation. Executed it in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: clean up runtime detachingHeinrich Schuchardt
The detaching of the runtime will have to move to ExitBootServices() to encompass operating system that do not call SetVirtualAddressMap(). This patch changes the logic for the relocation of the pointers in the runtime table such that the relocation becomes independent of the entries in the detach list. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove NULL entries from runtime detach listHeinrich Schuchardt
Some entries in the system table are set to NULL in ExitBootServices(). We had them in the runtime detach list to avoid relocation of NULL. Let's instead assign the pointers dynamically in efi_initialize_system_table() to avoid the relocation entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: initialization of variable servicesHeinrich Schuchardt
Provide an initialization routine for variable services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: move efi_query_variable_info()Heinrich Schuchardt
Let's keep similar things together. Move efi_query_variable_info() to lib/efi_loader/efi_variable.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-14 00:19:42 +0000