summaryrefslogtreecommitdiff
path: root/lib/efi_selftest
AgeCommit message (Collapse)Author
2020-08-01efi_selftest: block device test requires CONFIG_DOS_PARTITIONHeinrich Schuchardt
Do not execute the block device test if CONFIG_DOS_PARTITION=n. Imply CONFIG_DOS_PARTITION in Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-01efi_selftest: SNP test depends on networkHeinrich Schuchardt
If CONFIG_NET=n, testing the simple network protocol makes no sense. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_selftest: adjust runtime test for variablesHeinrich Schuchardt
As variable services are available at runtime we have to expect EFI_SUCCESS when calling the services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-07efi_loader: put device tree into EfiACPIReclaimMemoryHeinrich Schuchardt
According to the UEFI spec ACPI tables should be placed in EfiACPIReclaimMemory. Let's do the same with the device tree. Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Grant Likely <grant.likely@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: test CalculateCrc32, CopyMem, SetMemHeinrich Schuchardt
Provide unit tests for CalculateCrc32(), CopyMem(), SetMem(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-22efi_selftest: check length reported by GetNextVariableName()Heinrich Schuchardt
GetNextVariableName should report the length of the variable including the final 0x0000 in bytes. Check this in the unit test. Increase the buffer size for variable names. 40 bytes is too short. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28efi_selftest: add selftests for loadfile2 used to load initramfsIlias Apalodimas
Provide a unit test loading an initial ramdisk using the EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request. An example usage - given a file image with a file system in partition 1 holding file initrd - is: * Configure the sandbox with CONFIG_EFI_SELFTEST=y CONFIG_EFI_LOAD_FILE2_INITRD=y CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd" * Run ./u-boot and execute host bind 0 image setenv efi_selftest load initrd bootefi selftest This would provide a test output like: Testing EFI API implementation Selected test: 'load initrd' Setting up 'load initrd' Setting up 'load initrd' succeeded Executing 'load initrd' Loaded 12378613 bytes CRC32 2997478465 Executing 'load initrd' succeeded Now the size and CRC32 can be compared to the provided file. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_driver: fix efi_uc_stop()Heinrich Schuchardt
Use the correct protocol in efi_uc_stop() when detaching the driver from the controller. Change the block IO unit test for the block device driver to throw an error instead of a todo if teardown fails. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-15efi_selftest: enable CONFIG_CMD_POWEROFFHeinrich Schuchardt
For automating testing we should be able to power off the test system. The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff() function which is only available if CONFIG_CMD_POWEROFF=y. Enable CONFIG_CMD_POWEROFF if PSCI reset is available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_selftest: unit test for EFI_RNG_PROTOCOLHeinrich Schuchardt
Provide a unit test for the EFI_RNG_PROTOCOL. The list of algorithms is read. Two random numbers are generated. The test checks that the two numbers differ. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_selftest: Update .gitignoreSughosh Ganu
Add the following file to .gitignore efi_miniapp_file_image_exception.h Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Use efi_miniapp_*.h instead of file enumeration. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-12efi_selftest: enable all UEFI unit tests on the sandboxHeinrich Schuchardt
As we can build relocation code for the sandbox now we should enable the unit tests that had to be disabled up to now. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06efi_selftest: testing read-only variablesHeinrich Schuchardt
The UEFI spec has this sentence: "Variables that have runtime access but that are not nonvolatile are read-only data variables once ExitBootServices() is performed." At least EDK2 therefore treats variable PlatformLangCodes only as read-only at runtime. Nowhere do we make this variable read-only in U-Boot. Do not use variable PlatformLangCodes for testing if the read only attribute of variables is observed before ExitBootServices(). Fixes: 5a24239c951e ("efi_loader: selftest: enable APPEND_WRITE tests") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06efi_selftest: correct SetVariable() testHeinrich Schuchardt
Errors should not only be announced as text but should also result in EFI_ST_FAILURE being returned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20efi_loader: selftest: enable APPEND_WRITE testsAKASHI Takahiro
Now that APPEND_WRITE is supported, the result check for the only existing test case should be changed to 'todo' to 'error', while two more test cases are added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: fix status management in network stackHeinrich Schuchardt
The network should start in status EfiSimpleNetworkStopped. Add and correct status checks in the simple network protocol. Correct the unit test: * Shutdown() and Stop() during setup if needed * invoke Shutdown() before Stop() when tearing down Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_selftest: check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPTHeinrich Schuchardt
Check that when the WaitForPacket event occurs EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT is set. Check the return value of Receive(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-29efi_selftest: use standalone UEFI program for exceptionHeinrich Schuchardt
To fully demonstrate crash outputs for UEFI images provide a standalone UEFI application that tries to invoke an illegal opcode. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-29efi_selftest: enable Exit() unit test on x86_64Heinrich Schuchardt
Enable unit tests for StartImage() and Exit() unit tests on x86_64. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_selftest: sharpen ConvertPointer() testHeinrich Schuchardt
Now that ConvertPointer() is implemented throw an error if the result is incorrect. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_selftest: fix SetVirtualAddressMap unit testHeinrich Schuchardt
We read the address map before assigning the memory for the pages that will be mapped to virtual addresses. So these pages will overlap with the entry for EFI_CONVENTIONAL_MEMORY. We have to ensure that every page is described at most once in the map. Remove EFI_CONVENTIONAL_MEMORY from the map that we pass to SetVirtualAddressMap(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Provide a unit test for SetVirtualAddressMap() and ConvertPointer(). As ConvertPointer() is not implemented yet this will spit out some warnings. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: do not call CloseEvent() after ExitBootServices()Heinrich Schuchardt
Boot services are not available after calling ExitBootServices(). So we should not try to close an event here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-06efi_selftest: test variable services at runtimeHeinrich Schuchardt
Provide a unit test for the variable services at runtime. Currently we expect EFI_UNSUPPORTED to be returned as the runtime implementation is still missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: description of CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
The current short description has a typo. Let it stand out clear that we provide unit tests. Improve the description of the CMD_BOOTEFI_SELFTEST configuration option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-06-20efi_loader: QueryMode() must allocate bufferHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the mode information structure. Adjust the unit test to free the buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_selftest: correct event group testHeinrich Schuchardt
If any member of the event group is signaled, all members must be set to signaled and their notification functions have to be queued. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01efi_selftest: unit test for OpenProtocolInformation()Heinrich Schuchardt
Provide a unit test that checks that the open protocol information is correctly updated when opening and closing protocols. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01efi_loader: Kconfig entries for GetTime(), SetTime()Heinrich Schuchardt
The GetTime() and the SetTime() runtime services are not obligatory. So let's make them customizable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31efi_loader: correct notification of protocol installationHeinrich Schuchardt
When a protocol is installed the handle should be queued for the registration key of each registered event. LocateHandle() should return the first handle from the queue for the registration key and delete it from the queue. Implement the queueing. Correct the selftest. With the patch the UEFI SCT tests for LocateHandle() are passed without failure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi: selftest: APPEND_WRITE is not supportedAKASHI Takahiro
The error here should be marked *todo*. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi_loader: implement SetTimeHeinrich Schuchardt
Implement the SetTime() runtime service. Extend the real time clock selftest to check setting the clock. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: rename Unicode collation protocol 2 variablesHeinrich Schuchardt
Rename variables to make it clear they refer to the Unicode collation protocol identified by the EFI_UNICODE_PROTOCOL2_GUID. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: make device path to text protocol customizableHeinrich Schuchardt
The device path to text protocol is not needed for EBBR compliance. So let's make it a customizable option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: make Unicode collation protocol customizableHeinrich Schuchardt
The Unicode collation protocol is not needed for EBBR compliance. So let's make it a customizable option. The Unicode capitalization table is only needed by this protocol. So let it depend on the Unicode collation protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: unit test for RegisterProtocolNotify()Heinrich Schuchardt
Provide a unit test for the RegisterProtocolNotify() boot service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: remove redundant function efi_st_memcmp()Heinrich Schuchardt
Function memcmp() is available in efi_freestanding.c. So we do not remove a further implementation. Replace all usages of efi_st_memcmp() by memcmp(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_selftest: test exit_dataHeinrich Schuchardt
Amend the unit test 'start image exit' to transfer a string as exit data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: need either ACPI table or device treeHeinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. Let us enforce this condition in the `bootefi` command. If the bootefi command is called without a device tree parameter use a previously device tree or fall back to the internal device tree. The fdt unit test should not be run on boards with an ACPI table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_selftest: do not run FDT test with ACPI table.Heinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. So do not run the device tree unit test on boards with an ACPI table. Hence there is no need any longer to make it 'on request' only. Do not pass $fdtcontroladdr to `bootefi selftest`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: consistent naming of protocol GUIDsHeinrich Schuchardt
We should consistently use the same name for protocol GUIDs as defined in the UEFI specification. Not adhering to this rule has led to duplicate definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID. Adjust misnamed protocol GUIDs. Adjust the text for the graphics output protocol in the output of the `efidebug dh` command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12efi_selftest: expect boot services data for fdtHeinrich Schuchardt
In a previous patch the memory type used for the FDT has been changed to boot services data. We have to adjust the test. Correct an incorrect comment. The tested services are boot services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12efi_selftest: physical and virtual addresses must matchHeinrich Schuchardt
At boottime physical and virtual addresses must match. Add a corresponding check to the memory unit test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_selftest: check image_base, image_sizeHeinrich Schuchardt
In efi_selftest_start_image_exit.c test the image_base and image_size are correctly set in the loaded image protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27efi_selftest: avoid double free in dp utilities testHeinrich Schuchardt
Avoid duplicate FreePool() in unit test for the device patch utilities protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_selftest: fix test_hii_string_get_string()Heinrich Schuchardt
The check testing the string result of get_string() returned the wrong result. The result was ignored. Use efi_st_strcmp_16_8() for the string comparison. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-14efi_loader: fix build error for freestanding.oHeinrich Schuchardt
Since commit f51a226436a87 ("efi_loader: provide freestanding library") in parallel builds errors lib/efi_selftest/../efi_loader/efi_freestanding.o: file not recognized: File truncated occur. Obviously make cannot correctly sequence parallel builds with a dependency like ../efi_loader/efi_freestanding.o. Fixes: f51a226436a87 ("efi_loader: provide freestanding library") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-16efi_selftest: LoadImage from file device pathHeinrich Schuchardt
Provide a unit test that calls LoadImage() with a file device path and executes the application via StartImage(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2024-12-23 10:58:22 +0000