summaryrefslogtreecommitdiff
path: root/lib/efi_selftest
AgeCommit message (Collapse)Author
2019-09-20efi_loader: selftest: enable APPEND_WRITE testsAKASHI Takahiro
Now that APPEND_WRITE is supported, the result check for the only existing test case should be changed to 'todo' to 'error', while two more test cases are added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_loader: fix status management in network stackHeinrich Schuchardt
The network should start in status EfiSimpleNetworkStopped. Add and correct status checks in the simple network protocol. Correct the unit test: * Shutdown() and Stop() during setup if needed * invoke Shutdown() before Stop() when tearing down Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05efi_selftest: check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPTHeinrich Schuchardt
Check that when the WaitForPacket event occurs EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT is set. Check the return value of Receive(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-29efi_selftest: use standalone UEFI program for exceptionHeinrich Schuchardt
To fully demonstrate crash outputs for UEFI images provide a standalone UEFI application that tries to invoke an illegal opcode. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-29efi_selftest: enable Exit() unit test on x86_64Heinrich Schuchardt
Enable unit tests for StartImage() and Exit() unit tests on x86_64. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_selftest: sharpen ConvertPointer() testHeinrich Schuchardt
Now that ConvertPointer() is implemented throw an error if the result is incorrect. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_selftest: fix SetVirtualAddressMap unit testHeinrich Schuchardt
We read the address map before assigning the memory for the pages that will be mapped to virtual addresses. So these pages will overlap with the entry for EFI_CONVENTIONAL_MEMORY. We have to ensure that every page is described at most once in the map. Remove EFI_CONVENTIONAL_MEMORY from the map that we pass to SetVirtualAddressMap(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGEHeinrich Schuchardt
Provide a unit test for SetVirtualAddressMap() and ConvertPointer(). As ConvertPointer() is not implemented yet this will spit out some warnings. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16efi_selftest: do not call CloseEvent() after ExitBootServices()Heinrich Schuchardt
Boot services are not available after calling ExitBootServices(). So we should not try to close an event here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-06efi_selftest: test variable services at runtimeHeinrich Schuchardt
Provide a unit test for the variable services at runtime. Currently we expect EFI_UNSUPPORTED to be returned as the runtime implementation is still missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: description of CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
The current short description has a typo. Let it stand out clear that we provide unit tests. Improve the description of the CMD_BOOTEFI_SELFTEST configuration option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-06-20efi_loader: QueryMode() must allocate bufferHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the mode information structure. Adjust the unit test to free the buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_selftest: correct event group testHeinrich Schuchardt
If any member of the event group is signaled, all members must be set to signaled and their notification functions have to be queued. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01efi_selftest: unit test for OpenProtocolInformation()Heinrich Schuchardt
Provide a unit test that checks that the open protocol information is correctly updated when opening and closing protocols. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-01efi_loader: Kconfig entries for GetTime(), SetTime()Heinrich Schuchardt
The GetTime() and the SetTime() runtime services are not obligatory. So let's make them customizable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-31efi_loader: correct notification of protocol installationHeinrich Schuchardt
When a protocol is installed the handle should be queued for the registration key of each registered event. LocateHandle() should return the first handle from the queue for the registration key and delete it from the queue. Implement the queueing. Correct the selftest. With the patch the UEFI SCT tests for LocateHandle() are passed without failure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi: selftest: APPEND_WRITE is not supportedAKASHI Takahiro
The error here should be marked *todo*. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-24efi_loader: implement SetTimeHeinrich Schuchardt
Implement the SetTime() runtime service. Extend the real time clock selftest to check setting the clock. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: rename Unicode collation protocol 2 variablesHeinrich Schuchardt
Rename variables to make it clear they refer to the Unicode collation protocol identified by the EFI_UNICODE_PROTOCOL2_GUID. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: make device path to text protocol customizableHeinrich Schuchardt
The device path to text protocol is not needed for EBBR compliance. So let's make it a customizable option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12efi_loader: make Unicode collation protocol customizableHeinrich Schuchardt
The Unicode collation protocol is not needed for EBBR compliance. So let's make it a customizable option. The Unicode capitalization table is only needed by this protocol. So let it depend on the Unicode collation protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: unit test for RegisterProtocolNotify()Heinrich Schuchardt
Provide a unit test for the RegisterProtocolNotify() boot service. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-07efi_selftest: remove redundant function efi_st_memcmp()Heinrich Schuchardt
Function memcmp() is available in efi_freestanding.c. So we do not remove a further implementation. Replace all usages of efi_st_memcmp() by memcmp(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-02efi_selftest: test exit_dataHeinrich Schuchardt
Amend the unit test 'start image exit' to transfer a string as exit data. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: need either ACPI table or device treeHeinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. Let us enforce this condition in the `bootefi` command. If the bootefi command is called without a device tree parameter use a previously device tree or fall back to the internal device tree. The fdt unit test should not be run on boards with an ACPI table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_selftest: do not run FDT test with ACPI table.Heinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. So do not run the device tree unit test on boards with an ACPI table. Hence there is no need any longer to make it 'on request' only. Do not pass $fdtcontroladdr to `bootefi selftest`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23efi_loader: consistent naming of protocol GUIDsHeinrich Schuchardt
We should consistently use the same name for protocol GUIDs as defined in the UEFI specification. Not adhering to this rule has led to duplicate definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID. Adjust misnamed protocol GUIDs. Adjust the text for the graphics output protocol in the output of the `efidebug dh` command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12efi_selftest: expect boot services data for fdtHeinrich Schuchardt
In a previous patch the memory type used for the FDT has been changed to boot services data. We have to adjust the test. Correct an incorrect comment. The tested services are boot services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12efi_selftest: physical and virtual addresses must matchHeinrich Schuchardt
At boottime physical and virtual addresses must match. Add a corresponding check to the memory unit test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_selftest: check image_base, image_sizeHeinrich Schuchardt
In efi_selftest_start_image_exit.c test the image_base and image_size are correctly set in the loaded image protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27efi_selftest: avoid double free in dp utilities testHeinrich Schuchardt
Avoid duplicate FreePool() in unit test for the device patch utilities protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-20efi_selftest: fix test_hii_string_get_string()Heinrich Schuchardt
The check testing the string result of get_string() returned the wrong result. The result was ignored. Use efi_st_strcmp_16_8() for the string comparison. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-14efi_loader: fix build error for freestanding.oHeinrich Schuchardt
Since commit f51a226436a87 ("efi_loader: provide freestanding library") in parallel builds errors lib/efi_selftest/../efi_loader/efi_freestanding.o: file not recognized: File truncated occur. Obviously make cannot correctly sequence parallel builds with a dependency like ../efi_loader/efi_freestanding.o. Fixes: f51a226436a87 ("efi_loader: provide freestanding library") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-16efi_selftest: LoadImage from file device pathHeinrich Schuchardt
Provide a unit test that calls LoadImage() with a file device path and executes the application via StartImage(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-16efi_selftest: fix memory allocation in HII testsHeinrich Schuchardt
In efi_selftest we are in EFI land. We cannot call U-Boot library functions malloc() and free() but should use the boot time services instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-16efi_selftest: do not use efi_free_pool()Heinrich Schuchardt
In efi_selftest we are in EFI land. We should not use U-Boot library functions but boot time services for memory management. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: Make HII a config optionAlexander Graf
Heinrich ran into issues with HII and iPXE which lead to #SErrors on his Odroid-C2 system. We definitely do not want to regress just yet, so let's not expose the HII protocols by default. Instead, let's make it a config option that people can play with This way, we can stabilize the code in tree without breaking any users. Once someone figures out, why this breaks iPXE (probably a NULL dereference), we can enable it by default. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de> --- v1 -> v2: - Remove HII selftest as well v2 -> v3: - Make config option
2019-02-13efi_selftest: fix HII testsHeinrich Schuchardt
efi_st_printf() does not support format code %ld. Anyway the format code for size_t would be %zu which isn't supported either. We do not want any divisions to avoid invalid references to integer arithmetic routines, cf. https://gcc.gnu.org/onlinedocs/gccint/Integer-library-routines.html. As a simple remedy remove the noisy messages from the output. They are not relevant for automated testing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: add HII database protocols testAKASHI Takahiro
This efi_selftest tests HII database protocol and HII string protocol. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: do not use symbolic linksHeinrich Schuchardt
Symbolic links are not supported on all file systems, e.g. not on FAT. So it is not wise to use them in our source tree. Use a qualified path to refer to lib/efi_loader/efi_freestanding.c in scripts/Makefile.lib instead. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Fix build with O=] Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: use freestanding library for efi appsHeinrich Schuchardt
GCC requires that freestanding programs provide memcpy(), memmove(), memset(), and memcmp(). Add the library functions when building a *.efi files. The EFI selftests might use other compilation flags. So use a symbolic link to provide lib/efi_selftest/efi_freestanding.c and compile it separately. Reported-by: Alexander Graf <agraf@suse.de> Fixes: 5be444d14b38 ("efi_loader: consistent build flags for EFI applications") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: fix variables test for GetNextVariableName()AKASHI Takahiro
There is a bug in efi variables test. Fix it with some cosmetic improvements. Please note that efi variables test still fails at QueryVariableInfo() and GetVariable(), but this is not due to a change in this patch. ==8<== Testing EFI API implementation Selected test: 'variables' Setting up 'variables' Setting up 'variables' succeeded Executing 'variables' .../u-boot/lib/efi_selftest/efi_selftest_variables.c(60): TODO: QueryVariableInfo failed .../u-boot/lib/efi_selftest/efi_selftest_variables.c(131): TODO: GetVariable returned wrong length 7 .../u-boot/lib/efi_selftest/efi_selftest_variables.c(133): TODO: GetVariable returned wrong value Executing 'variables' succeeded Boot services terminated Summary: 0 failures ==>8== Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: consistent build flags for EFI applicationsHeinrich Schuchardt
At the same time adding and removing the -Os flag does not make any sense. Actually it leads to -Os not being used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: use u16* for file nameHeinrich Schuchardt
UTF-16 strings in our code should all be u16 *. Fix an inconsistency for file names which may lead to a warning for printf("%ls", ). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: tpl unit test, check return valuesHeinrich Schuchardt
For some API calls checks for the return values are missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: events unit test, check return valuesHeinrich Schuchardt
For some API calls checks for the return values are missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: SNP unit test on sandboxHeinrich Schuchardt
Running the simple network protocol test on the sandbox requires setting the environment variable ethact to a network interface connected to a DHCP server and ethrotate to 'no'. So let's make it an on-request test on the sandbox (selectable by setting environment variable efi_selftest). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_loader: use const efi_guid_t * for variable servicesHeinrich Schuchardt
The runtime variable services never change GUIDs. So we should declare the GUID parameters as constant. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13efi_selftest: allow building on ARMv7-MHeinrich Schuchardt
ARMv7-M only supports the Thumb instruction set. Our current crt0 code does not support it. With the patch we can build all unit tests of the EFI subsystem that do not require crt0. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-23efi_selftest: block device: avoid read after freeHeinrich Schuchardt
Reading the position in a file after closing the same results in a read after free. Correct the sequence in the test. Reported-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-26 16:20:25 +0000