summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-27Kconfig: cmd: Make networking command dependent on NETMichal Simek
Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-14lib: Kconfig: Move DYNAMIC_CRC_TABLE to KconfigFaiz Abbas
Add CONFIG prefix to DYNAMIC_CRC_TABLE and implement it in Kconfig. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-10efi_loader: correct efi_disk_registerHeinrich Schuchardt
efi_disk_register should return as status code (efi_status_t). Disks with zero blocks should be reported as 'not ready' without throwing an error. This patch solves a problem running OpenBSD on system configured with CONFIG_BLK=n (e.g. i.MX6). Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: add missing runtime services stubsHeinrich Schuchardt
Add stubs for UpdateCapsule, QueryCapsuleCapabilities, and QueryVariableInfo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_driver: return type of efi_driver_init()Heinrich Schuchardt
Change the return type of efi_driver_init() to efi_status_t. efi_driver_init() calls efi_add_driver() which returns an efi_status_t value. efi_driver_init() should not subject this value to a conversion to int losing high bits on 64bit systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: do not use 2.0.5 as UEFI revision numberHeinrich Schuchardt
Currently the UEFI revision number in the system table header is set to 2.0.5. This version number does not refer to any existing version of the UEFI standard. Set the revision number to 2.7. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: create stub for CreateEventExHeinrich Schuchardt
Currently we set the function pointer for the CreateEventEx boot service to NULL. When called this would lead to an immediate failure. A function stub is provided which handles the case that the boot service is called without an event group and returns EFI_UNSUPPORTED otherwise. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_selftest: use correct compiler flags for miniappsHeinrich Schuchardt
For EFI binaries we need special CFLAGS. They were specified for an object file that since has been replaced. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10efi_loader: fix building crt0 on armHeinrich Schuchardt
Before the patch an undefined constant EFI_SUBSYSTEM was used in the crt0 code. The current version of binutils does not swallow the error. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403 The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in pe.h. So let's factor out asm-generic/pe.h for the image subsystem constants and use it in our assembler code. IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification let's use IMAGE_SUBSYSTEM_EFI_ROM instead. The include pe.h is only used in code maintained by Alex so let him be the maintainer here too. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-08Move most CONFIG_HAVE_BLOCK_DEVICE to KconfigAdam Ford
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Convert LIB_UUID to KconfigAdam Ford
config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08Convert CONFIG LIB_HW_RAND to KconfigAdam Ford
config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-29aes: Allow non-zero initialization vectorАндрей Мозжухин
AES encryption in CBC mode, in most cases, must be used with random initialization vector. Using the same key and initialization vector several times is weak and must be avoided. Added iv parameter to the aes_cbc_encrypt_blocks and aes_cbc_decrypt_blocks functions for passing initialization vector. Command 'aes' now also require the initialization vector parameter. Signed-off-by: Andrey Mozzhuhin <amozzhuhin@yandex.ru>
2018-01-28efi_loader: consistently use %pD to print device pathsHeinrich Schuchardt
Now that we have %pD support in vsprintf we should avoid separate logic for printing device paths in other places. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28efi_loader: do not install NULL as device pathHeinrich Schuchardt
In an image is loaded from memory we do not have a device path. Do not install NULL as device path in this case. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28vsprintf.c: correct printing of a NULL device pathHeinrich Schuchardt
When printing '%pD' with a value of NULL we want to output '<NULL>'. But this requires copying to buf. Leave this to string16. A unit test is supplied which relies on EFI support in the sandbox. The development for EFI support in the sandbox is currently in branch u-boot-dm/efi-working. The branch lacks commit 6ea8b580f06b ("efi_loader: correct DeviceNodeToText for media types"). Ater rebasing the aforementioned branch on U-Boot v2018.01 and adding 256060e4257a2 and this patch the test is executed successfully. Fixes: 256060e4257a2 (vsprintf.c: add EFI device path printing) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28efi_loader: Call Exit() on return from payload in StartImage()Alexander Graf
When a UEFI payload just returns instead of calling the Exit() callback, we handle that in efi_do_enter() and call Exit on its behalf, so that the loaded_image->exit_status value is correct. We were missing that logic in StartImage(). Call it there too. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28efi_loader: fix comments in indent_string()Heinrich Schuchardt
Provide a better description for indent_string. Fix a typo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28efi_loader: Always use EFIAPI instead of asmlinkageAlexander Graf
EFI calls are usually defined as asmlinkage. That means we pass all parameters to functions via the stack x86_32. On x86_64 however, we need to also stick to the MS ABI calling conventions, which the EFIAPI define conveniently handles for us. Most EFI functions were also marked with EFIAPI, except for the entry call. So this patch adjusts all entry calls to use EFIAPI instead of the manual asmlinkage attribute. While at it, we also change the prototype of the entry point to return efi_status_t instead of ulong, as this is the correct prototype definition. Signed-off-by: Alexander Graf <agraf@suse.de> --- v1 -> v2: - Use efi_status_t in all occurences
2018-01-28efi: Conflict efi_loader with different stub bitnessAlexander Graf
We have 2 users of the EFI headers: efi_loader and the EFI stub. Efi_loader always expects that the bitness of the definitions it uses is identical to the execution. The EFI stub however allows to run x86_64 U-Boot on 32bit EFI and the other way around, so it allows for different bitness of EFI definitions and U-Boot environment. This patch explicitly requests via Kconfig that efi_loader can only be enabled if the bitness is identical. Because we can run efi_loader on x86_64 without EFI stub enabled, it also ensures that this case propagates the correct ABI constraints. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28libfdt: migrate libfdt.h to a wrapper + U-Boot own codeMasahiro Yamada
There is tons of code duplication between lib/libfdt/libfdt.h and scripts/dtc/libfdt/libfdt.h. Evacuate the U-Boot own code to include/libfdt.h and remove lib/libfdt/libfdt.h. For host tools, <libfdt.h> should include scripts/dtc/libfdt/libfdt.h, which is already suitable for user-space. For compiling U-Boot, <linux/libfdt.h> should be included because we need a different libfdt_env.h . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-28libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.cMasahiro Yamada
The only difference between scripts/dtc/libfdt/fdt_rw.c and lib/libfdt/fdt_rw.c is fdt_remove_unused_strings(). It is only used by fdtgrep, so we do not need to compile it for U-Boot image. Move it to tools/libfdt/fdw_rw.c so that lib/libfdt/fdt_rw.c can be a wrapper of scripts/dtc/libfdt/fdt_rw.c. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-26Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-01-26net: regex: Disable by default on sunXiMaxime Ripard
The sunXi arm64 build has overflown, leading to the main U-boot binary overwriting the environment when flashing the new image, or even worse, overwriting itself when we're calling saveenv. Disable this option that is not critical until we can adress the issue properly. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-22efi_selftest: reduce noise in test output for device treesHeinrich Schuchardt
Some messages are only useful if an error occurs. Fix a use after free. Add a missing free. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: allow creation of more device part nodesHeinrich Schuchardt
Create device path nodes for UCLASS_ETH udevices. Create device path nodes of block device children of UCLASS_MMC udevices. Consistently use debug for unsupported nodes. Set the log level to error. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Fix build failure by adding #ifdef CONFIG_DM_ETH] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: provide a test for block ioHeinrich Schuchardt
This test checks the driver for block IO devices. A disk image is created in memory. A handle is created for the new block IO device. The block I/O protocol is installed on the handle. ConnectController is used to setup partitions and to install the simple file protocol. A known file is read from the file system and verified. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_driver: EFI block driverHeinrich Schuchardt
This patch provides * a uclass for EFI drivers * a EFI driver for block devices For each EFI driver the uclass * creates a handle * adds the driver binding protocol The uclass provides the bind, start, and stop entry points for the driver binding protocol. In bind() and stop() it checks if the controller implements the protocol supported by the EFI driver. In the start() function it calls the bind() function of the EFI driver. In the stop() function it destroys the child controllers. The EFI block driver binds to controllers implementing the block io protocol. When the bind function of the EFI block driver is called it creates a new U-Boot block device. It installs child handles for all partitions and installs the simple file protocol on these. The read and write functions of the EFI block driver delegate calls to the controller that it is bound to. A usage example is as following: U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and exposes a handle with the block IO protocol. It calls ConnectController. Now the EFI block driver installs the partitions with the simple file protocol. iPXE uses the simple file protocol to load Grub or the Linux Kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: add comment on calloc len] Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: add missing LF in test outputHeinrich Schuchardt
The output of the minicapps lacks a line feed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: test start imageHeinrich Schuchardt
This pair of tests checks the StartImage boot service. Each test loads an EFI application into memory and starts it. One returns by calling the Exit boot service. The other returns directly. The tests are not built on x86_64 because the relocation code for the efi binary cannot be created. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix ExitBootServicesHeinrich Schuchardt
This patch lets the implementation of ExitBootServices conform to the UEFI standard. The timer events must be disabled before calling the notification functions of the exit boot services events. The boot services must be disabled in the system table. The handles in the system table should be defined as efi_handle_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: add check_tpl parameter to efi_signal_eventHeinrich Schuchardt
In ExitBootServices we need to signal events irrespective of the current TPL level. A new parameter check_tpl is added to efi_signal_event(). Function efi_console_timer_notify() gets some comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide function to get last node of a device pathHeinrich Schuchardt
On a block device and its partitions the same protocols can be installed. To tell the apart we can use the type of the last node of the device path which is not the end node. The patch provides a utility function to find this last node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitionsHeinrich Schuchardt
Add the revision constants. Depending on the revision additional fields are needed in the media descriptor. Use efi_uintn_t for number of bytes to read or write. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_disk_create_partitions a global symbolHeinrich Schuchardt
Up to now we have been using efi_disk_create_partitions() to create partitions for block devices that existed before starting an EFI application. We need to call it for block devices created by EFI applications at run time. The EFI application will define the handle for the block device and install a device path protocol on it. We have to use this device path as stem for the partition device paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: provide a function to create a partition nodeHeinrich Schuchardt
Provide new function efi_dp_part_node() to create a device node for a partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: make efi_block_io_guid a global symbolHeinrich Schuchardt
The GUID of the EFI_BLOCK_IO_PROTOCOL is needed in different code parts. To avoid duplication make efi_block_io_guid a global symbol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: efi_disk_register: correctly determine if_type_nameHeinrich Schuchardt
The interface type name can be used to look up the interface type. Don't confound it with the driver name which may be different. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: fix StartImage bootserviceHeinrich Schuchardt
The calling convention for the entry point of an EFI image is always 'asmlinkage'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: check tables in helloworld.efiHeinrich Schuchardt
Check if the device tree and the SMBIOS table are available. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: allocate correct memory type for EFI imageHeinrich Schuchardt
The category of memory allocated for an EFI image should depend on its type (application, bootime service driver, runtime service driver). Our helloworld.efi built on arm64 has an illegal image type. Treat it like an EFI application. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: print device path when entering efi_load_imageHeinrich Schuchardt
Use %pD to print the device path instead of its address when entering efi_load_image. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: correct find simple file system protocolHeinrich Schuchardt
In contrast to the description the code did not split the device path into device part and file part. The code should use the installed protocol and not refer to the internal structure of the the disk object. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: address of the simple file system protocolHeinrich Schuchardt
When installing the the simple file system protocol we have to path the address of the structure and not the address of a pointer to the structure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: return NULL from device path functionsHeinrich Schuchardt
For the construction of device paths we need to call the AllocatePool service. We should not ignore if it fails due to an out of memory situation. This patch changes the device path functions to return NULL if the memory allocation fails. Additional patches will be needed to fix the callers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_loader: consistently use efi_handle_t for handlesHeinrich Schuchardt
We should consistently use the efi_handle_t typedef when referring to handles. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: test for (Dis)ConnectControllerHeinrich Schuchardt
This unit test checks the following protocol services: ConnectController, DisconnectController, InstallProtocol, UninstallProtocol, OpenProtocol, CloseProtcol, OpenProtocolInformation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in device path testHeinrich Schuchardt
The installation of UninstallProtocol is functional now. So we do not expect errors when calling it. Call UninstallProtocol with correct level of indirection for parameter handle. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22efi_selftest: remove todo in manage protocolsHeinrich Schuchardt
The installation of UninstallProtocols is functional now. So we do not expect errors when calling it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-26 01:00:38 +0000