summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2019-07-10trace: do not limit trace buffer to 2GiBHeinrich Schuchardt
There is no good reason to limit the trace buffer to 2GiB on a 64bit system. Adjust the types of the relevant parameters. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10trace: make call depth limit customizableHeinrich Schuchardt
Up to now we had hard coded values for the call depth up to which trace records are created: 200 for early tracing, 15 thereafter. UEFI applications reach a call depth of 80 or above. Provide customizing settings for the call trace depth limit and the early call trace depth limit. Use the old values as defaults. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10trace: conserve gd registerHeinrich Schuchardt
An UEFI application may change the value of the register that gd lives in. But some of our functions like get_ticks() access this register. So we have to set the gd register to the U-Boot value when entering a trace point and set it back to the application value when exiting the trace point. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10fdtdec: test: Fix memory leakThierry Reding
Free the memory allocated to store the test FDT upon test completion to avoid leaking the memory. We don't bother cleaning up on test failure since the code is broken in that case and should be fixed, in which case the leak would also go away. Reported-by: Tom Rini <tom.rini@gmail.com> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10sandbox: Quit when hang() is calledSimon Glass
It doesn't make a lot of sense to hang on sandbox when hang() is called, since the only way out is Ctrl-C. In fact, Ctrl-C does not work if the terminal is in raw mode, which it will be if the command-line has not been reached yet. In that case, Ctrl-Z / kill -9 must be used, which is not very friendly. Avoid all of this by quiting when hang() is called. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-06efi_loader: detach runtime in ExitBootServices()Heinrich Schuchardt
Linux can be called with a command line parameter efi=novamap, cf. commit 4e46c2a95621 ("efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted"). In this case SetVirtualAddressMap() is not called after ExitBootServices(). OpenBSD 32bit does not call SetVirtualAddressMap() either. Runtime services must be set to an implementation supported at runtime in ExitBootServices(). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: simplify detachingHeinrich Schuchardt
We do not need any array typed detach list. Let's simply update the pointers directly. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: decision on EFI_RT_SUPPORTED_RESET_SYSTEMHeinrich Schuchardt
Move the logic determining which board supports reset at runtime to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: split off detaching SetVirtualAddress()Heinrich Schuchardt
The runtime services SetVirtualAddress() and ConvertPointer() become unavailable after SetVirtualAddress(). Other runtime services become unavailable after ExitBootServices. Move the update of SetVirtualAddress() and ConvertPointer() to efi_relocate_runtime_table(). Use functions with the correct signature when detaching. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: test variable services at runtimeHeinrich Schuchardt
Provide a unit test for the variable services at runtime. Currently we expect EFI_UNSUPPORTED to be returned as the runtime implementation is still missing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: unimplemented runtime servicesHeinrich Schuchardt
Unimplemented runtime services should always return EFI_UNSUPPORTED as described in the UEFI 2.8 spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: let the variable driver patch out the runtimeHeinrich Schuchardt
Our variable services are only provided at boottime. Therefore when leaving boottime the variable function are replaced by dummy functions returning EFI_UNSUPPORTED. Move this patching of the runtime table to the variable services implementation. Executed it in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: clean up runtime detachingHeinrich Schuchardt
The detaching of the runtime will have to move to ExitBootServices() to encompass operating system that do not call SetVirtualAddressMap(). This patch changes the logic for the relocation of the pointers in the runtime table such that the relocation becomes independent of the entries in the detach list. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove NULL entries from runtime detach listHeinrich Schuchardt
Some entries in the system table are set to NULL in ExitBootServices(). We had them in the runtime detach list to avoid relocation of NULL. Let's instead assign the pointers dynamically in efi_initialize_system_table() to avoid the relocation entry. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: initialization of variable servicesHeinrich Schuchardt
Provide an initialization routine for variable services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: move efi_query_variable_info()Heinrich Schuchardt
Let's keep similar things together. Move efi_query_variable_info() to lib/efi_loader/efi_variable.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: remove superfluous spaces in commentsHeinrich Schuchardt
Leave only a single space after * if not aligning. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_selftest: description of CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
The current short description has a typo. Let it stand out clear that we provide unit tests. Improve the description of the CMD_BOOTEFI_SELFTEST configuration option. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-06-21Merge tag 'efi-2019-07-rc5-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.07-rc5 (3) This pull request provides error fixes for the graphical output protocol, the text output protocol, and the extended text input protocol. Setting the boot device for the bootefi command is now not only supported by the 'load' command but also for the file system specific commands like 'fatload'.
2019-06-21lib: Makefile: build fdtdec_common.c when OF_LIBFDT selectedPeng Fan
When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int not defined, however fdtdec.c will use fdtdec_get_int, so let's compile fdtdec_common.c when OF_LIBFDT selected. Since there is also SPL_OF_LIBFDT, so need to use CONFIG_$(SPL_TPL_)OF_LIBFDT. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-06-20efi_loader: fix typo in efi_variable.cHeinrich Schuchardt
%s/efi_efi_/efi_/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: Delete() return EFI_WARN_DELETE_FAILUREHeinrich Schuchardt
If EFI_FILE_PROTOCOL.Delete() fails, always close the handle and return EFI_WARN_DELETE_FAILURE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: ListPackageLists() return EFI_NOT_FOUNDHeinrich Schuchardt
If no matching package list is found in ListPackageLists(), return EFI_NOT_FOUND. If we do not support a package type, we will not find a matching package list. Remove the unreachable EFI_PRINTF() statements. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: console incorrectly advertised left logo keyHeinrich Schuchardt
Avoid to signal that the left logo key is pressed, when it is not. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: alternative scan codes for F5, END, HOMEHeinrich Schuchardt
Depending on the key board alternative scan codes are used for F5, END, and HOME. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: GOP: provide accurate mode informationHeinrich Schuchardt
For 5:6:5 modes provide correct frame buffer information. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: SetMode() must blank screenHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() must blank the screen. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: system table setupHeinrich Schuchardt
When setting up the system table avoid superfluous void * conversions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: QueryMode() must allocate bufferHeinrich Schuchardt
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the mode information structure. Adjust the unit test to free the buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: SetMode() parameters checkHeinrich Schuchardt
If EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() is called with an invalid mode, return EFI_UNSUPPORTED. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: QueryMode() check parametersHeinrich Schuchardt
Check the parameters of EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20efi_loader: Blt() with incorrect BltOperationHeinrich Schuchardt
If EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() is called with an invalid value of BltOperation return EFI_INVALID_PARAMETER. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: fix SetAttribute()Heinrich Schuchardt
The SetAttribute() service and the Reset() service of the simple text output protocol must update the attribute value in the mode information. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: fix SetMode()Heinrich Schuchardt
Correct the check of the mode number in SetMode() service of the simple text output protocol. Clear the screen in SetMode(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: GetTime() must return EFI_UNSUPPORTEDHeinrich Schuchardt
If the GetTime() runtime service is not supported, EFI_UNSUPPORTED has to be returned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: add RuntimeServicesSupported variableAKASHI Takahiro
This variable is defined in UEFI specification 2.8, section 8.1. Its value should be updated whenever we add any usable runtime services function. Currently we only support SetVirtualAddress() for all systems and ResetSystem() for some. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: parameter checks SetVariable()Heinrich Schuchardt
Return EFI_INVALID_PARAMETER if the variable name has zero length or the variable has runtime access but not boottime access. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: legal characters in StrToFat()Heinrich Schuchardt
The UEFI specification does not specify if the characters that have to be replaced by underscore in function StrToFat() of the Unicode collation protocol are those forbidden in FAT long names or those in FAT short names. EDK2 and UEFI SCT assume it is those forbidden in FAT 8.3 short names. Adjust the list of forbidden characters. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: MetaiMatch() must be case insensitiveHeinrich Schuchardt
The MetaiMatch() service of the UnicodeCollationProtocol2 must be case insensitive. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: AllocatePages() must accept addr == 0Heinrich Schuchardt
It must be possible to allocate memory at address 0 with AllocatePages(). Move a NULL pointer check. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: correct ExitBootServices()Heinrich Schuchardt
Always use EFI_EXIT() to return from the function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: loaded images cannot be started twiceHeinrich Schuchardt
If an image already has been started, return EFI_INVALID_PARAMETER when StartImage() is called for the same handle again. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: LoadImage must return EFI_NOT_FOUNDHeinrich Schuchardt
If the file path does not relate to an existing file, LoadImage() must return EFI_NOT_FOUND. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-14efi_loader: LoadImage w/o SourceBuffer and DevicePathHeinrich Schuchardt
If both SourceBuffer and DevicePath are NULL, LoadImage() must return EFI_INVALID_PARAMETER. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-12Merge tag 'efi-2019-07-rc5' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc5 This pull request provides fixes for event services.
2019-06-10efi_loader: implement event queueHeinrich Schuchardt
Up to now we have only been using a flag queued for events. But this does not satisfy the requirements of the UEFI spec. Events must be notified in the sequence of decreasing TPL level and within a TPL level in the sequence of signaling. Implement a queue for signaled events. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_selftest: correct event group testHeinrich Schuchardt
If any member of the event group is signaled, all members must be set to signaled and their notification functions have to be queued. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_loader: event signaling in ExitBootServicesHeinrich Schuchardt
ExitBootServices() has to stop timer related activity before calling the events of the EFI_EVENT_GROUP_EXIT_BOOT_SERVICES event group. But our current implementation was stopping all other events. All events have to observe the task priority level. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_loader: SignalEvent for event in signaled stateHeinrich Schuchardt
If an event is already in the signaled state, SignalEvent should not queue the notification function but simply return EFI_SUCCESS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-10efi_loader: RegisterProtocolNotify event signalingHeinrich Schuchardt
In a following patch efi_signal_event() will only queue an event if it is not signaled. Set the is_signaled status to false before signaling the event. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2024-12-28 01:13:43 +0000