summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2020-07-17binman: Add way to locate an entry in memorySimon Glass
Add support for accessing an entry's contents in memory-mapped SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17binman: Refactor binman_entry_find() to allow other nodesSimon Glass
At present we can only read from a top-level binman node entry. Refactor this function to produce a second local function which supports reading from any node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17binman: Allow setting the ROM offsetSimon Glass
On x86 the SPI ROM can be memory-mapped, at least most of it. Add a way to tell binman the offset from a ROM address to a RAM address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17dm: acpi: Enhance acpi_get_name()Simon Glass
For many device types it is possible to figure out the name just by looking at its uclass or parent. Add a function to handle this, since it allows us to cover the vast majority of cases automatically. However it is sometimes impossible to figure out an ACPI name for a device just by looking at its uclass. For example a touch device may have a vendor-specific name. Add a new "acpi,name" property to allow a custom name to be created. With this new feature we can drop the get_name() methods in the sandbox I2C and SPI drivers. They were only added for testing purposes. Update the tests to use the new values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for a generic power sequenceSimon Glass
Add a way for devices to enable and disable themselves using ACPI code that updates GPIOs. This takes several timing parameters and supports enable, reset and stop. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for writing a GPIO power sequenceSimon Glass
Power to some devices is controlled by GPIOs. Add a way to generate ACPI code to enable and disable a GPIO so that this can be handled within an ACPI method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for writing a Power ResourceSimon Glass
These are used in ACPI to disable power to various pats of the system when in sleep. Add a way to create a power resource, with the caller finishing off the details. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add support for various misc ACPI opcodesSimon Glass
Add more functions to handle some miscellaneous ACPI opcodes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support copying properties from device tree to ACPISimon Glass
Some drivers in Linux support both device tree and ACPI. U-Boot itself uses Linux device-tree bindings for its own configuration but does not use ACPI. It is convenient to copy these values over to the ACPI DP table for passing to linux. Add some convenience functions to help with this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a GPIOSimon Glass
Allowing writing out a reference to a GPIO within the ACPI output. This can be used by ACPI code to access a GPIO at runtime. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing Device Properties objects via _DSDSimon Glass
More complex device properties can be provided to drivers via a device-specific data (_DSD) object. To create this we need to build it up in a separate data structure and then generate the ACPI code, due to its recursive nature. Add an implementation of this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a UUIDSimon Glass
ACPI supports writing a UUID in a special format. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a nameSimon Glass
ACPI supports storing names which are made up of multiple path components. Several special cases are supported. Add a function to emit a name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing a stringSimon Glass
ACPI supports storing a simple null-terminated string. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support writing an integerSimon Glass
ACPI supports storing integers in various ways. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpigen: Support writing a packageSimon Glass
A package collects together several elements. Add an easy way of writing a package header and updating its length later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpigen: Support writing a lengthSimon Glass
It is convenient to write a length value for preceding a block of data. Of course the length is not known or is hard to calculate a priori. So add a way to mark the start on a stack, so the length can be updated when known. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of SPI descriptorSimon Glass
Add a function to write a SPI descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of I2C descriptorSimon Glass
Add a function to write a GPIO descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of a GPIO/irq for a deviceSimon Glass
Some devices use interrupts but some use GPIOs. Since these are fully specified in the device tree we can automatically produce the correct ACPI descriptor for a device. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of GPIO descriptorSimon Glass
Add a function to write a GPIO descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: Drop comment about the type always being ACPI_GPIO_TYPE_IO] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support string outputSimon Glass
Add support for output of strings and streams of bytes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of interrupt descriptorSimon Glass
Add a function to write an interrupt descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of ACPI codeSimon Glass
Add a new file to handle generating ACPI code programatically. This is used when information must be dynamically added to the tables, e.g. the SSDT. Initial support is just for writing simple values. Also add a 'base' value so that the table can be freed. This likely doesn't happen in normal code, but is nice to do in tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add a way to check device statusSimon Glass
At present U-Boot does not support the different ACPI status values, but it is best to put this logic in a central place. Add a function to get the device status. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Add a function to get a device path and scopeSimon Glass
Add a function to build up the ACPI path for a device and another for its scope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17timer: Allow delays with a 32-bit microsecond timerSimon Glass
The current get_timer_us() uses 64-bit arithmetic on 32-bit machines. When implementing microsecond-level timeouts, 32-bits is plenty. Add a new function that uses an unsigned long. On 64-bit machines this is still 64-bit, but this doesn't introduce a penalty. On 32-bit machines it is more efficient. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-16efi_loader: pre-seed UEFI variablesHeinrich Schuchardt
Include a file with the initial values for non-volatile UEFI variables into the U-Boot binary. If this variable is set, changes to variable PK will not be allowed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: identify PK, KEK, db, dbx correctlyHeinrich Schuchardt
To determine if a varible is on the of the authentication variables PK, KEK, db, dbx we have to check both the name and the GUID. Provide a function converting the variable-name/guid pair to an enum and use it consistently. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: configuration of variables storeHeinrich Schuchardt
The file based and the OP-TEE based UEFI variable store are mutually exclusive. Define them as choice options in Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: update secure stateHeinrich Schuchardt
Update the UEFI secure state when variable 'PK' is updated in the TEE variables implementation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-07-16efi_loader: restructure code for TEE variablesHeinrich Schuchardt
When using secure boot functions needed both for file and TEE based UEFI variables have to be moved to the common code module efi_var_common.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: display RO attribute with TEE-backed variablesIlias Apalodimas
A previous commit adds support for displaying variables RO flag. Let's add it on the TEE backed variable storage as well. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_selftest: adjust runtime test for variablesHeinrich Schuchardt
As variable services are available at runtime we have to expect EFI_SUCCESS when calling the services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: enable UEFI variables at runtimeHeinrich Schuchardt
Enable UEFI variables at runtime. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: use memory based variable storageHeinrich Schuchardt
Saving UEFI variable as encoded U-Boot environment variables does not allow implement run-time support. Use a memory buffer for storing UEFI variables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: memory buffer for variablesHeinrich Schuchardt
Saving UEFI variable as encoded U-Boot environment variables does not allow support at runtime. Provide functions to manage a memory buffer with UEFI variables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: new function efi_memcpy_runtime()Heinrich Schuchardt
Provide a memcpy() function that we can use at UEFI runtime. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: optional pointer for ConvertPointerHeinrich Schuchardt
If the EFI_OPTIONAL_PTR is set in DebugDisposition, a NULL pointer does not constitute an invalid parameter. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: export efi_convert_pointer()Heinrich Schuchardt
We need ConvertPointer() to adjust pointers when implementing runtime services within U-Boot. After ExitBootServices() gd is not available anymore. So we should not use EFI_ENTRY() and EFI_EXIT(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: UEFI variable persistenceHeinrich Schuchardt
Persist non-volatile UEFI variables in a file on the EFI system partition. The file is written whenever a non-volatile UEFI variable is changed after initialization of the UEFI sub-system. The file is read during the UEFI sub-system initialization to restore non-volatile UEFI variables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: secure boot flagHeinrich Schuchardt
In audit mode the UEFI variable SecureBoot is set to zero but the efi_secure_boot flag is set to true. The efi_secure_boot flag should match the UEFIvariable SecureBoot. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: read-only AuditMode and DeployedModeHeinrich Schuchardt
Set the read only property of the UEFI variables AuditMode and DeployedMode conforming to the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: value of VendorKeysHeinrich Schuchardt
According to the UEFI specification the variable VendorKeys is 1 if the "system is configured to use only vendor-provided keys". As we do not supply any vendor keys yet the variable VendorKeys must be zero. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: keep attributes in efi_set_variable_intHeinrich Schuchardt
Do not change the value of parameter attributes in function efi_set_variable_int(). This allows to use it later. Do not use variable attr for different purposes but declare separate variables (attr and old_attr). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: simplify boot managerHeinrich Schuchardt
Simplify the implementation of the UEFI boot manager: * avoid EFI_CALL for SetVariable() and GetVariable() * remove unnecessary type conversions Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: OsIndicationsSupported, PlatformLangCodesHeinrich Schuchardt
UEFI variables OsIndicationsSupported, PlatformLangCodes should be read only. Avoid EFI_CALL() for SetVariable(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: separate UEFI variable API from implemementationHeinrich Schuchardt
Separate the remaining UEFI variable API functions GetNextVariableName and QueryVariableInfo() from internal functions implementing them. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: prepare for read only OP-TEE variablesHeinrich Schuchardt
We currently have two implementations of UEFI variables: * variables provided via an OP-TEE module * variables stored in the U-Boot environment Read only variables are up to now only implemented in the U-Boot environment implementation. Provide a common interface for both implementations that allows handling read-only variables. As variable access is limited to very few source files put variable related definitions into new include efi_variable.h instead of efi_loader. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-11efi_loader: NULL dereference in efi_convert_pointerHeinrich Schuchardt
Avoid a possible NULL pointer dereference in efi_convert_pointer(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>