summaryrefslogtreecommitdiff
path: root/test/py
AgeCommit message (Collapse)Author
2020-02-05test: efi_selftest: fix pylint warningsHeinrich Schuchardt
Fix pylint warnings: * add missing module and function documentation * correct indentation Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-05test: test_efi_fit: fix pylint warningsHeinrich Schuchardt
Fix warnings issued by pylint: * naming of variables * usage of commas and semicolons * indentation * placement of module description Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-04test/py: android: Add test for abootimgSam Protsenko
Unit test for 'abootimg' command. Right now it covers dtb/dtbo functionality in Android Boot Image v2, which was added recently. Running test: $ ./test/py/test.py --bd sandbox --build -k test_abootimg shows that 1/1 tests passes successfully. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04doc: android: Convert to Sphinx formatSam Protsenko
Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-16Merge tag 'xilinx-for-v2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
2020-01-15test/py: use valid device tree in test_fit.pyHeinrich Schuchardt
The device tree compiler expects that a node with a unit-address has a reg property. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14test/py: hush_if_test: Add tests to cover octal/hex valuesMichal Simek
Extend test suite to cover also automatic octal/hex converstions which haven't been implemented in past. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07test/py: Create a test for launching UEFI binaries from FIT imagesCristian Ciocaltea
This test verifies the implementation of the 'bootm' extension that handles UEFI binaries inside FIT images (enabled via CONFIG_BOOTM_EFI). Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: describe env__efi_loader_helloworld_fileHeinrich Schuchardt
Describe the components of environment variable env__efi_loader_helloworld_file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: Fix broken 'notbuildconfigspec' markerCristian Ciocaltea
Consider the following test sample: @pytest.mark.buildconfigspec('fit') @pytest.mark.notbuildconfigspec('generate_acpi_table') def test_sample(u_boot_console): Whatever the argument of the 'notbuildconfigspec' is, the test ends up being skipped with the message: ('/uboot/test/py/conftest.py', 463, 'Skipped: .config feature "fit" enabled') Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-02test: Fix the boardspec for the SPL handoff testSimon Glass
This test currently does not run because it specifies the sandbox board instead of sandbox_spl. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-02test_env: don't strip() printenv resultsStephen Warren
get_env() was originally written to strip() the output of printenv to isolate the test from any whitespace changes in printenv's output. However, this throws away any whitespace in the variable value, which can cause issues when test code expects to see that whitespace. In fact, printenv never adds any whitespace at all, so there's no need to strip. The strip causes a practical problem for test_env_echo_exists() if state_test_env.get_existent_var() happens to choose a U-Boot variable that contains trailing whitespace. This is true for variable boot_targets. With Python 2, get_existent_var() never returned boot_targets so this issue never caused a practical problem. With Python 3, get_existent_var does sometimes return boot_targets, no doubt due to Python 3's different dict hash key order implementation, about 0.5-2% of the time, so this test appears intermittent. With the strip removed, this intermittency is solved, since the test passes for all possible U-Boot variables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-12-10test.py: Make search for autoconf.mk more permissiveSimon Glass
Buildman doesn't store this file in the same directory as a normal build. Update the conftest code to handle both cases. Change-Id: I1fd0e56054d7dc77394a7589336aa0991bd0133d Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-05test/py: test_fs: add tests for creating/deleting many filesAKASHI Takahiro
# This is actually a resent patch of # [1] https://lists.denx.de/pipermail/u-boot/2019-May/369170.html Two test cases are added under test_fs_ext: test case 10: for root directory test case 11: for non-root directory Those will verify a behavior fixed by the commits related to root directory ("fs: fat: allocate a new cluster for root directory of fat32" and "fs: fat: flush a directory cluster properly"), and focus on handling long-file-name directory entries under a directory. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-10-30test/py: Use raw strings more to avoid deprecation warningsTom Rini
We have two further uses of raw string usage in the test/py codebase that are used under CI. The first of which is under the bind test and is a direct update. The second of which is to strip VT100 codes from the match buffer. While switching this to a raw string is also a direct update, the comment it notes that problems were encountered on Ubuntu 14.04 (and whatever Python 2 version that was) that required slight tweaks to the regex. Replace that now that we're saying Python 3.5 is the minimum. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Update docs, add requirements.txt for pipTom Rini
To be more closely aligned with Python community best practices, we need to better document our usage of pip and make use of a requirements.txt file that shows the versions of the tools that we are using. This will aide in ensuring reproducibility of our tests as well. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Rework test.py to be a different kind of wrapperTom Rini
Now that we have moved to being based on pytest for python3 we need to make our test.py wrapper more robust in terms of only calling python3 rather than possibly finding and using python2. To do this, change from execvp()'ing pytest to invoking the package itself via python. In the event that pytest is unavailable we still get a user-friendly error: pkg_resources.DistributionNotFound: The 'pytest' distribution was not found and is required by the application Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Update test_fs to decode check_output callsTom Rini
The check_output function from the subprocess Python module by default returns data as encoded bytes and leaves decoding to the application. Given our uses of the call, it makes the most sense to immediately decode the results. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: test_efi_selftest.py: Updates for python 3 supportTom Rini
- In python 3 you must use raw strings for regex as other forms are deprecated and would require further changes to the pattern here. In one case this lets us have a simpler match pattern. - As strings are now Unicode our complex tests (Euro symbol, SHIFT+ALT+FN 5) we need to declare that as a bytes string and then decode it for use. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: test_ut.py: Ensure we use bytesTom Rini
In the case of some unit tests we are working with providing a fake flash device that we have written some text strings in to. In this case we want to tell Python to encode things to bytes for us. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Manual python3 fixesTom Rini
- Modern pytest is more visible in telling us about parameters that we had not described, so describe a few more. - ConfigParser.readfp(...) is now configparser.read_file(...) - As part of the "strings vs bytes" conversions in Python 3, we use the default encoding/decoding of utf-8 but in some places tell Python to replace problematic conversions rather than throw a fatal error. - Fix a typo noticed while doing the above ("tot he" -> "to the"). - As suggested by Stephen, re-alphabetize the import list - Per Heinrich, replace how we write contents in test_fit.py Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Automated conversion to Python 3Tom Rini
Use the 2to3 tool to perform numerous automatic conversions from Python 2 syntax to Python 3. Also fix whitespace problems that Python 3 catches that Python 2 did not. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Fix pytest4 deprecation warningsMarek Vasut
Fix the following spit from pytest: u-boot/test/py/conftest.py:438: RemovedInPytest4Warning: MarkInfo objects are deprecated as they contain merged marks which are hard to deal with correctly. Please use node.get_closest_marker(name) or node.iter_markers(name). Docs: https://docs.pytest.org/en/latest/mark.html#updating-code for board in mark.args: In both cases, the later suggestion is applicable. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Igor Opaniuk <igor.opaniuk@gmail.com> [trini: Update for current file with a few more cases, un-pin pytest in CI] Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30test/py: Split mark to multiple linesTom Rini
We inconsistently note multiple dependencies today in our tests, sometimes with a single line that declares multiple and sometimes multiple single lines. Current pytest seems to fail on the single line format so change to multiple declarations. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> [on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-15dm: Tidy up dump output when there are many devicesPatrick Delaunay
At present the 'Index' column of 'dm tree' assumes there is two digits, this patch increase it to 3 digits. It also aligns output of 'dm uclass', assuming the same 3 digits index. The boards with CONFIG_PINCTRL_FULL activated have one pinconfig by pin configuration, so they can have more than 100 devices pinconfig (for example with stm32mp157c-ev1 board we have 106 pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15pytest: vboot: add a test for required keyPhilippe Reynes
This commit add a test in the vboot test to check that when a required key is asked, only FIT signed with this key is used/accepted by u-boot. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-08-20test/py: Add cmd_memory dependency back to test_mmc_wrMichal Simek
Based on discussion with Stephen Warren there was recommendation to list both memory and random command dependencies just in case that dependency is not properly handled by Kconfig. Fixes: a09c1f7e1c1b ("test/py: Fix MMC/SD block write test dependency") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2019-08-09test/py: Fix MMC/SD block write test dependencyMichal Simek
Test is using random command which has own Kconfig symbol CMD_RANDOM which already depends on CMD_MEMORY. That's why replace cmd_memory by cmd_random. Fixes: 09da18deab8b ("test/py: add MMC/SD block write test") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-07test/py: avb: Move AVB test to android dirSam Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07fit: Do not automatically decompress ramdisk imagesJulius Werner
The Linux ramdisk should always be decompressed by the kernel itself, not by U-Boot. Therefore, the 'compression' node in the FIT image should always be set to "none" for ramdisk images, since the only point of using that node is if you want U-Boot to do the decompression itself. Yet some systems populate the node to the compression algorithm used by the kernel instead. This used to be ignored, but now that we support decompression of all image types it becomes a problem. Since ramdisks should never be decompressed by U-Boot anyway, this patch adds a special exception for them to avoid these issues. Still, setting the 'compression' node like that is wrong in the first place, so we still want to print out a warning so that third-party distributions doing this can notice and fix it. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-31test/py: add MMC/SD block write testJean-Jacques Hiblot
Add a standalone MMC block write test. This allows direct testing of MMC access rather than relying on doing so as a side-effect of e.g. DFU or UMS testing, which may not be enabled on all platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2019-07-29fit: Support compression for non-kernel components (e.g. FDT)Julius Werner
This patch adds support for compressing non-kernel image nodes in a FIT image (kernel nodes could already be compressed previously). This can reduce the size of FIT images and therefore improve boot times (especially when an image bundles many different kernel FDTs). The images will automatically be decompressed on load. This patch does not support extracting compatible strings from compressed FDTs, so it's not very helpful in conjunction with CONFIG_FIT_BEST_MATCH yet, but it can already be used in environments that select the configuration to load explicitly. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-24test/py: Add base test case for A/B updatesRuslan Trofymenko
Add sandbox test for 'ab_select' command. Test: ./test/py/test.py --bd sandbox --build -k test_ab Signed-off-by: Ruslan Trofymenko <ruslan.trofymenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alistair Strachan <astrachan@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24treewide: Fix stale references of Android docsEugeniu Rosca
Commit 9bdf0e8fef86 ("doc: relocate/rename Android README and add BCB overview") left some obsolete references of Android documents/paths. This has been pointed out by Sam (thanks!) in: https://patchwork.ozlabs.org/patch/1104245/#2208134 Fixes: 9bdf0e8fef86 ("doc: relocate/rename Android README and add BCB overview") Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Suggested-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-07-18test/py: gpt: Use long options for sgdiskSam Protsenko
sgdisk 0.8.10.2 from AOSP doesn't support short options, failing with errors like this: sgdisk: invalid option -- 'U' Test fails due to that error. Let's use long options to make the test work with any sgdisk version. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-10test: check u-boot properties in SPL device treePatrick Delaunay
Add a test to check the management of the U-boot relocation properties for device tree SPL generation (fdtgrep result) and platdata: - 'dm-pre-proper' and 'dm-tpl' not included in SPL - 'dm-pre-reloc' and 'dm-spl' included in SPL Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-06test/py: not all boards support UEFI runtime resetHeinrich Schuchardt
As not all boards support resets at runtime do not test for it in the Python tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06test/py: error message test_efi_selftest_device_treeHeinrich Schuchardt
Correct the error message in test_efi_selftest_device_tree(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-09test/py: don't use mmc_rd config for other mmc testsStephen Warren
Fix test_mmc_dev(), test_mmc_rescan(), test_mmc_info() not to use the same configuration data that test_mmc_rd() does. Doing so causes the following issues: * The new code uncondtionally expects certain keys to exist in the configuration data. These keys do not exist in existing configuration data since they were not previously required, and there was no notification re: a requirement to add these new keys. This causes test failures due to thrown exceptions when accessing the non-existent keys. * The new tests logically operate on different objects. test_mmc_rd() operates on ranges of sectors on an MMC device (which may be the entire set of sectors of a device, or a part of a device), whereas all the new tests operate solely on entire devices. These are separate things, and it's entirely likely that the user will wish to runs the two types of tests on different sets of data; see the example configuration data that this commit adds. Ideally, the new tests would have been added to a separate Python file, since they aren' closely related to the existing tests. FIXME: Marek, can you please replace the "???" in this patch with some reasonable looking data? Thanks. Cc: Marek Vasut <marek.vasut@gmail.com> Fixes: 4ffec8cdf512 ("test/py: mmc: Add 'mmc info' test") Fixes: ce4b2cafa79c ("test/py: mmc: Add 'mmc rescan' test") Fixes: 86dfd152c917 ("test/py: mmc: Add 'mmc dev' test") Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-26avb: add support for named persistent valuesIgor Opaniuk
AVB 2.0 spec. revision 1.1 introduces support for named persistent values that must be tamper evident and allows AVB to store arbitrary key-value pairs [1]. Introduce implementation of two additional AVB operations read_persistent_value()/write_persistent_value() for retrieving/storing named persistent values. Correspondent pull request in the OP-TEE OS project repo [2]. [1]: https://android.googlesource.com/platform/external/avb/+/android-9.0.0_r22 [2]: https://github.com/OP-TEE/optee_os/pull/2699 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-04-23efi_selftest: do not run FDT test with ACPI table.Heinrich Schuchardt
The EBBR specification prescribes that we should have either an ACPI table or a device tree but not both. So do not run the device tree unit test on boards with an ACPI table. Hence there is no need any longer to make it 'on request' only. Do not pass $fdtcontroladdr to `bootefi selftest`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23test/py: pytest.mark.notbuildconfigspec()Heinrich Schuchardt
We already can let a Python test depend on a build option being set via @pytest.mark.buildconfigspec(). It may be necessary to let a test depend on a build option *not* being set. So let's introduce @pytest.mark.notbuildconfigspec for this purpose. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-16test: py: Extend fpga test with fit image with external dataMichal Simek
Images are created mkimage -f fit.its -E download-fit-external.ub and test expects these entries. env__fpga_under_test = { ... "mkimage_fit_external": download-fit-external.ub", "mkimage_fit_external_size": xxxxx, ... } Test download file and loads it to fpga. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-10test.py: Disable fsck for FAT tests for nowTom Rini
Currently enabling fsck on FAT16/FAT32 exposes that we have problems with: TestFsBasic.test_fs13[fat16] TestFsBasic.test_fs11[fat32] TestFsBasic.test_fs12[fat32] TestFsBasic.test_fs13[fat32] TestFsExt.test_fs_ext1[fat32] TestFsExt.test_fs_ext2[fat32] TestFsExt.test_fs_ext3[fat32] TestFsExt.test_fs_ext4[fat32] TestFsExt.test_fs_ext5[fat32] TestFsExt.test_fs_ext6[fat32] TestFsExt.test_fs_ext7[fat32] TestFsExt.test_fs_ext8[fat32] TestFsExt.test_fs_ext9[fat32] TestMkdir.test_mkdir6[fat16] TestMkdir.test_mkdir1[fat32] TestMkdir.test_mkdir2[fat32] TestMkdir.test_mkdir3[fat32] TestMkdir.test_mkdir4[fat32] TestMkdir.test_mkdir5[fat32] TestMkdir.test_mkdir6[fat32] TestUnlink.test_unlink1[fat16] TestUnlink.test_unlink2[fat16] TestUnlink.test_unlink3[fat16] TestUnlink.test_unlink4[fat16] TestUnlink.test_unlink5[fat16] TestUnlink.test_unlink6[fat16] TestUnlink.test_unlink7[fat16] TestUnlink.test_unlink1[fat32] TestUnlink.test_unlink2[fat32] TestUnlink.test_unlink3[fat32] TestUnlink.test_unlink4[fat32] TestUnlink.test_unlink5[fat32] TestUnlink.test_unlink6[fat32] TestUnlink.test_unlink7[fat32] This is because we don't update the "information sector" on FAT32. While in the future we should resolve this problem and include that feature, we should enable fsck for ext4 to ensure that things remain in good shape there. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09test/py: mmc: Add 'mmc read' performance checkMarek Vasut
Add option to the mmc rd test to check the duration of the execution of the mmc read command. This allows intercepting read performance regressions. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09test/py: mmc: Add 'mmc info' testMarek Vasut
Add test for 'mmc info' subcommand. This tests whether the card information is obtained correctly and verifies the device, bus speed, bus mode and bus width. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09test/py: mmc: Add 'mmc rescan' testMarek Vasut
Add test for 'mmc rescan' subcommand. This tests whether the system can switch to a specific card and then rescan the card. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09test/py: mmc: Add 'mmc dev' testMarek Vasut
Add separate test for 'mmc dev' subcommand. This tests whether the system can switch to a specific card. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09test/py: mmc: Factor out device selectionMarek Vasut
Factor out the 'mmc dev' call so it can be recycled by other tests. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-23 18:40:48 +0000