summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-10-15binman: x86: Separate out 16-bit reset and init codeSimon Glass
At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Add support for an x86 'reset' sectionSimon Glass
At present binman has a single entry type for the 16-bit code code needed to start up an x86 processor. This entry is intended to include both the reset vector itself as well as the code to move to 32-bit mode. However this is not very flexible since in some cases other data needs to be included at the top of the SPI flash, in between these two pieces. For example Intel requires that a FIT (Firmware Image Table) pointer be placed 0x40 bytes before the end of the ROM. To deal with this, add a new reset entry for just the reset vector. A subsequent change will adjust the existing 'start16' entry. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Correct use of 'replace' in IFWI testsSimon Glass
At present the Intel IFWI entry uses 'replace' without the 'ifwi-' prefix. This is a fairly generic name which might conflict with the main Entry base class at some point, if more features are added. Add a prefix. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Handle hidden symbols in ELF filesSimon Glass
Some versions of binutils generate hidden symbols which are currently not parsed by binman. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Drop .note section from ELFSimon Glass
Recent versions of binutils add a '.note.gnu.property' into the ELF file. This is not required and interferes with the expected output. Drop it. Also fix testMakeElf() to use a different file for input and output. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15binman: Allow use of help and entry-docs without libfdtSimon Glass
At present if libfdt is not available binman can't do anything much. Improve the situation a little. Ideally there should be a test to cover this, but I'm not quite sure how to fake this. Signed-off-by: Simon Glass <sjg@chromium.org> (fixed up missing ReadChildData() enty test)
2019-10-15binman: Use cls instead of self for class methodsSimon Glass
It is more common to use the name 'cls' for the class object of a class method, to distinguish it from normal methods, which use 'self' Update the binman tests accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15patman: Update command.Run() to handle failure betterSimon Glass
At present tools are not expected to fail. If they do an exception is raised but there is no detail about what went wrong. This makes it hard to debug if something does actually go wrong. Fix this by outputting both stderr and stdout on failure. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-15patman: Drop binary parameterSimon Glass
Since cros_subprocess use bytestrings now, this feature not needed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-11binman: Use qemu-x86_defconfig in the exampleBin Meng
The doc currently uses sandbox_defconfig as examples of enabling debug/verbose output of binman. However during a sandbox build it does not call binman at all. Change it to qemu-x86_defconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Rename existing FSP code to fsp1 - Add fsp2 directory in preparation to support FSP 2.0 - Various x86 platform codes update - Various bug fixes and updates in dm core, sandbox and spl
2019-10-08buildman: Perform tests in a temporary directoryTom Rini
We may not always be able to write to the default output directory so have a temporary directory for our output be created. Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Suggested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HABStefano Babic
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-08tools: imx8m_image: align spl bin image sizePeng Fan
The loader for the DDR firmware in drivers/ddr/imx/imx8m/helper.c uses a 4-byte-aligned address to load the firmware. In cases where OF is enabled in SPL the dtb will be appended to the SPL binary and can result in a binary that is not aligned correctly. If OF is not enabled in SPL, `_end` is already aligned correctly, but this patch does not hurt. To ensure the correct alignment we use dd to create a temporary file u-boot-spl-pad.bin with the correct padding. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: Kconfig: Reduce default CONFIG_CSF_SIZEBreno Matheus Lima
The default CSF_SIZE defined in Kconfig is too high and SPL cannot fit into the OCRAM in certain cases. The CSF cannot achieve 0x2000 length when using RSA 4K key which is the largest key size supported by HABv4. According to AN12056 "Encrypted Boot on HABv4 and CAAM Enabled Devices" it's recommended to pad CSF binary to 0x2000 and append DEK blob to deploy encrypted boot images. As the maximum DEK blob size is 0x58 we can reduce CSF_SIZE to 0x2060 which should cover both CSF and DEK blob length. Update default_image.c and image.c to align with this change and avoid a U-Boot proper authentication failure in HAB closed devices: Authenticate image from DDR location 0x877fffc0... bad magic magic=0x32 length=0x6131 version=0x38 bad length magic=0x32 length=0x6131 version=0x38 bad version magic=0x32 length=0x6131 version=0x38 spl: ERROR: image authentication fail Fixes: 96d27fb218 (Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets") Reported-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-10-08logos: Add the TechNexion's logoFabio Estevam
Add the TechNexion's logo from their internal U-Boot tree. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets"Stefano Babic
This reverts commit 62a52f3f85bf33e286632e99f0d39b2c166af0c4.
2019-10-08habv4: tools: Avoid hardcoded CSF size for SPL targetsBreno Matheus Lima
Currently it's not possible to authenticate the U-Boot proper of mx6ul_14x14_evk_defconfig target: Authenticate image from DDR location 0x877fffc0... bad magic magic=0x0 length=0x00 version=0x3 bad length magic=0x0 length=0x00 version=0x3 bad version magic=0x0 length=0x00 version=0x3 spl: ERROR: image authentication fail Commit 0633e134784a ("imx: hab: Increase CSF_SIZE for i.MX6 and i.MX7 devices") has increased CSF_SIZE to avoid a possible issue when booting encrypted boot images. Commit d21bd69b6e95 ("tools: mkimage: add firmware-ivt image type for HAB verification") is hardcoding the CSF and IVT sizes, the new CSF size is not being considered and u-boot-ivt.img fails to boot. Avoid hardcoded CSF and IVT size to fix this issue. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_BOOT is enabledBreno Matheus Lima
In case CONFIG_SECURE_BOOT is enabled we need to limit the SPL size to avoid a possible HAB failure event: --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x14 0x42 0x33 0x22 0x33 0x00 0x00 0x00 0x00 0x0f 0x00 0x90 0x70 0x00 0x00 0x01 0x10 0x00 STS = HAB_FAILURE (0x33) RSN = HAB_INV_ADDRESS (0x22) CTX = HAB_CTX_TARGET (0x33) ENG = HAB_ENG_ANY (0x00) As explained in Commit 23612534fe0f ("spl: imx6: Provide a SPL_SIZE_LIMIT default") the i.MX6 SPL size limit is 68KB. The ROM code is copying the image size defined in boot data to its respective load address, in case we exceed the OCRAM free region a HAB invalid address failure event is generated. The maximum CSF size is defined in CONFIG_CSF_SIZE, reduce SPL size limit based on this configuration. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08tools: imx8mimage: fix HDMI/FIT parsingPeng Fan
Add missed break for HDMI entry. And moving FIT parsing earlier, because it does not have parameter, it will not runs into CFG_REG_SIZE. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-08kconfiglib: Update to the 12.14.0 releaseTom Rini
A large number of changes have happened upstream since our last sync which was to 375506d. The reason to do the upgrade at this point is for improved Python 3 support. As part of this upgrade we need to update moveconfig.py and genboardscfg.py the current API. This is: - Change "kconfiglib.Config" calls to "kconfiglib.Kconfig" - Change get_symbol() calls to syms.get(). - Change get_value() to str_value. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08genboardscfg.py: Remove "warnings" print sectionTom Rini
We tell kconfiglib to not print any warnings to us so drop this code as it will be unused. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08genboardscfg.py: Convert to Python 3Tom Rini
Convert this tool to requiring Python 3. The bulk of this is done with the 2to3 tool In addition, we need to use the '//' operator to have our division result return an int rather than a float and ensure that we use UTF-8 when reading/writing files. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08binman: Take account of skip-at-start with image-headerSimon Glass
The image-header currently sets it offset assuming that skip-at-start is zero. This does not work on x86 where offsets end at 4GB. Add in this value so that the offset is correct. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Handle reading data for end-at-4gb sectionsSimon Glass
Some x86 sections have special offsets which currently result in empty data being returned from the 'extract' command. Fix this by taking account of the skip-at-start property. Add a little more debugging while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Add a base implementation of Entry.ReadChildData()Simon Glass
At present this function is not present in the Entry base class so it is hard to find the documentation for it. Move the docs from the section class and expand it a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Allow verbose output with all commandsSimon Glass
At present the verbose flag only works for the 'build' command. This is not intended, nor is it useful. Update the code to support the verbose flag and make use of a command exception handler. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: rebase the patch against u-boot-x86/next to get it applied cleanly] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Allow selection of logging verbositySimon Glass
Support a new BINMAN_VERBOSE option to the build, to allow passing the -v flag to binman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-24fw_env: fix build errorPierre-Jean Texier
The following error appears: tools/env/fw_env.c:1149:25: error: lvalue required as unary ‘&’ operand rc = write(fd, &ENV_REDUND_OBSOLETE, sizeof(ENV_REDUND_OBSOLETE)); Fixes: d3716dd ("env: Rename the redundancy flags") Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Suggested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-24fw_env: remove duplicated definitionsPierre-Jean Texier
Since commit d3716dd ("env: Rename the redundancy flags"), the definitions of ENV_REDUND_OBSOLETE & ENV_REDUND_ACTIVE was moved to env.h. Fixes: tools/env/fw_env.c:122:22: error: ‘ENV_REDUND_ACTIVE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_ACTIVE = 1; ^~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:63:2: note: previous definition of ‘ENV_REDUND_ACTIVE’ was here ENV_REDUND_ACTIVE = 1, ^~~~~~~~~~~~~~~~~ tools/env/fw_env.c:127:22: error: ‘ENV_REDUND_OBSOLETE’ redeclared as different kind of symbol static unsigned char ENV_REDUND_OBSOLETE; ^~~~~~~~~~~~~~~~~~~ In file included from tools/env/fw_env.c:13: include/env.h:62:2: note: previous definition of ‘ENV_REDUND_OBSOLETE’ was here ENV_REDUND_OBSOLETE = 0, Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-10tools: Add ifwitool to .gitignoreAndy Shevchenko
Follow up fix to the commit 56bf4f863075 ("x86: Add ifwitool for Intel Integrated Firmware Image") in order to ignore created binary. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03riscv: tools: Handle addend to absolute reloc in prelink-riscvMarcus Comstedt
Previously the handling of R_RISCV_32 and R_RISCV_64 would simply insert the value of the symbol and ignore any addend. However, there exist relocs where the addend is non-zero: 0000000080250900 R_RISCV_64 efi_runtime_services+0x0000000000000068 0000000080250910 R_RISCV_64 efi_runtime_services+0x0000000000000038 0000000080250920 R_RISCV_64 efi_runtime_services+0x0000000000000018 0000000080250930 R_RISCV_64 efi_runtime_services+0x0000000000000020 0000000080250980 R_RISCV_64 efi_runtime_services+0x0000000000000048 0000000080250990 R_RISCV_64 efi_runtime_services+0x0000000000000050 00000000802509a0 R_RISCV_64 efi_runtime_services+0x0000000000000058 0000000080250940 R_RISCV_64 systab+0x0000000000000030 0000000080250950 R_RISCV_64 systab+0x0000000000000040 0000000080250960 R_RISCV_64 systab+0x0000000000000050 0000000080250970 R_RISCV_64 systab+0x0000000000000060 In these cases the addend needs to be added to the symbol value to get the correct value for the reloc. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com>
2019-08-26tools: remove easylogo and include/video_logo.hHeinrich Schuchardt
include/video_logo.h once was created via the tool easylogo and than used in cpu/mpc8xx/video.c to display Tux. video_logo.h has been replaced by include/linux_logo.h and is not needed anymore. Delete the include and the tool, Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-20easylogo: avoid buffer overrunHeinrich Schuchardt
Building easylogo with `HOST_TOOLS_ALL=y make tools` results in a build warning due to a possible buffer overrun: tools/easylogo/easylogo.c:453:4: note: ‘sprintf’ output between 7 and 262 bytes into a destination of size 256 sprintf (str, "%s, 0x%02x", app, *dataptr++); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Truncate the output to fit into the destination buffer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15riscv: tools: Add big endian target support to prelink-riscvMarcus Comstedt
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-08-15riscv: tools: Fix prelink-riscv to work on big endian hostsMarcus Comstedt
All ELF fields whose values are inspected by the code are converted to CPU byteorder first. Values which are copied verbatim (relocation fixups) are not swapped to CPU byteorder and back as it is not needed. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Rename the redundancy flagsSimon Glass
Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Rename environment to embedded_environmentSimon Glass
The name 'environment' is widely used in U-Boot so is not a very useful name of a variable. Rename it to better indicate its purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-30tools: zynqmp_psu_init_minimize.sh: fix return lines coding styleLuca Ceresoli
Remove unneeded parenthess around return value. E.g.: return (0); -> return 0; Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: add tool to minimize psu_init_gpl.c filesLuca Ceresoli
This script transforms a pair of psu_init_gpl.c and .h files produced by the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that is almost checkpatch compliant. Based on a script by Michal Simek. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: add tool to convert PMU config object .c to binaryLuca Ceresoli
The recently-added ZYNQMP_SPL_PM_CFG_OBJ_FILE option allows SPL to load a PMUFW configuration object from a binary blob. However the configuration object is produced by Xilinx proprietary tools as a C source file and no tool exists to easily convert it to a binary blob in an embedded Linux build system for U-Boot to use. Add a simple Python script to do the conversion. It is definitely not a complete C language parser, but it is enough to parse the known patterns generated by Xilinx tools, including: - defines - literal integers, optionally with a 'U' suffix - bitwise OR between them Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-29Merge tag 'dm-pull-29jul19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for replacing files
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29binman: Add command-line support for replacing entriesSimon Glass
Add a 'replace' command to binman to permit entries to be replaced, either individually or all at once (using a filter). Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-29binman: Correct the error message for invalid pathSimon Glass
At present this message references -o for output file. But binman uses -f now. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-29binman: Split control.WriteEntryToImage() into separate functionsSimon Glass
This code has three distinct phases: 1. The image is loaded and the state module is set up 2. The entry is written to the image 3. The image is repacked and written back to the file Split the code out with three separate functions, one for each phase. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-29binman: Update control.WriteEntry() to support writing the mapSimon Glass
Add the ability to write a new map file. Also tidy up a few comments and rename a misleading variable. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-28 14:05:50 +0000