summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-02Merge tag 'u-boot-rockchip-20191231' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix latest mainline kernel for rk3308 - Update rk3288-evb config to suport OP-TEE - Fix for firefly-px30 DEBUG_UART channel and make it standalone - Script make_fit_atf add python3 support - Fix rk3328 timer with correct COUNTER_FREQUENCY - Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02tools: .gitignore: add asn1_compilerDario Binacchi
Add the tool to the ignore list to prevent being marked as unversioned. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-27tools/imximage: share DCD information via KconfigJorge Ramirez-Ortiz
IMX based platforms can have the DCD table located on different addresses due to differences in their memory maps (ie iMX7ULP). This information is required by the user to sign the images for secure boot so continue making it accessible via mkimage. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-12-27rockchip: mkimage: fix wrong range of rc4 encoding for boot imageJeffy Chen
The rc4 encoding should cover spl header as well, and the file_size contains spl header too. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27rockchip: mkimage: support packing optional second level boot-loaderJeffy Chen
Support packing optional second level boot-loader: $ ./tools/mkimage -n rk3399 -T rksd -d \ rk3399_ddr_800MHz_v1.24.bin:rk3399_miniloader_v1.19.bin out -v Adding Image rk3399_ddr_800MHz_v1.24.bin Size 116492(pad to 116736) Adding Image rk3399_miniloader_v1.19.bin Size 88060(pad to 88064) Image Type: Rockchip RK33 (SD/MMC) boot image Init Data Size: 116736 bytes Boot Data Size: 88064 bytes Mainly parse init file and boot file from datafile option, copy them to the image with 2KB alignment. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-20fw_setenv: avoid writing environment when nothing has changedRasmus Villemoes
In the case where one deletes an already-non-existing variable, or sets a variable to the value it already has, there is no point in writing the environment back, thus reducing wear on the underlying storage device. In the case of redundant environments, if the two environments differ (e.g. because one is corrupt), make sure that any call of fw_setenv causes the two to become synchronized, even if the fw_setenv call does not change anything in the good copy. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-10buildman: Ignore blank lines during size checksTom Rini
Today when parsing the .sizes files we get a warning about an invalid line in the file as it's blank. Solve this by checking that we have a non-blank line prior to processing. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-10buildman: Add options to get the arch and toolchain infoSimon Glass
Sometimes it is useful for external tools to use buildman to provide the toolchain information. Add an -a option which shows the value to use for the ARCH environment variable, and -A which does the same for CROSS_COMPILE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10buildman: Figure out boards before commitsSimon Glass
At present buildman looks at toolchains, then commits and then boards. Move the board processing up above the commit processing, since it relates to the toolchain code. This will make it easier to check the toolchains needed for a board without processing commits first. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10buildman: Ask genboardscfg to be quietSimon Glass
Now that this tool has a 'quiet' flag, use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10genboardcfg: Support a quiet modeSimon Glass
We don't really need buildman to print this every time it runs. Add a flag to run quietly, that buildman can use. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10buildman: Improve [make-flags] section parser to allow quoted stringsCristian Ciocaltea
The parser responsible for the '[make-flags]' section in the '.buildman' settings file is currently not able to handle quoted strings, as given in the sample bellow: [make-flags] qemu_arm=HOSTCC="cc -isystem /add/include" HOSTLDFLAGS="-L/add/lib" This patch replaces the simple string splitter based on the <space> delimiter with a regex tokenizer that preserves spaces inside double quoted strings. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
2019-12-06cmd: add asn1_compilerAKASHI Takahiro
Imported from linux kernel v5.3: asn1.h without changes asn1_ber_bytecode.h without changes asn1_decoder.h without changes asn1_compiler.c without changes This host command will be used to create a ASN1 parser, for example, for pkcs7 messages or x509 certificates. More specifically, it will generate *byte code* which will be interpreted by asn1 decoder library. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc: Fix code style with crc functionsSimon Glass
Some of these have a space before the bracket. Drop it to fix the style. Add some missing function comments while here. Note that u32 and u8 cannot be used here since crc.h is included on the host side. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-23buildman: Fix problem with non-existent output directoriesTom Rini
Now that we have buildman telling genboards.cfg to use an output directory we need to ensure that it exists. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Fixes: bc750bca1246 ("tools: buildman: Honor output directory when generating boards.cfg") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-23moveconfig.py: Fix more Python3 UTF issuesTom Rini
With the move to using Python 3 for real, we encounter two different issues. First, the file include/video_font_data.h includes at least one UTF-16 character. Given that it does not include any CONFIG symbols it is easiest to just ignore this file. Next, we encounter similar problems with some dts/dtsi files that come from Linux. In this case it's easiest to simply ignore all dts/dtsi files as there will not be CONFIG symbols for us to migrate in them. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND checkTom Rini
We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it. We have one board where we can simply multiple CONFIG_ENV_SIZE by two for the same result. The other place where we could but were not previously using this is for where env_internal.h checks for if we should set ENV_IS_EMBEDDED. This seems like the most likely use, historically, of the variable, but it was not used. Add logic to check for this now. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-17Merge tag 'u-boot-rockchip-20191118' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip SoC: PX30, RK3308 - Add and migrate to use common dram driver: PX30, RK3328, RK3399 - Add rk3399 board Tinker-s support - Board config update for Rock960, Rockpro64
2019-11-17rockchip: mkimage: add support for RK3308Andy Yan
Usage: (1) tools/mkimage -n rk3308 -T rksd -d tpl/u-boot-tpl.bin idbloader.img (2) cat spl/u-boot-spl.bin >> idbloader.img (3) upgrade_tool wl 0x40 idbloader.img Note: When use ddr binary from rkbin as tpl, use it replace u-boot-tpl.bin in(1) Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: mkimage: add support for px30Kever Yang
Add the table entry for px30 socs. The px30 has 10K of sram available. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-14patman: fix coverletter cc list with nullsRobert Beckett
fixes: 8ab452d5877638a97e5bdd521d119403b70b45f5 When compiling list of cover letter cc addresses, using null as a separater, then encoding to utf-8 results in lots of "\x00" as separators. patman then doesnt understand that when it comes to repoting the list to send-email. Fix this by not encoding to utf-8, as done for the other patch files. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-14patman: fix some typos in commentsAnatolij Gustschin
s/Subprocress/Subprocess/ s/easiler/easier/ s/repositiory/repository/ s/rangem/range/ s/Retruns/Returns/ Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-12defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENTTom Rini
Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12Merge tag 'u-boot-imx-20191105' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191105 ------------------- i.MX8MN SoC support ROM API image download support i.MX8MM enet enabling
2019-11-11binman: tegra: Adjust symbol calculation depending on end-at-4gbSimon Glass
A recent change adjusted the symbol calculation to work on x86 but broke it for Tegra. In fact this is because they have different needs. On x86 devices the code is linked to a ROM address and the end-at-4gb property is used for the image. In this case there is no need to add the base address of the image, since the base address is already built into the offset and image-pos properties. On other devices we must add the base address since the offsets start at zero. In addition the base address is currently added to the 'offset' and 'size' values. It should in fact only be added to 'image-pos', since 'offset' is relative to its parent and 'size' is not actually an address. This code should have been adjusted when support for 'image-pos' and 'size' was added, but it was not. To correct these problems: - move the code that handles adding the base address to section.py, which can check the end-at-4gb property and which property (offset/size/image-pos) is being read - add the base address only when needed (only for image-pos and not if the image uses end-at-4gb) - add a note to the documentation - add a separate test to cover x86 behaviour Fixes: 15c981cc (binman: Correct symbol calculation with non-zero image base) Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2019-11-08tools/img2brec.sh: Delete unused toolTom Rini
This script was only used on the MX1ADS board (and possibly other MX1 platforms) to program the flash. As we no longer have any boards for that SoC, remove this tool. Fixes: e570aca9474b ("mx1ads: remove board support") Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-05tools: imx8m_image: support ddr4 firmwarePeng Fan
some boards use ddr4, not lpddr4, so we need to check ddr4 firmware. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05tools: imx8mimage: add ROM VERSIONPeng Fan
The IVT offset is changed on i.MX8MN. Use ROM_VERSION to pass the v1 or v2 to mkimage. v1 is for iMX8MQ and iMX8MM v2 is for iMX8M Nano (iMX8MN) Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-04binman: Move to use Python 3Simon Glass
Update this tool to use Python 3 to meet the 2020 deadline. Unfortunately this introduces a test failure due to a problem in pylibfdt on Python 3. I will investigate. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04dtoc: Convert fdt.py to Python 3Simon Glass
Drop the now-unused Python 2 code to keep code coverage at 100%. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Convert a few tests to Python 3Simon Glass
Some tests have crept in with Python 2 strings and constructs. Convert then. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04binman: Remember the pre-reset entry sizeSimon Glass
When preparing to possible expand or contract an entry we reset the size to the original value from the binman device-tree definition, which is often None. This causes binman to forget the original size of the entry. Remember this so that it can be used when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04pylibfdt: Convert to Python 3Simon Glass
Build this swig module with Python 3. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04rkmux: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04move_config: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04microcode_tool: Convert to Python 3Simon Glass
Convert this tool to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04test_dtoc: Move to use Python 3Simon Glass
Update this test to use Python 3 to meet the 2020 deadline. Also make it executable while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04test_fdt: Move to use Python 3Simon Glass
Update this test to use Python 3 to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04buildman: Convert to Python 3Simon Glass
Convert buildman to Python 3 and make it use that, to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Move to use Python 3Simon Glass
Update this tool to use Python 3 to meet the 2020 deadline. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Use unicode for file I/OSimon Glass
At present patman test fail in some environments which don't use utf-8 as the default file encoding. Add this explicitly. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04patman: Adjust 'command' to return strings instead of bytesSimon Glass
At present all the 'command' methods return bytes. Most of the time we actually want strings, so change this. We still need to keep the internal representation as bytes since otherwise unicode strings might break over a read() boundary (e.g. 4KB), causing errors. But we can convert the end result to strings. Add a 'binary' parameter to cover the few cases where bytes are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04fdt: Sync up to the latest libfdtSimon Glass
Bring over the fdt from this commit: 430419c (origin/master) tests: fix some python warnings adding in the 'assumptions' series designed to reduce code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-02binman: Fix up comment in intel-fsp-mSimon Glass
This comment references the wrong FSP component. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-02binman: Add support for Intel FSP-TSimon Glass
This entry is used to hold an Intel FSP-T (Firmware Support Package Temp-RAM init) binary. Add support for this in binman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-02binman: Add support for Intel FSP-SSimon Glass
This entry is used to hold an Intel FSP-S (Firmware Support Package Silicon init) binary. Add support for this in binman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-02binman: Correct symbol calculation with non-zero image baseSimon Glass
At present binman adds the image base address to the symbol value before it writes it to the binary. This is not correct since the symbol value itself (e.g. image position) has no relationship to the image base. Fix this and update the tests to cover this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-28 16:20:11 +0000