summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2018-11-28tools: MediaTek: add MTK boot header generation to mkimageRyder Lee
This patch adds support for MTK boot image generation. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-26tools/file2include: don't use malloc.h for mallocJonathan Gray
stdlib.h is the header for malloc since at least c89/c90. Previously this would fail to build on OpenBSD and fallback to the wrong header: In file included from u-boot/tools/file2include.c:21: u-boot/include/malloc.h:875:5: error: function-like macro 'CONFIG_IS_ENABLED' is not defined Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-11-26tools: .gitignore: add prelink-riscvLukas Auer
Ignore tools/prelink-riscv. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-20binman: Set the pathname correctly for ELF filesSimon Glass
At present, stripped files don't have the right pathname which means that blob compression cannot be used. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20binman: Drop an unnecessary comma in blob handlingSimon Glass
This comma is not needed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20binman: Add a way to enable debugging from the buildSimon Glass
When the build fails due to something wrong in binman it is sometimes useful to get a full backtrace showing the location of the failure. Add a BINMAN_DEBUG environment variable to support this along with some documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20buildman: Show boards with warning with w+Simon Glass
At present we should boards with warnings in the same way as those with errors. This is not ideal. Add a new 'warn' state and show these listed in yellow to match the actual warning lines printing with -e. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20buildman: Rename the good, better, worse variablesSimon Glass
At present we don't distinguish between errors and warnings when printing the architecture summary. Rename the variables to better describe their purpose. 'Worse' at present means we got an error, so use that as the name. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20buildman: Detect dtc warningsSimon Glass
At present messages from the device-tree compiler like this: arch/arm/dts/socfpga_arria10_socdk_sdmmc.dtb: Warning (avoid_unnecessary_addr_size): /clocks: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property are detected as errors since they don't match the gcc warning regex. Add a new one for dtc to fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20buildman: Only print toolchain probing with -vSimon Glass
At present --list-tool-chains prints a lot of information about the toolchain-probing process. This is generally not very interesting. Update buildman to print this only if --list-tool-chains is given with -v. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16armv7R: K3: am654: Add support for generating build targetsLokesh Vutla
Update Makefiles to generate: - tiboot3.bin: Image format that can be processed by ROM. Below is the tiboot3.bin image format that is required by ROM: _______________________ | X509 | | Certificate | | ____________________ | | | | | | | u-boot-spl.bin | | | | | | | |___________________| | |_______________________| Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-14buildman: Add a --boards option to specify particular boards to buildSimon Glass
At present 'buildman sandbox' will build all 5 boards for the sandbox architecture rather than the single board 'sandbox'. The only current way to exclude sandbox_spl, sandbox_noblk, etc. is to use -x which is a bit clumbsy. Add a --boards option to allow individual build targets to be specified. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-06tools: imx8image: flatten container header only when creating containerPeng Fan
If there is no CONTAINER entry, there is no need to flatten container header. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-06tools: imx8image: fix coverity CID 184233Peng Fan
Fix: CID 184233: (NEGATIVE_RETURNS) Using variable "container" as an index to array "imx_header.fhdr". Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-06tools: imx8image: fix coverity CID 184234Peng Fan
Fix: CID 184234: (TAINTED_SCALAR) Using tainted variable "header.num_images - 1" as an index into an array "header.img". Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-06tools: imx8image: check lseek return valuePeng Fan
Check lseek return value. Fix Coverity CID: 184236 184235 184232 Reported-by: Coverity Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2018-11-02MIPS: make size of relocation table fixed but configurableDaniel Schwierzeck
Currently the size of the relocation table will be shrunk to the actual size needed. Although this gives a maximal space saving, it messes up the _end symbol. This breaks features like appended DTBs because the _end symbol doesn't point to the real end of the U-Boot binary. Remove the size shrinking and make the size of the relocation table fixed but configurable. This follows the Linux approach and the user can adjust the size to his needs. Also rename the relocation table section from .rel to .data.reloc to follow the Linux approach and to avoid ambiguities with the .rel.* sections added by the linker. Reported-by: Lars Povlsen <lars.povlsen@microsemi.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-10-25Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imxTom Rini
Merged imx8 architecture, fix build for imx8 + warnings
2018-10-25imx: mkimage: avoid stop CI when required files not existsPeng Fan
Introduce a new script to check whether file exists and use that check in Makefile to avoid break CI system. The script return 1 when the required files not exists, return 0 when files exists. The script will ignore check to u-boot-dtb.bin, because if there is something wrong to generate u-boot-dtb.bin, there must be some code error. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22binman: Add a test for Intel reference codeSimon Glass
Unfortunately the test was not included in the original implementation. Add one. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-22tools: add i.MX8/8X image supportPeng Fan
i.MX8/8X bootable image type is container type. The bootable image, containers a container set which supports two container. The 1st container is for SECO firmware, the 2nd container needs to include scfw, m4_0/1 image, ACore images per your requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22binman: Add support for Intel reference codeSimon Glass
Some platforms use this instead of FSP to set up the platform, including memory. Add support for this in binman. This is needed for chromebook_samus, for example. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-09dtoc: Fix the value of SetInt()Simon Glass
This does not set the correct value at present. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09binman: Move to three-digit test-file numbersSimon Glass
We now have 99 tests. Before adding any more, rename everything to three digits. This helps to preserve the ordering of tests and makes it easier to find things. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08binman: Run tests concurrentlySimon Glass
At present the tests run one after the other using a single CPU. This is not very efficient. Bring in the concurrencytest module and run the tests concurrently, using one process for each CPU by default. A -P option allows this to be overridden, which is necessary for code-coverage to function correctly. This requires fixing a few tests which are currently not fully independent. At some point we might consider doing this across all pytests in U-Boot. There is a pytest version that supports specifying the number of processes to use, but it did not work for me. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08patman: Don't clear progress in tout unless it was usedSimon Glass
At present calling Uninit() always called ClearProgress() which outputs a \r character as well as spaces to remove any progress information on the line. This can mess up the normal output of binman and other tools. Fix this by outputing this only when progress information has actually been previous written. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08tools: Set an initial value for indirSimon Glass
This variable is not documented or set up in the module. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08buildman: dtoc: Suppress unwanted output from testSimon Glass
There are a few test cases which print output. Suppress this so that tests can run silently in the normal case. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08binman: Separate out testSplBssPad()Simon Glass
At present this test runs binman twice, which means that the temporary files from the first run do not get cleaned up. Split this into two tests to fix this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08binman: Fix up removal of temporary directoriesSimon Glass
At present 'make check' leaves some temporary directories around. Part of this is because we call tools.PrepareOutputDir() twice in some cases, without calling tools.FinaliseOutputDir() in between. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08binman: Add a default path to libfdt.pySimon Glass
This module is often available in the sandbox_spl build created by 'make check'. Use this as a default path so that just typing 'binman -t' (without setting PYTHONPATH) will generally run the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08buildman: Make the toolchain test more forgivingSimon Glass
The filenames of the toolchains on kernel.org changes every now and then. Fix it for the current change, and make the test use a regex so that it has a better chance of passing with future changes too. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08patman: Handle unicode in _ProjectConfigParser testsSimon Glass
With Python 2.7.15rc1, ConfigParser.SafeConfigParser has unfortunately started returning unicode, for unknown reasons. Adjust the code to handle this by converting everything to unicode. We cannot convert things to ASCII since email addresses may be encoded with UTF-8. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-10-04rockchip: Fix rkimage format for SPL boot over USBDaniel Gröber
The 'rkimage' format used for booting rockchip boards over USB seems to have been broken since commit 7bf274b9caab ("rockchip: mkimage: use imagename to select spl hdr & spl size"). That commit adds an offset of RK_SPL_HDR_START(=2048) to the location the 'RKxx' header is written at. However the bootrom expects this header to be the first four bytes of the image, not at offset 2048. This appears to have been a copy paste error since the 'rksd' and 'rkspi' image types do require this offset. Furthermore commit 111bcc4fb6cb ("rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399"), commit 3d54eabcafec9 ("rockchip: spl: RK3399: use boot0 hook to create space for SPL magic") and commit 308277569229 ("rockchip: mkimage: update rkimage to support pre-padded payloads") changed the way the space for the 'RKxx' header is allocated and written to the image without adjusting 'rkimage'. This commit fixes those mistakes and makes it possible to load u-boot SPL over USB once more. (Tested on RK3399) Signed-off-by: Daniel Gröber <daniel@dps.uibk.ac.at> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-03tools: socfpga: fix sfp_verify_headerAtsushi Nemoto
Fix sfp_verify_header to return correct version number. This fixes "Not a sane SOCFPGA preloader" error message with v1 header. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
2018-09-30Merge git://git.denx.de/u-boot-dmTom Rini
2018-09-29buildman: Avoid hanging when the config changesSimon Glass
Something has changed in the last several month such that when buildman builds U-Boot incrementally and a new CONFIG option has been added to the Kconfig, the build hanges waiting for input: Test new config (NEW_CONFIG) [N/y/?] (NEW) Since binamn does not connect the build's stdin to anything this waits on stdin to the build thread, which never comes. Eventually I suspect all the threads end up in this state and the build does not progress. Fix this by passing /dev/null as input to the build. That way, if there is a new CONFIG, the build will stop (and fail): Test new config (NEW_CONFIG) [N/y/?] (NEW) Error in reading or end of file. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Allow writing a map file when something goes wrongSimon Glass
When we get a problem like overlapping regions it is sometimes hard to figure what what is going on. At present we don't write the map file in this case. However the file does provide useful information. Catch any packing errors and write a map file (if enabled with -m) to aid debugging. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support ELF files for U-Boot and SPLSimon Glass
For sandbox we want to put ELF files in the image since that is what we need to execute. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Correct fmap output on x86Simon Glass
Normally x86 platforms use the end-at-4gb option. This currently produces an FMAP with positions which have a large offset. The use of end-at-4gb is a useful convenience within binman, but we don't really want to export a map with these offsets. Fix this by subtracting the 'skip at start' parameter. Also put the code which convers names to fmap format, for clarity. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Record the parent section of each sectionSimon Glass
At present sections have no record of their parent so it is not possible to traverse up the tree to the root and figure out the position of a section within the image. Change the constructor to record this information. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support x86 microcode in TPLSimon Glass
When TPL is used on x86 we may want to program the microcode (at least for the first CPU) early in boot. Add support for this by refactoring the existing code to be more generic. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support hashing entriesSimon Glass
Sometimesi it us useful to be able to verify the content of entries with a hash. Add an easy way to do this in binman. The hash information can be retrieved from the device tree at run time. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Mention section attributes in docsSimon Glass
Images and sections have the same attributes, since an image is mostly just a top-level section. Update the docs to explain this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support expanding entriesSimon Glass
It is useful to have entries which can grow automatically to fill available space. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support adding filesSimon Glass
In some cases it is useful to add a group of files to the image and be able to access them at run-time. Of course it is possible to generate the binman config file with a set of blobs each with a filename. But for convenience, add an entry type which can do this. Add required support (for adding nodes and string properties) into the state module. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Allow zero-size sectionsSimon Glass
At present if there is only a zero-size entry in a section this is reported as an error, e.g.: Offset 0x0 (0) is outside the section starting at 0x0 (0) Adjust the logic in CheckEntries() to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29binman: Support compressed entriesSimon Glass
Add support for compressing blob entries. This can help reduce image sizes for many types of data. It requires that the firmware be able to decompress the data at run-time. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-28patman: Detect missing tools and report themSimon Glass
When tools are needed but not present, at present we just get an error which can be confusing for the user. Try to be helpful by reporting the tool as missing and suggesting a possible remedy. Also update the Run() method to support this. Signed-off-by: Simon Glass <sjg@chromium.org>