From 1189bd513ca376a0f1b357bb0ffec7ae22ace717 Mon Sep 17 00:00:00 2001 From: Denis Pynkin Date: Tue, 15 Sep 2020 14:37:14 +0300 Subject: mx6qsabrelite: increase the environment offset The size of the binary created with the default U-boot config is much greater than the default offset for environment `0x60000`. In case if that binary is used for booting via MMC it is overlapped with the environment stored on MMC. This leads to U-Boot corruption while saving environment with `saveenv` command and non-bootable SabreLite board. The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in commit a09fea1 but did not count in the change to `0xC0000` if option `CONFIG_ENV_IS_IN_MMC` is used. The offset is also used for variant with environment saving onto SPI NOR flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the U-Boot binary flashed on SPI NOR is also corrupted after environment saving with the original 0x60000 offset. Signed-off-by: Denis Pynkin Reviewed-by: Tom Rini --- configs/mx6qsabrelite_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 008fcfe04c..6e7193e411 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -4,7 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 +CONFIG_ENV_OFFSET=0xC0000 CONFIG_MX6Q=y CONFIG_TARGET_NITROGEN6X=y CONFIG_DM_GPIO=y -- cgit