From 45d6e677106703139d2e3c10fa2d1168fb25309e Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 8 Sep 2014 14:08:45 +0200 Subject: arm: socfpga: misc: Add proper ethernet initialization Add function to initialize the EMAC blocks upon board startup. The preprocessor guards against building on SoCFPGA-VT and against SPL build are not needed as those are handled implicitly via both SPL framework and the socfpga_cyclone5.h config file, which will not define CONFIG_DESIGNWARE_ETH if building for SoCFPGA-VT. We cannot handle two EMAC ethernet blocks yet, therefore the ifdefs. Once there is hardware using both EMAC blocks, this ifdef will have to go. Signed-off-by: Pavel Machek Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Albert Aribaud Cc: Tom Rini Cc: Wolfgang Denk Cc: Pavel Machek --- arch/arm/cpu/armv7/socfpga/misc.c | 58 ++++++++++++++++------ arch/arm/include/asm/arch-socfpga/system_manager.h | 9 ++++ 2 files changed, 52 insertions(+), 15 deletions(-) diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index b633615208..872ea59c64 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -9,15 +9,58 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; +static struct socfpga_system_manager *sysmgr_regs = + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; + int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } +/* + * DesignWare Ethernet initialization + */ +#ifdef CONFIG_DESIGNWARE_ETH +int cpu_eth_init(bd_t *bis) +{ +#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS + const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; +#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS + const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; +#else +#error "Incorrect CONFIG_EMAC_BASE value!" +#endif + + /* Initialize EMAC. This needs to be done at least once per boot. */ + + /* + * Putting the EMAC controller to reset when configuring the PHY + * interface select at System Manager + */ + socfpga_emac_reset(1); + + /* Clearing emac0 PHY interface select to 0 */ + clrbits_le32(&sysmgr_regs->emacgrp_ctrl, + SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift); + + /* configure to PHY interface select choosed */ + setbits_le32(&sysmgr_regs->emacgrp_ctrl, + SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift); + + /* Release the EMAC controller from reset */ + socfpga_emac_reset(0); + + /* initialize and register the emac */ + return designware_initialize(CONFIG_EMAC_BASE, + CONFIG_PHY_INTERFACE_MODE); +} +#endif + #if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information @@ -54,18 +97,3 @@ int misc_init_r(void) { return 0; } - - -/* - * DesignWare Ethernet initialization - */ -int cpu_eth_init(bd_t *bis) -{ -#if !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) && !defined(CONFIG_SPL_BUILD) - /* initialize and register the emac */ - return designware_initialize(CONFIG_EMAC_BASE, - CONFIG_PHY_INTERFACE_MODE); -#else - return 0; -#endif -} diff --git a/arch/arm/include/asm/arch-socfpga/system_manager.h b/arch/arm/include/asm/arch-socfpga/system_manager.h index 90d27201d0..071ec4f266 100644 --- a/arch/arm/include/asm/arch-socfpga/system_manager.h +++ b/arch/arm/include/asm/arch-socfpga/system_manager.h @@ -134,4 +134,13 @@ struct socfpga_system_manager { #define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \ ((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38)) +/* EMAC Group Bit definitions */ +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 + +#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0 +#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3 + #endif /* _SYSTEM_MANAGER_H_ */ -- cgit