From 464c988a1dd5356b84a375539d1a8d42c518a2db Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 22 Sep 2017 23:45:33 -0300 Subject: colibri_imx6: Avoid calling setup_display() from SPL code There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic Signed-off-by: Fabio Estevam --- board/toradex/colibri_imx6/colibri_imx6.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 756e3f39df..a2a421444b 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -630,9 +630,6 @@ int board_early_init_f(void) ARRAY_SIZE(pwr_intb_pads)); setup_iomux_uart(); -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif return 0; } @@ -653,6 +650,10 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + #ifdef CONFIG_TDX_CMD_IMX_MFGR (void) pmic_init(); #endif -- cgit