From a2559f113cd43ef46bcebf79bbc35158af9e7260 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 8 Apr 2015 12:55:01 -0700 Subject: imx: ventana: use hdmiinfmt env var to override HDMI capture format The HDMI receiver used on the GW54xx and GW551x has a 16bit video data bus interconnect between it and the IMX6 CSI. This can be used in two different modes, each having advantages and disadvantages. Allow the hdmiinfmt env var to specify which format is desired (yuv422smp or yuv422bt656). Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 39 +++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 50a2a9adf0..e6da3d515a 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1580,6 +1580,42 @@ int misc_init_r(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +static int ft_sethdmiinfmt(void *blob, char *mode) +{ + int off; + + if (!mode) + return -EINVAL; + + off = fdt_node_offset_by_compatible(blob, -1, "nxp,tda1997x"); + if (off < 0) + return off; + + if (0 == strcasecmp(mode, "yuv422bt656")) { + u8 cfg[] = { 0x00, 0x00, 0x00, 0x82, 0x81, 0x00, + 0x00, 0x00, 0x00 }; + mode = "422_ccir"; + fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1); + fdt_setprop_u32(blob, off, "vidout_trc", 1); + fdt_setprop_u32(blob, off, "vidout_blc", 1); + fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg)); + printf(" set HDMI input mode to %s\n", mode); + } else if (0 == strcasecmp(mode, "yuv422smp")) { + u8 cfg[] = { 0x00, 0x00, 0x00, 0x88, 0x87, 0x00, + 0x82, 0x81, 0x00 }; + mode = "422_smp"; + fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1); + fdt_setprop_u32(blob, off, "vidout_trc", 0); + fdt_setprop_u32(blob, off, "vidout_blc", 0); + fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg)); + printf(" set HDMI input mode to %s\n", mode); + } else { + return -EINVAL; + } + + return 0; +} + /* * called prior to booting kernel or by 'fdt boardsetup' command * @@ -1640,6 +1676,9 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_setprop(blob, 0, "board", info->model, strlen((const char *)info->model) + 1); + /* set desired digital video capture format */ + ft_sethdmiinfmt(blob, getenv("hdmiinfmt")); + /* * disable serial2 node for GW54xx for compatibility with older * 3.10.x kernel that improperly had this node enabled in the DT -- cgit