From a847fff11cc4f3745d0087d45d2e5964c47f55d2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 25 Nov 2014 13:11:08 -0200 Subject: mxc_ocotp: Do not disable the OCOTP clock after every access MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Leave the OCOTP turned on, so that we subsequent access do not fail. After enabling the thermal driver on a mx6sxsabresd board: U-Boot 2015.01-rc1-18267-g99d4189-dirty (Nov 24 2014 - 12:59:01) CPU: Freescale i.MX6SX rev1.0 at 792 MHz CPU: Temperature 48 C Reset cause: POR Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller In: serial Out: serial Err: serial Net: (hang) As the thermal driver accesses the ocotp registers, its clock will be disabled afterwards. Then when the MAC address is read (also from ocotp registers) it will cause a hang. Do not disable the ocotp clock to prevent this problem. Signed-off-by: Fabio Estevam Reviewed-by: Benoît Thébaudeau --- drivers/misc/mxc_ocotp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index 89737af9b7..d92044eeda 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -81,8 +81,6 @@ static int finish_access(struct ocotp_regs *regs, const char *caller) err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); clear_error(regs); - enable_ocotp_clk(0); - if (err) { printf("mxc_ocotp %s(): Access protect error\n", caller); return -EIO; -- cgit