From c8434ccaceb987babfc925fe86db473a44352cf4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 8 Sep 2015 14:43:09 -0300 Subject: thermal: imx_thermal: Do not print on error It is not very useful to have the message below on every boot (especially when we are using early silicon): U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device , so turn the error message into debug level. Signed-off-by: Fabio Estevam --- drivers/thermal/imx_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index ca35be837b..09a3c52680 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -232,7 +232,7 @@ static int imx_thermal_probe(struct udevice *dev) if (is_soc_type(MXC_SOC_MX6)) { /* Check for valid fuse */ if (fuse == 0 || fuse == ~0) { - printf("CPU: Thermal invalid data, fuse: 0x%x\n", + debug("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); return -EPERM; } -- cgit