From cee7470cd8a386802e38c6bde8ce62fbc8218a86 Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Tue, 10 Oct 2017 16:21:02 +0200 Subject: rockchip: boot0: align to 0x20 for armv7 '_start' The '_start' is using as vector table base address, and will write to VBAR register, so it needs to be aligned to 0x20 for armv7. Signed-off-by: Kever Yang [Updated to current code base:] Signed-off-by: Philipp Tomsich --- arch/arm/include/asm/arch-rockchip/boot0.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 455d8428d8..f7c614669c 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -6,12 +6,13 @@ /* * Execution starts on the instruction following this 4-byte header - * (containing the magic 'RK33'). + * (containing the magic 'RK30', 'RK31', 'RK32' or 'RK33'). This + * magic constant will be written into the final image by the rkimage + * tool, but we need to reserve space for it here. * * To make life easier for everyone, we build the SPL binary with * space for this 4-byte header already included in the binary. */ - #ifdef CONFIG_SPL_BUILD /* * We need to add 4 bytes of space for the 'RK33' at the @@ -26,6 +27,15 @@ b reset /* may be overwritten --- should be 'nop' or a 'b reset' */ #endif b reset +#if !defined(CONFIG_ARM64) + /* + * For armv7, the addr '_start' will used as vector start address + * and write to VBAR register, which needs to aligned to 0x20. + */ + .align(5) +_start: + ARM_VECTORS +#endif #if defined(CONFIG_ROCKCHIP_RK3399) && defined(CONFIG_SPL_BUILD) .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ -- cgit