From f9c3a816c0de61565a0afd1608de20ecb54e9243 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 1 Sep 2020 15:34:06 +0800 Subject: mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate. Currently, after config the clock rate, delay 10ms, this is quite a rough method. Check the clock stable status in the present status register is enough. Tested-by: Ji Luo Signed-off-by: Haibo Chen --- drivers/mmc/fsl_esdhc_imx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 788677984b..0c866b168f 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -36,6 +36,7 @@ #include #include #include +#include #if !CONFIG_IS_ENABLED(BLK) #include "mmc_private.h" @@ -631,6 +632,8 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) { struct fsl_esdhc *regs = priv->esdhc_regs; int div = 1; + u32 tmp; + int ret; #ifdef ARCH_MXC #ifdef CONFIG_MX53 /* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ @@ -664,7 +667,9 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock) esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk); - udelay(10000); + ret = readx_poll_timeout(esdhc_read32, ®s->prsstat, tmp, tmp & PRSSTAT_SDSTB, 100); + if (ret) + pr_warn("fsl_esdhc_imx: Internal clock never stabilised.\n"); #ifdef CONFIG_FSL_USDHC esdhc_setbits32(®s->vendorspec, VENDORSPEC_PEREN | VENDORSPEC_CKEN); -- cgit