From 89ebc82137bebb11a8191f8b9cbf08f2533ae8bc Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Wed, 4 Mar 2015 13:13:03 +0100 Subject: ARM: mx6: move to a standard arch/board approach Freescale boards are currently all defined in arch/arm/Kconfig, which makes them hard to detect. Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently done via the SYS_EXTRA_OPTIONS option which marked as deprecated. Move to a more standard way to select sub-architecture and board by creating a Kconfig under arch/arm/cpu/armv7/mx6 and a new ARCH_MX6 option. Existing MX6 board definitions should be moved in this new Kconfig in choice menu, and new boards should be directly declared in this menu. Signed-off-by: Boris Brezillon --- arch/arm/cpu/armv7/mx6/Kconfig | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 arch/arm/cpu/armv7/mx6/Kconfig (limited to 'arch/arm/cpu/armv7/mx6') diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig new file mode 100644 index 0000000000..a32fd878f6 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -0,0 +1,31 @@ +if ARCH_MX6 + +config MX6 + bool + default y + +config MX6D + bool + +config MX6DL + bool + +config MX6Q + bool + +config MX6QDL + bool + +config MX6S + bool + +config MX6SL + bool + +config MX6SX + bool + +config SYS_SOC + default "mx6" + +endif -- cgit From 058d23168752c2a2ec0a6c3b50296cb5b91ec6d0 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Wed, 4 Mar 2015 13:13:05 +0100 Subject: board/seco: Add mx6q-uq7 basic board support Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported). It also adds a Kconfig skeleton to later add more SECO board (supporting SoC and board variants). Signed-off-by: Boris Brezillon --- arch/arm/cpu/armv7/mx6/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm/cpu/armv7/mx6') diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index a32fd878f6..076ba520c6 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -25,7 +25,18 @@ config MX6SL config MX6SX bool +choice + prompt "MX6 board select" + +config TARGET_SECOMX6 + bool "Support secomx6 boards" + select CPU_V7 + +endchoice + config SYS_SOC default "mx6" +source "board/seco/Kconfig" + endif -- cgit