From 16678eb40f287067dd8ad5a4e5208fbfe94e0e76 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 4 Nov 2013 14:05:00 +0100 Subject: arm, am33x: make RTC32K OSC enable configurable As http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast states: "Initialize devices only when they are needed within U-Boot" enable the RTC32K OSC only, if CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is enabled. Enable this in ti_am335x_common.h, so all boards in mainline should work as before. Signed-off-by: Heiko Schocher Cc: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/cpu/armv7') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 453effa541..803aa9c545 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -149,6 +149,7 @@ __weak void am33xx_spl_board_init(void) do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); } +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) static void rtc32k_enable(void) { struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE; @@ -164,6 +165,7 @@ static void rtc32k_enable(void) /* Enable the RTC 32K OSC by setting bits 3 and 6. */ writel((1 << 3) | (1 << 6), &rtc->osc); } +#endif static void uart_soft_reset(void) { @@ -232,8 +234,10 @@ void s_init(void) #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) prcm_init(); set_mux_conf_regs(); +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) /* Enable RTC32K clock */ rtc32k_enable(); +#endif sdram_init(); #endif } -- cgit