From 48255f52764b64f35a268e4e87f2c3a621741836 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 15 Aug 2016 09:41:36 +0200 Subject: ARM64: zynqmp: Add support for USB ulpi phy reset via mode pins Mode pins can be used as output for reset. Xilinx boards are using this feature as additional way how to reset USB phys and also others chips on the boards. Mode1 is used on all these boards for this feature. Let SPL toggle reset on this pin by default. Signed-off-by: Michal Simek --- arch/arm/cpu/armv8/zynqmp/spl.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm/cpu/armv8') diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c index 3ad5de1408..552f577b95 100644 --- a/arch/arm/cpu/armv8/zynqmp/spl.c +++ b/arch/arm/cpu/armv8/zynqmp/spl.c @@ -35,10 +35,33 @@ void board_init_f(ulong dummy) board_init_r(NULL, 0); } +static void ps_mode_reset(ulong mode) +{ + writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT | + mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT, + &crlapb_base->boot_pin_ctrl); + udelay(1); + writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT, + &crlapb_base->boot_pin_ctrl); + udelay(5); + writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT | + mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT, + &crlapb_base->boot_pin_ctrl); +} + +/* + * Set default PS_MODE1 which is used for USB ULPI phy reset + * Also other resets can be connected to this certain pin + */ +#ifndef MODE_RESET +# define MODE_RESET PS_MODE1 +#endif + #ifdef CONFIG_SPL_BOARD_INIT void spl_board_init(void) { preloader_console_init(); + ps_mode_reset(MODE_RESET); board_init(); } #endif -- cgit