From a69e037e46f028f5baafc4b3740e21bcadd5a33d Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 6 Nov 2014 20:16:42 +0900 Subject: ARM: UniPhier: move DDR related configuration to Kconfig Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/Kconfig | 23 +++++++++++++++++++++++ arch/arm/cpu/armv7/uniphier/dram_init.c | 2 +- arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 3 +-- arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c | 4 ---- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 3 +-- arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 4 ---- arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 3 +-- arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c | 4 ---- 8 files changed, 27 insertions(+), 19 deletions(-) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index f013dc3cad..011c6d9f2d 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -32,4 +32,27 @@ config CMD_PINMON The boot mode pins are latched when the system reset is deasserted and determine which device the system should load a boot image from. +config DRAM_INIT + bool + default SPL_BUILD + +choice + prompt "DDR3 Frequency select" + depends on DRAM_INIT + +config DDR_FREQ_1600 + bool "DDR3 1600" + depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + +config DDR_FREQ_1333 + bool "DDR3 1333" + depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + +endchoice + +config DDR_FREQ + int + default 1333 if DDR_FREQ_1333 + default 1600 if DDR_FREQ_1600 + endmenu diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c index 5465a0e6bf..7de657b7af 100644 --- a/arch/arm/cpu/armv7/uniphier/dram_init.c +++ b/arch/arm/cpu/armv7/uniphier/dram_init.c @@ -16,7 +16,7 @@ int dram_init(void) DECLARE_GLOBAL_DATA_PTR; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#ifdef CONFIG_DRAM_INIT led_write(B, 4, , ); { diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index 781b511a97..5722ee2928 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -7,5 +7,4 @@ obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c index 1344ac1caa..ebcbaabf65 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c @@ -149,10 +149,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 && CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR Frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index e11f4f6d8b..25a12027ff 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -7,5 +7,4 @@ obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c index dd462875bb..328b2f4d9a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c @@ -122,10 +122,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR frequency. -#endif - #if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index 781b511a97..5722ee2928 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -7,5 +7,4 @@ obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c index ff2dcb1640..a44f999fbf 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c @@ -129,10 +129,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 -#error Unsupported DDR frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -- cgit