From c2dd0d45540397704de9b13287417d21049d34c6 Mon Sep 17 00:00:00 2001
From: Aneesh V <aneesh@ti.com>
Date: Thu, 16 Jun 2011 23:30:49 +0000
Subject: armv7: integrate cache maintenance support

- Enable I-cache on bootup
- Enable MMU and D-cache immediately after relocation
	- Do necessary initialization before enabling d-cache and MMU
- Changes to cleanup_before_linux()
	- Make changes according to the new framework

Signed-off-by: Aneesh V <aneesh@ti.com>
---
 arch/arm/cpu/armv7/cpu.c   | 47 +++++++++++++++++++++-------------------------
 arch/arm/cpu/armv7/start.S | 18 +++++++++++++++++-
 2 files changed, 38 insertions(+), 27 deletions(-)

(limited to 'arch/arm/cpu')

diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index bc4238f6d8..def9ced64f 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -35,13 +35,10 @@
 #include <command.h>
 #include <asm/system.h>
 #include <asm/cache.h>
-
-static void cache_flush(void);
+#include <asm/armv7.h>
 
 int cleanup_before_linux(void)
 {
-	unsigned int i;
-
 	/*
 	 * this function is called just before we call linux
 	 * it prepares the processor for linux
@@ -50,31 +47,29 @@ int cleanup_before_linux(void)
 	 */
 	disable_interrupts();
 
-	/* turn off I/D-cache */
+	/*
+	 * Turn off I-cache and invalidate it
+	 */
 	icache_disable();
-	dcache_disable();
-
-	/* invalidate I-cache */
-	cache_flush();
+	invalidate_icache_all();
 
-#ifndef CONFIG_L2_OFF
-	/* turn off L2 cache */
-	l2_cache_disable();
-	/* invalidate L2 cache also */
-	invalidate_dcache(get_device_type());
-#endif
-	i = 0;
-	/* mem barrier to sync up things */
-	asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i));
+	/*
+	 * turn off D-cache
+	 * dcache_disable() in turn flushes the d-cache and disables MMU
+	 */
+	dcache_disable();
 
-#ifndef CONFIG_L2_OFF
-	l2_cache_enable();
-#endif
+	/*
+	 * After D-cache is flushed and before it is disabled there may
+	 * be some new valid entries brought into the cache. We are sure
+	 * that these lines are not dirty and will not affect our execution.
+	 * (because unwinding the call-stack and setting a bit in CP15 SCTRL
+	 * is all we did during this. We have not pushed anything on to the
+	 * stack. Neither have we affected any static data)
+	 * So just invalidate the entire d-cache again to avoid coherency
+	 * problems for kernel
+	 */
+	invalidate_dcache_all();
 
 	return 0;
 }
-
-static void cache_flush(void)
-{
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));
-}
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index d91ae12cb9..0e698b624b 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -255,6 +255,14 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
  * initialization, now running from RAM.
  */
 jump_2_ram:
+/*
+ * If I-cache is enabled invalidate it
+ */
+#ifndef CONFIG_SYS_ICACHE_OFF
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
+#endif
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
 	add	lr, r0, r1
@@ -290,6 +298,9 @@ cpu_init_crit:
 	mov	r0, #0			@ set up for MCR
 	mcr	p15, 0, r0, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, r0, c7, c5, 0	@ invalidate icache
+	mcr	p15, 0, r0, c7, c5, 6	@ invalidate BP array
+	mcr     p15, 0, r0, c7, c10, 4	@ DSB
+	mcr     p15, 0, r0, c7, c5, 4	@ ISB
 
 	/*
 	 * disable MMU stuff and caches
@@ -298,7 +309,12 @@ cpu_init_crit:
 	bic	r0, r0, #0x00002000	@ clear bits 13 (--V-)
 	bic	r0, r0, #0x00000007	@ clear bits 2:0 (-CAM)
 	orr	r0, r0, #0x00000002	@ set bit 1 (--A-) Align
-	orr	r0, r0, #0x00000800	@ set bit 12 (Z---) BTB
+	orr	r0, r0, #0x00000800	@ set bit 11 (Z---) BTB
+#ifdef CONFIG_SYS_ICACHE_OFF
+	bic	r0, r0, #0x00001000	@ clear bit 12 (I) I-cache
+#else
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-cache
+#endif
 	mcr	p15, 0, r0, c1, c0, 0
 
 	/*
-- 
cgit