From e3fdf5d05659dbe5ce3f9661a4eb3202005b2be2 Mon Sep 17 00:00:00 2001 From: Jean-Francois Dagenais Date: Sun, 2 Apr 2017 21:44:34 -0400 Subject: arm64: zynqmp: spl: fix dual SD controller support When enabling both SDHCI controllers, spl_mmc.c would actually choose device sdhci0 even if booted from sdhci1 (boot_device). This is because spl_mmc_get_device_index(boot_device) expects BOOT_DEVICE_MMC2[_2] in order to return index 1 instead of 0. The #if defined(...) statement is copied from board/xilinx/zynqmp/zynqmp.c So the key to properly enabling both controllers as boot sources is defining both CONFIG_ZYNQ_SDHCI0 and CONFIG_ZYNQ_SDHCI1 in your board's include/configs/*.h. Signed-off-by: Jean-Francois Dagenais Signed-off-by: Michal Simek --- arch/arm/cpu/armv8/zynqmp/spl.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c index 7b78d23cf8..6afa0740d0 100644 --- a/arch/arm/cpu/armv8/zynqmp/spl.c +++ b/arch/arm/cpu/armv8/zynqmp/spl.c @@ -83,10 +83,15 @@ u32 spl_boot_device(void) case JTAG_MODE: return BOOT_DEVICE_RAM; #ifdef CONFIG_SPL_MMC_SUPPORT + case SD_MODE1: case SD1_LSHFT_MODE: - case EMMC_MODE: +/* if both controllers enabled, then these two are the second controller */ +#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1) + return BOOT_DEVICE_MMC2; +/* else, fall through, the one SDHCI controller that is enabled is number 1 */ +#endif case SD_MODE: - case SD_MODE1: + case EMMC_MODE: return BOOT_DEVICE_MMC1; #endif #ifdef CONFIG_SPL_DFU_SUPPORT @@ -111,6 +116,7 @@ u32 spl_boot_mode(const u32 boot_device) case BOOT_DEVICE_RAM: return 0; case BOOT_DEVICE_MMC1: + case BOOT_DEVICE_MMC2: return MMCSD_MODE_FS; default: puts("spl: error: unsupported device\n"); -- cgit