From 74f04490f22428531f9fd5fcd9ca61b6e145a12b Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Mon, 27 Apr 2020 15:21:14 +0300 Subject: arm: dts: lx2160aqds: add nodes describing possible mezzanine cards Add device trees describing possible uses of mezzanine cards depending on the SERDES protocol employed. This patch adds DPAA2 networking support for the following protocols on each SERDES block: * SD #1: 3, 7, 19, 20 * SD #2: 11 Each SERDES block has a different device tree file per protocol supported, where the IO SLOTs used are enabled and PHYs located on the mezzanine cards are described. Also, dpmac nodes are edited and their associated phy-connection-type and phy-handle are added. Top DTS files are also added for each combination of protocol on the 3 SERDES blocks. Signed-off-by: Ioana Ciornei Reviewed-by: Razvan Ionut Cirjan [Rebased] Signed-off-by: Priyanka Jain --- arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts (limited to 'arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts') diff --git a/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts b/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts new file mode 100644 index 0000000000..3b21c87b93 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 3.11.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-3.dtsi" + +#include "fsl-lx2160a-qds-sd2-11.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 3.11.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; -- cgit