From 1b28a5e2b00a9bf3523cc63694baa03f23604619 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Thu, 30 Apr 2020 15:52:46 +0200 Subject: ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2 DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi') diff --git a/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi index 248fc455e3..64299df816 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi @@ -40,10 +40,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -78,7 +74,6 @@ regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -118,8 +113,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = ; interrupt-parent = <&pmic>; }; @@ -145,7 +138,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { -- cgit