From 0cc47a8ead4f146ebfb37009af2dd2107d329391 Mon Sep 17 00:00:00 2001
From: Jagan Teki <jagan@amarulasolutions.com>
Date: Fri, 12 Apr 2019 16:19:34 +0530
Subject: arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2

Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/sun7i-a20-bananapro.dts | 65 +++++-------------------------------
 1 file changed, 8 insertions(+), 57 deletions(-)

(limited to 'arch/arm/dts/sun7i-a20-bananapro.dts')

diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
index 0898eb6162..0176e9de01 100644
--- a/arch/arm/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -62,8 +62,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bananapro>;
 
 		blue {
 			label = "bananapro:blue:usr";
@@ -78,15 +76,11 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_bananapro>;
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_bananapro>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -114,7 +108,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
@@ -126,8 +120,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -142,20 +134,16 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -163,8 +151,6 @@
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -188,74 +174,39 @@
 	status = "okay";
 };
 
-&pio {
-	gmac_power_pin_bananapro: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_bananapro: led_pins@0 {
-		pins = "PH24", "PG2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-		pins = "PH0";
-		function = "gpio_out";
-	};
-
-	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-		pins = "PH1";
-		function = "gpio_out";
-	};
-
-	vmmc3_pin_bananapro: vmmc3_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 	status = "okay";
 };
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>,
-		    <&spi0_cs1_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_b>;
+	pinctrl-0 = <&uart4_ph_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
-- 
cgit