From 64e2793f70c4688977b5e3fa7b503c7f3c7205ac Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 18 Jun 2020 22:14:42 -0300 Subject: ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode) the correct phy-mode should be "rgmii-id", so fix it accordingly to fix the Ethernet regression. This problem has been exposed by commit: commit 13114f38e2ccea9386726d8b9831dfc310589548 Author: Vladimir Oltean Date: Thu May 7 00:11:51 2020 +0200 phy: atheros: Explicitly disable RGMII delays To eliminate any doubts about the out-of-reset value of the PHY, that the driver previously relied on. If bisecting shows that this commit breaks your board you probably have a wrong PHY interface mode. You probably want the PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode. Signed-off-by: Vladimir Oltean Acked-by: Joe Hershberger Fix the phy-mode accordingly to fix the regression. Signed-off-by: Fabio Estevam --- arch/arm/dts/imx6qdl-sabreauto.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/dts') diff --git a/arch/arm/dts/imx6qdl-sabreauto.dtsi b/arch/arm/dts/imx6qdl-sabreauto.dtsi index a6dc5c42c6..28a7fdb0f1 100644 --- a/arch/arm/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/dts/imx6qdl-sabreauto.dtsi @@ -281,7 +281,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; -- cgit