From cd324a6dd252856fa55bd17d539a9466ae86411a Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Thu, 8 May 2014 21:43:46 +0530 Subject: ARM: omap5: add platform specific info for GPMC and ELM controllers This patch moves platform specific information for GPMC and ELM controller into separate header files, so that any derivative devices do not mess other header files. Platform specific information added into arch-xx/../hardware.h - CPU related platform specific details like base-address of GPMC and ELM Platform specific information added into arch-xx/../mem.h - Generic configs for GPMC and ELM initialization. - Hardware parameters or constrains specific to GPMC and ELM IP like; number of max number of chip-selects available Signed-off-by: Pekon Gupta --- arch/arm/include/asm/arch-omap5/cpu.h | 5 +-- arch/arm/include/asm/arch-omap5/hardware.h | 26 +++++++++++++ arch/arm/include/asm/arch-omap5/mem.h | 62 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-omap5/omap.h | 3 -- 4 files changed, 90 insertions(+), 6 deletions(-) create mode 100644 arch/arm/include/asm/arch-omap5/hardware.h create mode 100644 arch/arm/include/asm/arch-omap5/mem.h (limited to 'arch/arm/include/asm/arch-omap5') diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 5f1d7454d0..6109b92777 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -14,6 +14,8 @@ #include #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ +#include + #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ struct gptimer { @@ -63,9 +65,6 @@ struct watchdog { #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) -/* GPMC BASE */ -#define GPMC_BASE (OMAP54XX_GPMC_BASE) - /* I2C base */ #define I2C_BASE1 (OMAP54XX_L4_PER_BASE + 0x70000) #define I2C_BASE2 (OMAP54XX_L4_PER_BASE + 0x72000) diff --git a/arch/arm/include/asm/arch-omap5/hardware.h b/arch/arm/include/asm/arch-omap5/hardware.h new file mode 100644 index 0000000000..f7011b4e90 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/hardware.h @@ -0,0 +1,26 @@ +/* + * hardware.h + * + * hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __OMAP_HARDWARE_H +#define __OMAP_HARDWARE_H + +#include + +/* + * Common hardware definitions + */ + +/* BCH Error Location Module */ +#define ELM_BASE 0x48078000 + +/* GPMC Base address */ +#define GPMC_BASE 0x50000000 + +#endif diff --git a/arch/arm/include/asm/arch-omap5/mem.h b/arch/arm/include/asm/arch-omap5/mem.h new file mode 100644 index 0000000000..d2e708bba5 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mem.h @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, + * + * Author + * Mansoor Ahamed + * + * Initial Code from: + * Richard Woodruff + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MEM_H_ +#define _MEM_H_ + +/* + * GPMC settings - + * Definitions is as per the following format + * #define _GPMC_CONFIG + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * M_NAND - Micron NAND + * STNOR - STMicrolelctronics M29W128GL + */ +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#define M_NAND_GPMC_CONFIG1 0x00000800 +#define M_NAND_GPMC_CONFIG2 0x001e1e00 +#define M_NAND_GPMC_CONFIG3 0x001e1e00 +#define M_NAND_GPMC_CONFIG4 0x16051807 +#define M_NAND_GPMC_CONFIG5 0x00151e1e +#define M_NAND_GPMC_CONFIG6 0x16000f80 +#define M_NAND_GPMC_CONFIG7 0x00000008 + +#define STNOR_GPMC_CONFIG1 0x00001200 +#define STNOR_GPMC_CONFIG2 0x00101000 +#define STNOR_GPMC_CONFIG3 0x00030301 +#define STNOR_GPMC_CONFIG4 0x10041004 +#define STNOR_GPMC_CONFIG5 0x000C1010 +#define STNOR_GPMC_CONFIG6 0x08070280 +#define STNOR_GPMC_CONFIG7 0x00000F48 + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index e35a81a8af..a82a7b2bed 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -60,9 +60,6 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) -/* GPMC */ -#define OMAP54XX_GPMC_BASE 0x50000000 - /* QSPI */ #define QSPI_BASE 0x4B300000 -- cgit