From da9971d1b3bdb554d4a4ac948119f8b2616bbcce Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 26 Jun 2015 19:42:24 +0100 Subject: Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell Conflicts: include/configs/sun6i.h include/configs/sun8i.h --- arch/arm/include/asm/arch-sunxi/gpio.h | 2 - arch/arm/include/asm/arch-sunxi/nand.h | 67 ---------------------------------- 2 files changed, 69 deletions(-) delete mode 100644 arch/arm/include/asm/arch-sunxi/nand.h (limited to 'arch/arm/include/asm/arch-sunxi') diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index b628fee3ea..496295d357 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -157,8 +157,6 @@ enum sunxi_gpio_number { #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 -#define SUNXI_GPC_NAND 2 - #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 diff --git a/arch/arm/include/asm/arch-sunxi/nand.h b/arch/arm/include/asm/arch-sunxi/nand.h deleted file mode 100644 index 22844d84b8..0000000000 --- a/arch/arm/include/asm/arch-sunxi/nand.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2015 Roy Spliet - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SUNXI_NAND_H -#define _SUNXI_NAND_H - -#include - -struct sunxi_nand -{ - u32 ctl; /* 0x000 Configure and control */ - u32 st; /* 0x004 Status information */ - u32 intr; /* 0x008 Interrupt control */ - u32 timing_ctl; /* 0x00C Timing control */ - u32 timing_cfg; /* 0x010 Timing configure */ - u32 addr_low; /* 0x014 Low word address */ - u32 addr_high; /* 0x018 High word address */ - u32 block_num; /* 0x01C Data block number */ - u32 data_cnt; /* 0x020 Data counter for transfer */ - u32 cmd; /* 0x024 NDFC commands */ - u32 rcmd_set; /* 0x028 Read command set for vendor NAND mem */ - u32 wcmd_set; /* 0x02C Write command set */ - u32 io_data; /* 0x030 IO data */ - u32 ecc_ctl; /* 0x034 ECC configure and control */ - u32 ecc_st; /* 0x038 ECC status and operation info */ - u32 efr; /* 0x03C Enhanced feature */ - u32 err_cnt0; /* 0x040 Corrected error bit counter 0 */ - u32 err_cnt1; /* 0x044 Corrected error bit counter 1 */ - u32 user_data[16]; /* 0x050[16] User data field */ - u32 efnand_st; /* 0x090 EFNAND status */ - u32 res0[3]; - u32 spare_area; /* 0x0A0 Spare area configure */ - u32 pat_id; /* 0x0A4 Pattern ID register */ - u32 rdata_sta_ctl; /* 0x0A8 Read data status control */ - u32 rdata_sta_0; /* 0x0AC Read data status 0 */ - u32 rdata_sta_1; /* 0x0B0 Read data status 1 */ - u32 res1[3]; - u32 mdma_addr; /* 0x0C0 MBUS DMA Address */ - u32 mdma_cnt; /* 0x0C4 MBUS DMA data counter */ -}; - -#define SUNXI_NAND_CTL_EN (1 << 0) -#define SUNXI_NAND_CTL_RST (1 << 1) -#define SUNXI_NAND_CTL_PAGE_SIZE(a) ((fls(a) - 11) << 8) -#define SUNXI_NAND_CTL_RAM_METHOD_DMA (1 << 14) - -#define SUNXI_NAND_ST_CMD_INT (1 << 1) -#define SUNXI_NAND_ST_DMA_INT (1 << 2) -#define SUNXI_NAND_ST_FIFO_FULL (1 << 3) - -#define SUNXI_NAND_CMD_ADDR_CYCLES(a) ((a - 1) << 16); -#define SUNXI_NAND_CMD_SEND_CMD1 (1 << 22) -#define SUNXI_NAND_CMD_WAIT_FLAG (1 << 23) -#define SUNXI_NAND_CMD_ORDER_INTERLEAVE 0 -#define SUNXI_NAND_CMD_ORDER_SEQ (1 << 25) - -#define SUNXI_NAND_ECC_CTL_ECC_EN (1 << 0) -#define SUNXI_NAND_ECC_CTL_PIPELINE (1 << 3) -#define SUNXI_NAND_ECC_CTL_BS_512B (1 << 5) -#define SUNXI_NAND_ECC_CTL_RND_EN (1 << 9) -#define SUNXI_NAND_ECC_CTL_MODE(a) ((a) << 12) -#define SUNXI_NAND_ECC_CTL_RND_SEED(a) ((a) << 16) - -#endif /* _SUNXI_NAND_H */ -- cgit