From 10e959a1ca85c66d877cc2fcab6e1fe49b478b1b Mon Sep 17 00:00:00 2001 From: Parthiban Nallathambi Date: Mon, 27 Jul 2020 16:48:41 +0200 Subject: imx: Add MYiR Tech MYS-6ULX support MYS-6ULX is single board computer (SBC) comes with eMMC or NAND based on imx6ULL SoC from NXP and provision for expansion board. This commit adds support only for SBC with NAND. CPU: Freescale i.MX6ULL rev1.1 528 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 45C Reset cause: WDOG Model: MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND Board: MYiR MYS-6ULX 6ULL Single Board Computer DRAM: 256 MiB NAND: 256 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Parthiban Nallathambi --- arch/arm/mach-imx/mx6/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm/mach-imx/mx6') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index fdee0d4f64..17173f9839 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -460,6 +460,18 @@ config TARGET_MX6ULL_14X14_EVK select MX6ULL imply CMD_DM +config TARGET_MYS_6ULX + bool "MYiR MYS-6ULX" + select MX6ULL + select DM + select DM_ETH + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_SERIAL + select DM_THERMAL + select SUPPORT_SPL + config TARGET_NITROGEN6X bool "nitrogen6x" imply USB_ETHER_ASIX -- cgit