From 11f3afeaa5a03e624e630c6b2187efb998d49972 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:43 +0900 Subject: ARM: uniphier: drop ad-hoc early pin-muxing settings As the UniPhier serial driver had already switched to Drive Model and the pinctrl drivers are now enabled, these pin-muxing settings are properly handled by the pinctrl drivers. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass --- arch/arm/mach-uniphier/ph1-ld4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c | 27 ------------------------- arch/arm/mach-uniphier/ph1-pro4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c | 26 ------------------------ arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c | 27 ------------------------- arch/arm/mach-uniphier/spl.c | 5 +++++ 6 files changed, 7 insertions(+), 82 deletions(-) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 1410b12cb6..789820e067 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -5,7 +5,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o + pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o else diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c deleted file mode 100644 index e5e86bb363..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index 229f4432ff..7fdb36a394 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -5,7 +5,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o + pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o else diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c deleted file mode 100644 index e78d6ab501..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c deleted file mode 100644 index 28cc4296fc..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index a34d3a167c..86764bcc73 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -15,6 +15,11 @@ void __weak bcu_init(void) { }; + +void __weak early_pin_init(void) +{ +}; + void sbc_init(void); void sg_init(void); void pll_init(void); -- cgit From 1386233da33235a68d9f4321e505bfa97370d949 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:44 +0900 Subject: ARM: uniphier: drop ad-hoc input enable settings These input enable settings are handled by the pinctrl drivers. Because the external bus pins are input-enabled by default, on-board devices such as LED still work fine even with this delayed input enabling. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/ph1-ld4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-ld4/sg_init.c | 18 ------------------ arch/arm/mach-uniphier/ph1-pro4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-pro4/sg_init.c | 18 ------------------ arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 9 --------- arch/arm/mach-uniphier/ph1-sld8/sg_init.c | 1 - arch/arm/mach-uniphier/spl.c | 8 +++++--- 7 files changed, 7 insertions(+), 51 deletions(-) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sg_init.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 789820e067..0c198c65e7 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -4,7 +4,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \ +obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c deleted file mode 100644 index dab56e949c..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 0x1; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index 7fdb36a394..afd9235e9b 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -4,7 +4,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sg_init.o pll_init.o early_clkrst_init.o \ +obj-y += pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index d6ccffbbc3..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c index 130c831736..98da1f9fe9 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c @@ -11,15 +11,6 @@ void pin_init(void) { /* Comment format: PAD Name -> Function Name */ -#ifdef CONFIG_SYS_I2C_UNIPHIER - { - u32 tmp; - tmp = readl(SG_IECTRL); - tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ - writel(tmp, SG_IECTRL); - } -#endif - #ifdef CONFIG_NAND_DENALI sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ diff --git a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c deleted file mode 100644 index a808289a56..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index 86764bcc73..78534fc41c 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -1,7 +1,5 @@ /* - * Copyright (C) 2013-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2013-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -16,6 +14,10 @@ void __weak bcu_init(void) { }; +void __weak sg_init(void) +{ +}; + void __weak early_pin_init(void) { }; -- cgit From 9879842c6fdb64d95085ac66647ed77d7abfd439 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:45 +0900 Subject: ARM: uniphier: drop DCC micro support card support Historically (for compatibility with very old platforms), two different types of micro support cards have been used with the UniPhier SoC development boards. It has been painful to maintain both. Having one of them is enough. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass --- arch/arm/mach-uniphier/Kconfig | 23 ++----- arch/arm/mach-uniphier/Makefile | 3 +- arch/arm/mach-uniphier/include/mach/board.h | 6 +- arch/arm/mach-uniphier/ph1-ld4/Makefile | 3 +- arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c | 49 --------------- arch/arm/mach-uniphier/ph1-pro4/Makefile | 3 +- arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c | 42 ------------- arch/arm/mach-uniphier/ph1-sld3/Makefile | 3 +- arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c | 37 ----------- arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c | 57 ----------------- arch/arm/mach-uniphier/support_card.c | 87 +++----------------------- 11 files changed, 20 insertions(+), 293 deletions(-) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7b49ad3b49..28d574fbb8 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -26,29 +26,14 @@ config MACH_PH1_SLD8 endchoice -choice - prompt "UniPhier Support Card select" - optional - -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" - help - This option provides support for the expansion board with PFC - original address mapping. - - Say Y to use the on-board UART, Ether, LED devices. - -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" +config MICRO_SUPPORT_CARD + bool "Use Micro Support Card" help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. + This option provides support for the expansion board, available + on some UniPhier reference boards. Say Y to use the on-board UART, Ether, LED devices. -endchoice - config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 103db6d7dc..5f175575e8 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -29,8 +29,7 @@ endif obj-y += timer.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h index e3cba5befe..c039d807f4 100644 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ b/arch/arm/mach-uniphier/include/mach/board.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,8 +7,7 @@ #ifndef ARCH_BOARD_H #define ARCH_BOARD_H -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +#if defined(CONFIG_MICRO_SUPPORT_CARD) void support_card_reset(void); void support_card_init(void); void support_card_late_init(void); diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 0c198c65e7..4a2c944aee 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c deleted file mode 100644 index 5b5958be05..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ - - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index afd9235e9b..a52b5aa556 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c deleted file mode 100644 index 877ba79f68..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ - - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile index aff5d640d6..e3cb39fa50 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c deleted file mode 100644 index f5e24467ce..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* XECS0 : boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); - - /* XECS1 : sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - /* XECS2 : peripherals */ - writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); - writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); - writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE2); - - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c deleted file mode 100644 index c2267c73ee..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * SBCTRL0* does not need settings because PH1-sLD8 has no support for - * XECS0. The boot swap must be enabled to boot from the support card. - */ - - if (boot_is_swapped()) { - /* XECS1 : boot memory if boot swap is on */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - } - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(0)); -} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index ea85b20e97..4ca6ffea2d 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -8,11 +8,9 @@ #include #include -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - -#define PFC_MICRO_SUPPORT_CARD_RESET \ +#define MICRO_SUPPORT_CARD_RESET \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ +#define MICRO_SUPPORT_CARD_REVISION \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset @@ -22,65 +20,22 @@ */ void support_card_reset_deassert(void) { - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); + writel(0, MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); + writel(3, MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif int check_support_card(void) { @@ -146,28 +101,11 @@ static int mem_is_flash(const struct memory_bank *mem) return ret; } -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { +/* {address, size} */ +static const struct memory_bank memory_banks[] = { {0x02000000, 0x01f00000}, }; -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, -}; -#endif - static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; @@ -187,13 +125,8 @@ static void detect_num_flash_banks(void) cfi_flash_num_flash_banks = 0; - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks); for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= -- cgit From d5ed8c5727f6985505ceb6e8640528e7e08e9670 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:47 +0900 Subject: ARM: uniphier: change the external bus address mapping In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces 0x00000000 - 0x0fffffff 0x40000000 - 0x4fffffff are both mapped to the external bus (also called system bus), so either was OK. In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is assigned for the serial NOR interface. Going forward, use the latter for the external bus. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass --- arch/arm/mach-uniphier/ph1-ld4/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/ph1-pro4/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/ph1-sld3/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/support_card.c | 2 +- 4 files changed, 19 insertions(+), 19 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c index 8e25792b50..4435a47e73 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c @@ -30,18 +30,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c index 533739c364..685f9c736c 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c @@ -23,18 +23,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c index d66f89ea51..bafab4b0e6 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -24,18 +24,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index 4ca6ffea2d..ef4576de43 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -103,7 +103,7 @@ static int mem_is_flash(const struct memory_bank *mem) /* {address, size} */ static const struct memory_bank memory_banks[] = { - {0x02000000, 0x01f00000}, + {0x42000000, 0x01f00000}, }; static const struct memory_bank -- cgit From 9628afa7f5cd6d752adc7bb77ea14fd639a66d03 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:48 +0900 Subject: ARM: uniphier: remove ifdef CONFIG_{SOC} conditionals from sg-regs.h To achieve the complete run-time configuration by device trees, ifdef conditionals in header files are not preferable. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/include/mach/sg-regs.h | 40 +++++++------------ arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-ld4/pinctrl.c | 46 +++++++++++----------- arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 50 ++++++++++++------------ arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c | 12 +++--- arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-sld3/pinctrl.c | 16 ++++---- arch/arm/mach-uniphier/ph1-sld3/sbc_init.c | 2 +- arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S | 4 +- arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 46 +++++++++++----------- 11 files changed, 109 insertions(+), 119 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index 43a6c35339..c886e1c655 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -53,24 +53,6 @@ /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) -#if defined(CONFIG_MACH_PH1_PRO4) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ - defined(CONFIG_MACH_PH1_SLD8) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) -#endif - -#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) -#define SG_PINSELBITS 4 -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define SG_PINSELBITS 8 -#endif - -#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) -#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ - ((n) * (SG_PINSELBITS) % 32))) -#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) - /* Only for PH1-Pro4 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) @@ -98,11 +80,11 @@ #ifdef __ASSEMBLY__ - .macro set_pinsel, n, value, ra, rd - ldr \ra, =SG_PINSEL_ADDR(\n) + .macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd + ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride) ldr \rd, [\ra] - and \rd, \rd, #SG_PINSEL_MASK(\n) - orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32)) + orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32)) str \rd, [\ra] .endm @@ -111,10 +93,18 @@ #include #include -static inline void sg_set_pinsel(int n, int value) +static inline void sg_set_pinsel(unsigned pin, unsigned muxval, + unsigned mux_bits, unsigned reg_stride) { - writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) - | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); + unsigned shift = pin * mux_bits % 32; + unsigned reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride; + u32 mask = (1U << mux_bits) - 1; + u32 tmp; + + tmp = readl(reg); + tmp &= ~(mask << shift); + tmp |= (mask & muxval) << shift; + writel(tmp, reg); } #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S index 7928c5c87c..fd393dcfb3 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S @@ -17,8 +17,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 + sg_set_pinsel 85, 1, 8, 4, r0, r1 + sg_set_pinsel 88, 1, 8, 4, r0, r1 ldr r0, =SG_IECTRL ldr r1, [r0] diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c index 20cc7b30c4..293a6ab423 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c @@ -14,32 +14,32 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ + sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ + sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ #endif tmp = readl(SG_IECTRL); diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S index fcaf6d12d8..19bef2a157 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -23,8 +23,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 + sg_set_pinsel 127, 0, 4, 8, r0, r1 + sg_set_pinsel 128, 0, 4, 8, r0, r1 ldr r0, =SG_LOADPINCTRL mov r1, #1 diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c index 2a5a296f88..bfaff4fea9 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c @@ -12,37 +12,37 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ - /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */ - /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */ + sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ #endif #ifdef CONFIG_USB_XHCI_UNIPHIER - sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */ + sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ + sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ #endif writel(1, SG_LOADPINCTRL); diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c index f113e658d8..f6ceef5f1c 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c @@ -11,13 +11,13 @@ void early_pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(63, 0); /* RXD0 */ - sg_set_pinsel(64, 1); /* TXD0 */ + sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ + sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ - sg_set_pinsel(65, 0); /* RXD1 */ - sg_set_pinsel(66, 1); /* TXD1 */ + sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ + sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ - sg_set_pinsel(96, 2); /* RXD2 */ - sg_set_pinsel(102, 2); /* TXD2 */ + sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ + sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ #endif } diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S index 41f67b7a8f..ee2eae6bf7 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S @@ -26,8 +26,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 - set_pinsel 63, 0, r0, r1 - set_pinsel 64, 1, r0, r1 + sg_set_pinsel 63, 0, 4, 4, r0, r1 + sg_set_pinsel 64, 1, 4, 4, r0, r1 mov pc, lr ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c index 5ecbe4cca3..dea938ed2f 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c @@ -9,16 +9,16 @@ void pin_init(void) { #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(13, 0); /* USB0OC */ - sg_set_pinsel(14, 1); /* USB0VBUS */ + sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ + sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ - sg_set_pinsel(15, 0); /* USB1OC */ - sg_set_pinsel(16, 1); /* USB1VBUS */ + sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ + sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ - sg_set_pinsel(17, 0); /* USB2OC */ - sg_set_pinsel(18, 1); /* USB2VBUS */ + sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ + sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ - sg_set_pinsel(19, 0); /* USB3OC */ - sg_set_pinsel(20, 1); /* USB3VBUS */ + sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ + sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ #endif } diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c index bafab4b0e6..3e62121ba9 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -41,5 +41,5 @@ void sbc_init(void) writel(0x0200be01, SBBASE1); } - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ } diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S index 73f0f63eba..3ada4c9948 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S @@ -17,8 +17,8 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 + sg_set_pinsel 70, 3, 8, 4, r0, r1 + sg_set_pinsel 71, 3, 8, 4, r0, r1 ldr r0, =SG_IECTRL ldr r1, [r0] diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c index 98da1f9fe9..1b64414553 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c @@ -12,31 +12,31 @@ void pin_init(void) /* Comment format: PAD Name -> Function Name */ #ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ + sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ #endif #ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1); */ /* RXD1 -> USB2OD */ + sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ #endif } -- cgit From cf88affab6c46bc728d47fe2590c465734d78efb Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 11 Sep 2015 20:17:49 +0900 Subject: ARM: uniphier: parse device tree to determine DRAM base and size Device tree specifies the available memory ranges in its "/memory" node. Use it to simplify the CONFIG defines. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/board_common.c | 12 --------- arch/arm/mach-uniphier/dram_init.c | 51 ++++++++++++++++++++++++++++++++--- 2 files changed, 47 insertions(+), 16 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c index 5f2d5f6f5b..967fa6c086 100644 --- a/arch/arm/mach-uniphier/board_common.c +++ b/arch/arm/mach-uniphier/board_common.c @@ -18,15 +18,3 @@ int board_init(void) return 0; } - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c index 4b8c938b5e..32cc448aeb 100644 --- a/arch/arm/mach-uniphier/dram_init.c +++ b/arch/arm/mach-uniphier/dram_init.c @@ -1,16 +1,59 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ #include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static const void *get_memory_reg_prop(const void *fdt, int *lenp) +{ + int offset; + + offset = fdt_path_offset(fdt, "/memory"); + if (offset < 0) + return NULL; + + return fdt_getprop(fdt, offset, "reg", lenp); +} int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + const fdt32_t *val; + int len; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < sizeof(*val)) + return -EINVAL; + + gd->ram_size = fdt32_to_cpu(*(val + 1)); + + debug("DRAM size = %08lx\n", gd->ram_size); return 0; } + +void dram_init_banksize(void) +{ + const fdt32_t *val; + int len, i; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < 0) + return; + + len /= sizeof(*val); + len /= 2; + + for (i = 0; i < len; i++) { + gd->bd->bi_dram[i].start = fdt32_to_cpu(*val++); + gd->bd->bi_dram[i].size = fdt32_to_cpu(*val++); + + debug("DRAM bank %d: start = %08lx, size = %08lx\n", + i, gd->bd->bi_dram[i].start, gd->bd->bi_dram[i].size); + } +} -- cgit From f1378cabc0d340393bc7e0312f5e1f70d5d19434 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:29 +0900 Subject: ARM: uniphier: remove unused header file This has been unused since commit f4e190e317b8 ("ARM: uniphier: enable SPL_OF_CONTROL"). Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/include/mach/platdevice.h | 24 ------------------------ 1 file changed, 24 deletions(-) delete mode 100644 arch/arm/mach-uniphier/include/mach/platdevice.h (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/include/mach/platdevice.h b/arch/arm/mach-uniphier/include/mach/platdevice.h deleted file mode 100644 index cdf7d132d4..0000000000 --- a/arch/arm/mach-uniphier/include/mach/platdevice.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_PLATDEVICE_H -#define ARCH_PLATDEVICE_H - -#include -#include - -#define SERIAL_DEVICE(n, ba, clk) \ -static struct uniphier_serial_platform_data serial_device##n = { \ - .base = ba, \ - .uartclk = clk \ -}; \ -U_BOOT_DEVICE(serial##n) = { \ - .name = DRIVER_NAME, \ - .platdata = &serial_device##n \ -}; - -#endif /* ARCH_PLATDEVICE_H */ -- cgit From 0b198670c6525392337462282efeaefe459e14cd Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:30 +0900 Subject: ARM: uniphier: remove useless wrapper functions The wrapper functions, uniphier_board_*, are just making function calls complex. Remove them. Also, use empty inline functions in case CONFIG_MICRO_SUPPORT_CARD is disabled, so that prototype checking works. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/board_early_init_r.c | 5 ++--- arch/arm/mach-uniphier/include/mach/board.h | 18 ++++++------------ arch/arm/mach-uniphier/spl.c | 4 ++-- 3 files changed, 10 insertions(+), 17 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c index 579fe70463..7d4830a3a8 100644 --- a/arch/arm/mach-uniphier/board_early_init_r.c +++ b/arch/arm/mach-uniphier/board_early_init_r.c @@ -1,6 +1,5 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -10,6 +9,6 @@ int board_early_init_r(void) { - uniphier_board_late_init(); + support_card_late_init(); return 0; } diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h index c039d807f4..5b9af222ae 100644 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ b/arch/arm/mach-uniphier/include/mach/board.h @@ -13,28 +13,22 @@ void support_card_init(void); void support_card_late_init(void); int check_support_card(void); #else -#define support_card_reset() do {} while (0) -#define support_card_init() do {} while (0) -#define support_card_late_init() do {} while (0) -static inline int check_support_card(void) +static inline void support_card_reset(void) { - return 0; } -#endif -static inline void uniphier_board_reset(void) +static inline void support_card_init(void) { - support_card_reset(); } -static inline void uniphier_board_init(void) +static inline void support_card_late_init(void) { - support_card_init(); } -static inline void uniphier_board_late_init(void) +static inline int check_support_card(void) { - support_card_late_init(); + return 0; } +#endif #endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index 78534fc41c..661d73ae4a 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -40,11 +40,11 @@ void spl_board_init(void) sg_init(); - uniphier_board_reset(); + support_card_reset(); pll_init(); - uniphier_board_init(); + support_card_init(); led_write(L, 0, , ); -- cgit From 8469700b6c9cf31e4e2df7a005f5f5385c5be5d4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:31 +0900 Subject: ARM: uniphier: refactor LED function The macro, led_write(), is now only used in C sources. There is no more reason to keep the tricky assembly macro. Replace it with a new C function led_puts(). Also, rename board.h to micro-support-card.h. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/board_common.c | 11 +-- arch/arm/mach-uniphier/board_early_init_f.c | 12 ++- arch/arm/mach-uniphier/board_early_init_r.c | 2 +- arch/arm/mach-uniphier/include/mach/board.h | 34 ------- arch/arm/mach-uniphier/include/mach/led.h | 100 --------------------- .../include/mach/micro-support-card.h | 39 ++++++++ arch/arm/mach-uniphier/lowlevel_init.S | 1 - arch/arm/mach-uniphier/print_misc_info.c | 2 +- arch/arm/mach-uniphier/spl.c | 18 ++-- arch/arm/mach-uniphier/support_card.c | 73 ++++++++++++++- 10 files changed, 130 insertions(+), 162 deletions(-) delete mode 100644 arch/arm/mach-uniphier/include/mach/board.h delete mode 100644 arch/arm/mach-uniphier/include/mach/led.h create mode 100644 arch/arm/mach-uniphier/include/mach/micro-support-card.h (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c index 967fa6c086..198004b59b 100644 --- a/arch/arm/mach-uniphier/board_common.c +++ b/arch/arm/mach-uniphier/board_common.c @@ -1,20 +1,15 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ #include -#include +#include -/* - * Routine: board_init - * Description: Early hardware init. - */ int board_init(void) { - led_write(U, B, O, O); + led_puts("Uboo"); return 0; } diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index 7108740408..45f5cea433 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -1,27 +1,25 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ -#include -#include +#include void pin_init(void); void clkrst_init(void); int board_early_init_f(void) { - led_write(U, 0, , ); + led_puts("U0"); pin_init(); - led_write(U, 1, , ); + led_puts("U1"); clkrst_init(); - led_write(U, 2, , ); + led_puts("U2"); return 0; } diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c index 7d4830a3a8..28c7f82228 100644 --- a/arch/arm/mach-uniphier/board_early_init_r.c +++ b/arch/arm/mach-uniphier/board_early_init_r.c @@ -5,7 +5,7 @@ */ #include -#include +#include int board_early_init_r(void) { diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h deleted file mode 100644 index 5b9af222ae..0000000000 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2012-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_BOARD_H -#define ARCH_BOARD_H - -#if defined(CONFIG_MICRO_SUPPORT_CARD) -void support_card_reset(void); -void support_card_init(void); -void support_card_late_init(void); -int check_support_card(void); -#else -static inline void support_card_reset(void) -{ -} - -static inline void support_card_init(void) -{ -} - -static inline void support_card_late_init(void) -{ -} - -static inline int check_support_card(void) -{ - return 0; -} -#endif - -#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/include/mach/led.h b/arch/arm/mach-uniphier/include/mach/led.h deleted file mode 100644 index f7749b4860..0000000000 --- a/arch/arm/mach-uniphier/include/mach/led.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (C) 2012-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_LED_H -#define ARCH_LED_H - -#include - -#define LED_CHAR_0 0x7e -#define LED_CHAR_1 0x0c -#define LED_CHAR_2 0xb6 -#define LED_CHAR_3 0x9e -#define LED_CHAR_4 0xcc -#define LED_CHAR_5 0xda -#define LED_CHAR_6 0xfa -#define LED_CHAR_7 0x4e -#define LED_CHAR_8 0xfe -#define LED_CHAR_9 0xde - -#define LED_CHAR_A 0xee -#define LED_CHAR_B 0xf8 -#define LED_CHAR_C 0x72 -#define LED_CHAR_D 0xbc -#define LED_CHAR_E 0xf2 -#define LED_CHAR_F 0xe2 -#define LED_CHAR_G 0x7a -#define LED_CHAR_H 0xe8 -#define LED_CHAR_I 0x08 -#define LED_CHAR_J 0x3c -#define LED_CHAR_K 0xea -#define LED_CHAR_L 0x70 -#define LED_CHAR_M 0x6e -#define LED_CHAR_N 0xa8 -#define LED_CHAR_O 0xb8 -#define LED_CHAR_P 0xe6 -#define LED_CHAR_Q 0xce -#define LED_CHAR_R 0xa0 -#define LED_CHAR_S 0xc8 -#define LED_CHAR_T 0x8c -#define LED_CHAR_U 0x7c -#define LED_CHAR_V 0x54 -#define LED_CHAR_W 0xfc -#define LED_CHAR_X 0xec -#define LED_CHAR_Y 0xdc -#define LED_CHAR_Z 0xa4 - -#define LED_CHAR_SPACE 0x00 -#define LED_CHAR_DOT 0x01 - -#define LED_CHAR_ (LED_CHAR_SPACE) - -/** Macro to translate 4 characters into integer to display led */ -#define LED_C2I(C0, C1, C2, C3) \ - (~( \ - (LED_CHAR_##C0 << 24) | \ - (LED_CHAR_##C1 << 16) | \ - (LED_CHAR_##C2 << 8) | \ - (LED_CHAR_##C3) \ - )) - -#if defined(CONFIG_SUPPORT_CARD_LED_BASE) - -#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE - -#ifdef __ASSEMBLY__ - -#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3) -.macro raw_led_write data - ldr r0, =\data - ldr r1, =LED_ADDR - str r0, [r1] -.endm - -#else /* __ASSEMBLY__ */ - -#include - -#define led_write(C0, C1, C2, C3) \ -do { \ - raw_led_write(LED_C2I(C0, C1, C2, C3)); \ -} while (0) - -static inline void raw_led_write(u32 data) -{ - writel(data, LED_ADDR); -} - -#endif /* __ASSEMBLY__ */ - -#else /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#define led_write(C0, C1, C2, C3) -#define raw_led_write(x) - -#endif /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#endif /* ARCH_LED_H */ diff --git a/arch/arm/mach-uniphier/include/mach/micro-support-card.h b/arch/arm/mach-uniphier/include/mach/micro-support-card.h new file mode 100644 index 0000000000..5da0ada726 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/micro-support-card.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_BOARD_H +#define ARCH_BOARD_H + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +void support_card_reset(void); +void support_card_init(void); +void support_card_late_init(void); +int check_support_card(void); +void led_puts(const char *s); +#else +static inline void support_card_reset(void) +{ +} + +static inline void support_card_init(void) +{ +} + +static inline void support_card_late_init(void) +{ +} + +static inline int check_support_card(void) +{ + return 0; +} + +static inline void led_puts(const char *s) +{ +} +#endif + +#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index fd34a4a321..9259bafed0 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-uniphier/print_misc_info.c b/arch/arm/mach-uniphier/print_misc_info.c index 22ea512285..5140b0c438 100644 --- a/arch/arm/mach-uniphier/print_misc_info.c +++ b/arch/arm/mach-uniphier/print_misc_info.c @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include +#include int misc_init_f(void) { diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index 661d73ae4a..f0df9b1e4e 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -7,8 +7,7 @@ #include #include #include -#include -#include +#include void __weak bcu_init(void) { @@ -46,25 +45,25 @@ void spl_board_init(void) support_card_init(); - led_write(L, 0, , ); + led_puts("L0"); memconf_init(); - led_write(L, 1, , ); + led_puts("L1"); early_clkrst_init(); - led_write(L, 2, , ); + led_puts("L2"); early_pin_init(); - led_write(L, 3, , ); + led_puts("L3"); #ifdef CONFIG_SPL_SERIAL_SUPPORT preloader_console_init(); #endif - led_write(L, 4, , ); + led_puts("L4"); { int res; @@ -75,9 +74,10 @@ void spl_board_init(void) ; } } - led_write(L, 5, , ); + + led_puts("L5"); enable_dpll_ssc(); - led_write(L, 6, , ); + led_puts("L6"); } diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index ef4576de43..f833306030 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -5,8 +5,9 @@ */ #include +#include #include -#include +#include #define MICRO_SUPPORT_CARD_RESET \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) @@ -155,3 +156,73 @@ void support_card_late_init(void) { detect_num_flash_banks(); } + +static const u8 ledval_num[] = { + 0x7e, /* 0 */ + 0x0c, /* 1 */ + 0xb6, /* 2 */ + 0x9e, /* 3 */ + 0xcc, /* 4 */ + 0xda, /* 5 */ + 0xfa, /* 6 */ + 0x4e, /* 7 */ + 0xfe, /* 8 */ + 0xde, /* 9 */ +}; + +static const u8 ledval_alpha[] = { + 0xee, /* A */ + 0xf8, /* B */ + 0x72, /* C */ + 0xbc, /* D */ + 0xf2, /* E */ + 0xe2, /* F */ + 0x7a, /* G */ + 0xe8, /* H */ + 0x08, /* I */ + 0x3c, /* J */ + 0xea, /* K */ + 0x70, /* L */ + 0x6e, /* M */ + 0xa8, /* N */ + 0xb8, /* O */ + 0xe6, /* P */ + 0xce, /* Q */ + 0xa0, /* R */ + 0xc8, /* S */ + 0x8c, /* T */ + 0x7c, /* U */ + 0x54, /* V */ + 0xfc, /* W */ + 0xec, /* X */ + 0xdc, /* Y */ + 0xa4, /* Z */ +}; + +static u8 char2ledval(char c) +{ + if (isdigit(c)) + return ledval_num[c - '0']; + else if (isalpha(c)) + return ledval_alpha[toupper(c) - 'A']; + + return 0; +} + +void led_puts(const char *s) +{ + int i; + u32 val = 0; + + if (!s) + return; + + for (i = 0; i < 4; i++) { + val <<= 8; + val |= char2ledval(*s); + if (*s != '\0') + s++; + } + + writel(~val, CONFIG_SUPPORT_CARD_LED_BASE); +} -- cgit From d7728aa408b478f83ec7f39ad80abf1046d71e39 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:32 +0900 Subject: ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file It is no longer necessary to define CONFIG_SUPPORT_CARD_* globally. Move them to a C file as local macros. Also, rename the C file. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Makefile | 2 +- arch/arm/mach-uniphier/micro-support-card.c | 231 ++++++++++++++++++++++++++++ arch/arm/mach-uniphier/support_card.c | 228 --------------------------- 3 files changed, 232 insertions(+), 229 deletions(-) create mode 100644 arch/arm/mach-uniphier/micro-support-card.c delete mode 100644 arch/arm/mach-uniphier/support_card.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 5f175575e8..df6a569b9a 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -29,7 +29,7 @@ endif obj-y += timer.o -obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c new file mode 100644 index 0000000000..4c34748c25 --- /dev/null +++ b/arch/arm/mach-uniphier/micro-support-card.c @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2012-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#define MICRO_SUPPORT_CARD_BASE 0x43f00000 +#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000) +#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000) +#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000) +#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034) +#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0) + +/* + * 0: reset deassert, 1: reset + * + * bit[0]: LAN, I2C, LED + * bit[1]: UART + */ +void support_card_reset_deassert(void) +{ + writel(0, MICRO_SUPPORT_CARD_RESET); +} + +void support_card_reset(void) +{ + writel(3, MICRO_SUPPORT_CARD_RESET); +} + +static int support_card_show_revision(void) +{ + u32 revision; + + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + return 0; +} + +int check_support_card(void) +{ + printf("SC: Micro Support Card "); + return support_card_show_revision(); +} + +void support_card_init(void) +{ + /* + * After power on, we need to keep the LAN controller in reset state + * for a while. (200 usec) + * Fortunately, enough wait time is already inserted in pll_init() + * function. So we do not have to wait here. + */ + support_card_reset_deassert(); +} + +#if defined(CONFIG_SMC911X) +#include + +int board_eth_init(bd_t *bis) +{ + return smc911x_initialize(0, SMC911X_BASE); +} +#endif + +#if !defined(CONFIG_SYS_NO_FLASH) + +#include +#include + +struct memory_bank { + phys_addr_t base; + unsigned long size; +}; + +static int mem_is_flash(const struct memory_bank *mem) +{ + const int loop = 128; + u32 *scratch_addr; + u32 saved_value; + int ret = 1; + int i; + + /* just in case, use the tail of the memory bank */ + scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, + sizeof(u32) * loop, MAP_NOCACHE); + + for (i = 0; i < loop; i++, scratch_addr++) { + saved_value = readl(scratch_addr); + writel(~saved_value, scratch_addr); + if (readl(scratch_addr) != saved_value) { + /* We assume no memory or SRAM here. */ + writel(saved_value, scratch_addr); + ret = 0; + break; + } + } + + unmap_physmem(scratch_addr, MAP_NOCACHE); + + return ret; +} + +/* {address, size} */ +static const struct memory_bank memory_banks[] = { + {0x42000000, 0x01f00000}, +}; + +static const struct memory_bank +*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; + +phys_addr_t cfi_flash_bank_addr(int i) +{ + return flash_banks_list[i]->base; +} + +unsigned long cfi_flash_bank_size(int i) +{ + return flash_banks_list[i]->size; +} + +static void detect_num_flash_banks(void) +{ + const struct memory_bank *memory_bank, *end; + + cfi_flash_num_flash_banks = 0; + + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks); + + for (; memory_bank < end; memory_bank++) { + if (cfi_flash_num_flash_banks >= + CONFIG_SYS_MAX_FLASH_BANKS_DETECT) + break; + + if (mem_is_flash(memory_bank)) { + flash_banks_list[cfi_flash_num_flash_banks] = + memory_bank; + + debug("flash bank found: base = 0x%lx, size = 0x%lx\n", + memory_bank->base, memory_bank->size); + cfi_flash_num_flash_banks++; + } + } + + debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); +} +#else /* CONFIG_SYS_NO_FLASH */ +void detect_num_flash_banks(void) +{ +}; +#endif /* CONFIG_SYS_NO_FLASH */ + +void support_card_late_init(void) +{ + detect_num_flash_banks(); +} + +static const u8 ledval_num[] = { + 0x7e, /* 0 */ + 0x0c, /* 1 */ + 0xb6, /* 2 */ + 0x9e, /* 3 */ + 0xcc, /* 4 */ + 0xda, /* 5 */ + 0xfa, /* 6 */ + 0x4e, /* 7 */ + 0xfe, /* 8 */ + 0xde, /* 9 */ +}; + +static const u8 ledval_alpha[] = { + 0xee, /* A */ + 0xf8, /* B */ + 0x72, /* C */ + 0xbc, /* D */ + 0xf2, /* E */ + 0xe2, /* F */ + 0x7a, /* G */ + 0xe8, /* H */ + 0x08, /* I */ + 0x3c, /* J */ + 0xea, /* K */ + 0x70, /* L */ + 0x6e, /* M */ + 0xa8, /* N */ + 0xb8, /* O */ + 0xe6, /* P */ + 0xce, /* Q */ + 0xa0, /* R */ + 0xc8, /* S */ + 0x8c, /* T */ + 0x7c, /* U */ + 0x54, /* V */ + 0xfc, /* W */ + 0xec, /* X */ + 0xdc, /* Y */ + 0xa4, /* Z */ +}; + +static u8 char2ledval(char c) +{ + if (isdigit(c)) + return ledval_num[c - '0']; + else if (isalpha(c)) + return ledval_alpha[toupper(c) - 'A']; + + return 0; +} + +void led_puts(const char *s) +{ + int i; + u32 val = 0; + + if (!s) + return; + + for (i = 0; i < 4; i++) { + val <<= 8; + val |= char2ledval(*s); + if (*s != '\0') + s++; + } + + writel(~val, LED_BASE); +} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c deleted file mode 100644 index f833306030..0000000000 --- a/arch/arm/mach-uniphier/support_card.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Copyright (C) 2012-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#define MICRO_SUPPORT_CARD_RESET \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) -/* - * 0: reset deassert, 1: reset - * - * bit[0]: LAN, I2C, LED - * bit[1]: UART - */ -void support_card_reset_deassert(void) -{ - writel(0, MICRO_SUPPORT_CARD_RESET); -} - -void support_card_reset(void) -{ - writel(3, MICRO_SUPPORT_CARD_RESET); -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(MICRO_SUPPORT_CARD_REVISION); - printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); - return 0; -} - -int check_support_card(void) -{ - printf("SC: Micro Support Card "); - return support_card_show_revision(); -} - -void support_card_init(void) -{ - /* - * After power on, we need to keep the LAN controller in reset state - * for a while. (200 usec) - * Fortunately, enough wait time is already inserted in pll_init() - * function. So we do not have to wait here. - */ - support_card_reset_deassert(); -} - -#if defined(CONFIG_SMC911X) -#include - -int board_eth_init(bd_t *bis) -{ - return smc911x_initialize(0, CONFIG_SMC911X_BASE); -} -#endif - -#if !defined(CONFIG_SYS_NO_FLASH) - -#include -#include - -struct memory_bank { - phys_addr_t base; - unsigned long size; -}; - -static int mem_is_flash(const struct memory_bank *mem) -{ - const int loop = 128; - u32 *scratch_addr; - u32 saved_value; - int ret = 1; - int i; - - /* just in case, use the tail of the memory bank */ - scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, - sizeof(u32) * loop, MAP_NOCACHE); - - for (i = 0; i < loop; i++, scratch_addr++) { - saved_value = readl(scratch_addr); - writel(~saved_value, scratch_addr); - if (readl(scratch_addr) != saved_value) { - /* We assume no memory or SRAM here. */ - writel(saved_value, scratch_addr); - ret = 0; - break; - } - } - - unmap_physmem(scratch_addr, MAP_NOCACHE); - - return ret; -} - -/* {address, size} */ -static const struct memory_bank memory_banks[] = { - {0x42000000, 0x01f00000}, -}; - -static const struct memory_bank -*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; - -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]->base; -} - -unsigned long cfi_flash_bank_size(int i) -{ - return flash_banks_list[i]->size; -} - -static void detect_num_flash_banks(void) -{ - const struct memory_bank *memory_bank, *end; - - cfi_flash_num_flash_banks = 0; - - memory_bank = memory_banks; - end = memory_bank + ARRAY_SIZE(memory_banks); - - for (; memory_bank < end; memory_bank++) { - if (cfi_flash_num_flash_banks >= - CONFIG_SYS_MAX_FLASH_BANKS_DETECT) - break; - - if (mem_is_flash(memory_bank)) { - flash_banks_list[cfi_flash_num_flash_banks] = - memory_bank; - - debug("flash bank found: base = 0x%lx, size = 0x%lx\n", - memory_bank->base, memory_bank->size); - cfi_flash_num_flash_banks++; - } - } - - debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); -} -#else /* CONFIG_SYS_NO_FLASH */ -void detect_num_flash_banks(void) -{ -}; -#endif /* CONFIG_SYS_NO_FLASH */ - -void support_card_late_init(void) -{ - detect_num_flash_banks(); -} - -static const u8 ledval_num[] = { - 0x7e, /* 0 */ - 0x0c, /* 1 */ - 0xb6, /* 2 */ - 0x9e, /* 3 */ - 0xcc, /* 4 */ - 0xda, /* 5 */ - 0xfa, /* 6 */ - 0x4e, /* 7 */ - 0xfe, /* 8 */ - 0xde, /* 9 */ -}; - -static const u8 ledval_alpha[] = { - 0xee, /* A */ - 0xf8, /* B */ - 0x72, /* C */ - 0xbc, /* D */ - 0xf2, /* E */ - 0xe2, /* F */ - 0x7a, /* G */ - 0xe8, /* H */ - 0x08, /* I */ - 0x3c, /* J */ - 0xea, /* K */ - 0x70, /* L */ - 0x6e, /* M */ - 0xa8, /* N */ - 0xb8, /* O */ - 0xe6, /* P */ - 0xce, /* Q */ - 0xa0, /* R */ - 0xc8, /* S */ - 0x8c, /* T */ - 0x7c, /* U */ - 0x54, /* V */ - 0xfc, /* W */ - 0xec, /* X */ - 0xdc, /* Y */ - 0xa4, /* Z */ -}; - -static u8 char2ledval(char c) -{ - if (isdigit(c)) - return ledval_num[c - '0']; - else if (isalpha(c)) - return ledval_alpha[toupper(c) - 'A']; - - return 0; -} - -void led_puts(const char *s) -{ - int i; - u32 val = 0; - - if (!s) - return; - - for (i = 0; i < 4; i++) { - val <<= 8; - val |= char2ledval(*s); - if (*s != '\0') - s++; - } - - writel(~val, CONFIG_SUPPORT_CARD_LED_BASE); -} -- cgit From c8df23cf33571eda2cc22277a8f448e6221f8409 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:33 +0900 Subject: ARM: uniphier: allow to disable CONFIG_MICRO_SUPPORT_CARD Without this, build fails if CONFIG_MICRO_SUPPORT_CARD is disabled. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/spl.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index f0df9b1e4e..4c3cad3b88 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -13,6 +13,10 @@ void __weak bcu_init(void) { }; +void __weak sbc_init(void) +{ +}; + void __weak sg_init(void) { }; -- cgit From 8497ccc4c23beae38130489d85c97ae38058f20b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:34 +0900 Subject: ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_* I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify they belong to UniPhier SoC family. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Kconfig | 14 +++++++------- arch/arm/mach-uniphier/Makefile | 8 ++++---- arch/arm/mach-uniphier/include/mach/ddrphy-regs.h | 3 ++- arch/arm/mach-uniphier/include/mach/sc-regs.h | 2 +- arch/arm/mach-uniphier/ph1-pro4/pll_init.c | 2 -- 5 files changed, 14 insertions(+), 15 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 28d574fbb8..d7a19c6772 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -8,20 +8,20 @@ config UNIPHIER_SMP choice prompt "UniPhier SoC select" - default MACH_PH1_PRO4 + default ARCH_UNIPHIER_PH1_PRO4 -config MACH_PH1_SLD3 +config ARCH_UNIPHIER_PH1_SLD3 bool "PH1-sLD3" select UNIPHIER_SMP -config MACH_PH1_LD4 +config ARCH_UNIPHIER_PH1_LD4 bool "PH1-LD4" -config MACH_PH1_PRO4 +config ARCH_UNIPHIER_PH1_PRO4 bool "PH1-Pro4" select UNIPHIER_SMP -config MACH_PH1_SLD8 +config ARCH_UNIPHIER_PH1_SLD8 bool "PH1-sLD8" endchoice @@ -53,11 +53,11 @@ choice config DDR_FREQ_1600 bool "DDR3 1600" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4 + depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4 config DDR_FREQ_1333 bool "DDR3 1333" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8 + depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_SLD8 endchoice diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index df6a569b9a..d30cc27009 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -31,7 +31,7 @@ obj-y += timer.o obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o -obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += ph1-sld3/ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ph1-ld4/ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ph1-pro4/ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h index fce0c01246..01f5c52c9c 100644 --- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h +++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h @@ -156,7 +156,8 @@ struct ddrphy { /* SoC-specific parameters */ #define NR_DATX8_PER_DDRPHY 2 -#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) #define NR_DDRPHY_PER_CH 1 #else #define NR_DDRPHY_PER_CH 2 diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index df50294077..9d697b16ee 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -9,7 +9,7 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H -#if defined(CONFIG_MACH_PH1_SLD3) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) #define SC_BASE_ADDR 0xf1840000 #else #define SC_BASE_ADDR 0x61840000 diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c index d693368816..8ae8ed65b8 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c +++ b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c @@ -54,12 +54,10 @@ static void vpll_init(void) tmp = readl(SG_PINMON0); clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; -#if defined(CONFIG_MACH_PH1_PRO4) /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) return; -#endif /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ tmp = readl(SC_VPLL27ACTRL); -- cgit From 257b11f32d0ba451b8b7eba72f0db5e182d425dd Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:35 +0900 Subject: ARM: uniphier: delete unneeded input enable for low-level debug The UART I/O ports for PH1-Pro4 has no input enable controlling. This code is useless. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S index 19bef2a157..ce5dd4b15d 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -30,10 +30,5 @@ ENTRY(setup_lowlevel_debug) mov r1, #1 str r1, [r0] - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - mov pc, lr ENDPROC(setup_lowlevel_debug) -- cgit From fcbcd59730255018dbe78af9294598273a85a0de Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:36 +0900 Subject: ARM: uniphier: fix glitch signal problem for low-level debug Currently, IECTRL is enabled after pin-mux settings for the low-level debugging for PH1-LD4 and PH1-sLD8. While IECTRL is disabled, input signals are pulled-down, i.e. glitch signal (Low to High transition) problem occurs if pin-mux is set up first. As a result, one invalid character is input to the UART block and the auto-boot counting is terminated immediately. The correct initialization procedure is: [1] Enable IECTRL (if IECTRL exists for the pins) [2] Set up pin-muxing [3] Deassert the reset of the hardware block Currently, the low-level debugging is working for PH1-sLD3 and PH1-Pro4, but just in case, follow the sequence for all the SoCs. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S | 10 +++++----- arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 14 +++++++------- arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S | 6 +++--- arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S | 10 +++++----- 4 files changed, 20 insertions(+), 20 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S index fd393dcfb3..c0f14e08b1 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S @@ -14,16 +14,16 @@ #include ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] /* UART Port 0 */ sg_set_pinsel 85, 1, 8, 4, r0, r1 sg_set_pinsel 88, 1, 8, 4, r0, r1 - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] + init_debug_uart r0, r1, r2 mov pc, lr ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S index ce5dd4b15d..56f3851043 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S @@ -15,13 +15,6 @@ #include ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - /* UART Port 0 */ sg_set_pinsel 127, 0, 4, 8, r0, r1 sg_set_pinsel 128, 0, 4, 8, r0, r1 @@ -30,5 +23,12 @@ ENTRY(setup_lowlevel_debug) mov r1, #1 str r1, [r0] + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + init_debug_uart r0, r1, r2 + mov pc, lr ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S index ee2eae6bf7..f4eccb4612 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S @@ -15,6 +15,9 @@ #include ENTRY(setup_lowlevel_debug) + sg_set_pinsel 63, 0, 4, 4, r0, r1 + sg_set_pinsel 64, 1, 4, 4, r0, r1 + ldr r0, =BCSCR5 ldr r1, =0x24440000 str r1, [r0] @@ -26,8 +29,5 @@ ENTRY(setup_lowlevel_debug) init_debug_uart r0, r1, r2 - sg_set_pinsel 63, 0, 4, 4, r0, r1 - sg_set_pinsel 64, 1, 4, 4, r0, r1 - mov pc, lr ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S index 3ada4c9948..571ce60698 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S @@ -14,16 +14,16 @@ #include ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] /* UART Port 0 */ sg_set_pinsel 70, 3, 8, 4, r0, r1 sg_set_pinsel 71, 3, 8, 4, r0, r1 - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] + init_debug_uart r0, r1, r2 mov pc, lr ENDPROC(setup_lowlevel_debug) -- cgit From e6eecca54ffb99ee6877c0e29b0b389a481fcd85 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:37 +0900 Subject: ARM: uniphier: unify low-level debug init code Move init code of low-level debug into a single file. This is helpful to create an image that runs on multiple SoCs. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Makefile | 2 + arch/arm/mach-uniphier/debug_ll.S | 112 +++++++++++++++++++++++ arch/arm/mach-uniphier/include/mach/debug-uart.S | 23 ----- arch/arm/mach-uniphier/lowlevel_init.S | 2 +- arch/arm/mach-uniphier/ph1-ld4/Makefile | 1 - arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S | 29 ------ arch/arm/mach-uniphier/ph1-pro4/Makefile | 1 - arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S | 34 ------- arch/arm/mach-uniphier/ph1-sld3/Makefile | 1 - arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S | 33 ------- arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S | 29 ------ 11 files changed, 115 insertions(+), 152 deletions(-) create mode 100644 arch/arm/mach-uniphier/debug_ll.S delete mode 100644 arch/arm/mach-uniphier/include/mach/debug-uart.S delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index d30cc27009..5c2ccbd7a8 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -10,6 +10,8 @@ obj-y += spl.o obj-y += memconf.o obj-y += ddrphy_training.o +obj-$(CONFIG_DEBUG_LL) += debug_ll.o + else obj-y += late_lowlevel_init.o diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S new file mode 100644 index 0000000000..d5ccad3244 --- /dev/null +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -0,0 +1,112 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +#define BAUDRATE 115200 +#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) + +ENTRY(debug_ll_init) + ldr r0, =SG_REVISION + ldr r1, [r0] + and r1, r1, #SG_REVISION_TYPE_MASK + mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +#define PH1_SLD3_UART_CLK 36864000 + cmp r1, #0x25 + bne ph1_sld3_end + + sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =BCSCR5 + ldr r1, =0x24440000 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld3_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +#define PH1_LD4_UART_CLK 36864000 + cmp r1, #0x26 + bne ph1_ld4_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +#define PH1_PRO4_UART_CLK 73728000 + cmp r1, #0x28 + bne ph1_pro4_end + + sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +#define PH1_SLD8_UART_CLK 80000000 + cmp r1, #0x29 + bne ph1_sld8_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld8_end: +#endif + +init_uart: + addruart r0, r1, r2 + mov r1, #UART_LCR_WLEN8 << 8 + str r1, [r0, #0x10] + str r3, [r0, #0x24] + + mov pc, lr +ENDPROC(debug_ll_init) diff --git a/arch/arm/mach-uniphier/include/mach/debug-uart.S b/arch/arm/mach-uniphier/include/mach/debug-uart.S deleted file mode 100644 index d2b431f544..0000000000 --- a/arch/arm/mach-uniphier/include/mach/debug-uart.S +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#if !defined(CONFIG_DEBUG_SEMIHOSTING) -#include CONFIG_DEBUG_LL_INCLUDE -#endif - -#define BAUDRATE 115200 -#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) -#define DIVISOR DIV_ROUND(UART_CLK, 16 * BAUDRATE) - - .macro init_debug_uart, ra, rb, rc - addruart \ra, \rb, \rc - mov \rb, #UART_LCR_WLEN8 << 8 - str \rb, [\ra, #0x10] - ldr \rb, =DIVISOR - str \rb, [\ra, #0x24] - .endm diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index 9259bafed0..66cad42dde 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -27,7 +27,7 @@ ENTRY(lowlevel_init) mcr p15, 0, r0, c1, c0, 0 #ifdef CONFIG_DEBUG_LL - bl setup_lowlevel_debug + bl debug_ll_init #endif /* diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 4a2c944aee..4b9fe91fb0 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -3,7 +3,6 @@ # ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S deleted file mode 100644 index c0f14e08b1..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#define UART_CLK 36864000 -#include - -ENTRY(setup_lowlevel_debug) - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - /* UART Port 0 */ - sg_set_pinsel 85, 1, 8, 4, r0, r1 - sg_set_pinsel 88, 1, 8, 4, r0, r1 - - init_debug_uart r0, r1, r2 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index a52b5aa556..e8b2c9e8ac 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -3,7 +3,6 @@ # ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index 56f3851043..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define UART_CLK 73728000 -#include - -ENTRY(setup_lowlevel_debug) - /* UART Port 0 */ - sg_set_pinsel 127, 0, 4, 8, r0, r1 - sg_set_pinsel 128, 0, 4, 8, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile index e3cb39fa50..48a3756c1d 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -3,7 +3,6 @@ # ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ early_pinctrl.o pll_spectrum.o umc_init.o obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S deleted file mode 100644 index f4eccb4612..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#define UART_CLK 36864000 -#include - -ENTRY(setup_lowlevel_debug) - sg_set_pinsel 63, 0, 4, 4, r0, r1 - sg_set_pinsel 64, 1, 4, 4, r0, r1 - - ldr r0, =BCSCR5 - ldr r1, =0x24440000 - str r1, [r0] - - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S deleted file mode 100644 index 571ce60698..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#define UART_CLK 80000000 -#include - -ENTRY(setup_lowlevel_debug) - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - /* UART Port 0 */ - sg_set_pinsel 70, 3, 8, 4, r0, r1 - sg_set_pinsel 71, 3, 8, 4, r0, r1 - - init_debug_uart r0, r1, r2 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) -- cgit From 323d1f9d5bebfe55e97e23c8094055685665afef Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:39 +0900 Subject: ARM: uniphier: allow to enable multiple SoCs Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Kconfig | 45 ++--- arch/arm/mach-uniphier/Makefile | 16 +- arch/arm/mach-uniphier/bcu/Makefile | 3 + arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c | 34 ++++ arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c | 38 ++++ arch/arm/mach-uniphier/board_early_init_f.c | 42 ++++- arch/arm/mach-uniphier/boards.c | 93 ++++++++++ arch/arm/mach-uniphier/boot-mode/Makefile | 6 + .../mach-uniphier/boot-mode/boot-mode-ph1-ld4.c | 74 ++++++++ .../mach-uniphier/boot-mode/boot-mode-ph1-sld3.c | 106 +++++++++++ arch/arm/mach-uniphier/boot-mode/boot-mode.c | 35 ++++ arch/arm/mach-uniphier/clk/Makefile | 4 + arch/arm/mach-uniphier/clk/clk-ph1-ld4.c | 42 +++++ arch/arm/mach-uniphier/clk/clk-ph1-pro4.c | 57 ++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 31 ++-- arch/arm/mach-uniphier/ddrphy/Makefile | 3 + arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c | 72 ++++++++ arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c | 72 ++++++++ arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c | 77 ++++++++ arch/arm/mach-uniphier/ddrphy/ddrphy-training.c | 139 ++++++++++++++ arch/arm/mach-uniphier/ddrphy_training.c | 139 -------------- arch/arm/mach-uniphier/early-clk/Makefile | 4 + .../mach-uniphier/early-clk/early-clk-ph1-ld4.c | 33 ++++ arch/arm/mach-uniphier/early-pinctrl/Makefile | 1 + .../early-pinctrl/early-pinctrl-ph1-sld3.c | 26 +++ arch/arm/mach-uniphier/include/mach/boot-device.h | 11 +- arch/arm/mach-uniphier/include/mach/ddrphy-regs.h | 4 +- arch/arm/mach-uniphier/include/mach/init.h | 83 +++++++++ arch/arm/mach-uniphier/include/mach/sg-regs.h | 6 + arch/arm/mach-uniphier/include/mach/soc_info.h | 63 +++++++ arch/arm/mach-uniphier/init/Makefile | 6 + arch/arm/mach-uniphier/init/init-ph1-ld4.c | 60 ++++++ arch/arm/mach-uniphier/init/init-ph1-pro4.c | 58 ++++++ arch/arm/mach-uniphier/init/init-ph1-sld3.c | 53 ++++++ arch/arm/mach-uniphier/init/init-ph1-sld8.c | 60 ++++++ arch/arm/mach-uniphier/init/init.c | 46 +++++ arch/arm/mach-uniphier/memconf.c | 103 ----------- arch/arm/mach-uniphier/memconf/Makefile | 2 + arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c | 59 ++++++ arch/arm/mach-uniphier/memconf/memconf.c | 104 +++++++++++ arch/arm/mach-uniphier/ph1-ld4/Makefile | 13 -- arch/arm/mach-uniphier/ph1-ld4/bcu_init.c | 32 ---- arch/arm/mach-uniphier/ph1-ld4/boot-mode.c | 1 - arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c | 41 ----- arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c | 70 ------- arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-ld4/pinctrl.c | 48 ----- arch/arm/mach-uniphier/ph1-ld4/pll_init.c | 189 ------------------- arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c | 1 - arch/arm/mach-uniphier/ph1-ld4/sbc_init.c | 49 ----- arch/arm/mach-uniphier/ph1-ld4/umc_init.c | 171 ----------------- arch/arm/mach-uniphier/ph1-pro4/Makefile | 13 -- arch/arm/mach-uniphier/ph1-pro4/boot-mode.c | 65 ------- arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c | 56 ------ arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c | 70 ------- .../arm/mach-uniphier/ph1-pro4/early_clkrst_init.c | 30 --- arch/arm/mach-uniphier/ph1-pro4/pinctrl.c | 49 ----- arch/arm/mach-uniphier/ph1-pro4/pll_init.c | 149 --------------- arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c | 18 -- arch/arm/mach-uniphier/ph1-pro4/sbc_init.c | 42 ----- arch/arm/mach-uniphier/ph1-pro4/umc_init.c | 157 ---------------- arch/arm/mach-uniphier/ph1-sld3/Makefile | 13 -- arch/arm/mach-uniphier/ph1-sld3/bcu_init.c | 36 ---- arch/arm/mach-uniphier/ph1-sld3/boot-mode.c | 97 ---------- arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c | 1 - .../arm/mach-uniphier/ph1-sld3/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c | 23 --- arch/arm/mach-uniphier/ph1-sld3/memconf.c | 52 ------ arch/arm/mach-uniphier/ph1-sld3/pinctrl.c | 24 --- arch/arm/mach-uniphier/ph1-sld3/pll_init.c | 10 - arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c | 18 -- arch/arm/mach-uniphier/ph1-sld3/sbc_init.c | 45 ----- arch/arm/mach-uniphier/ph1-sld3/sg_init.c | 9 - arch/arm/mach-uniphier/ph1-sld3/umc_init.c | 15 -- arch/arm/mach-uniphier/ph1-sld8/Makefile | 1 - arch/arm/mach-uniphier/ph1-sld8/bcu_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/boot-mode.c | 1 - arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c | 75 -------- .../arm/mach-uniphier/ph1-sld8/early_clkrst_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/pinctrl.c | 42 ----- arch/arm/mach-uniphier/ph1-sld8/pll_init.c | 201 -------------------- arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c | 1 - arch/arm/mach-uniphier/ph1-sld8/sbc_init.c | 1 - arch/arm/mach-uniphier/ph1-sld8/umc_init.c | 151 --------------- arch/arm/mach-uniphier/pinctrl/Makefile | 4 + arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c | 49 +++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c | 50 +++++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c | 25 +++ arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c | 43 +++++ arch/arm/mach-uniphier/pll/Makefile | 8 + arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c | 203 ++++++++++++++++++++ arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c | 163 ++++++++++++++++ arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c | 13 ++ arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c | 204 +++++++++++++++++++++ arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c | 20 ++ arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c | 21 +++ arch/arm/mach-uniphier/sbc/Makefile | 4 + arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c | 52 ++++++ arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c | 45 +++++ arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c | 48 +++++ arch/arm/mach-uniphier/soc_info.c | 61 ++++++ arch/arm/mach-uniphier/spl.c | 87 --------- arch/arm/mach-uniphier/umc/Makefile | 3 + arch/arm/mach-uniphier/umc/umc-ph1-ld4.c | 175 ++++++++++++++++++ arch/arm/mach-uniphier/umc/umc-ph1-pro4.c | 161 ++++++++++++++++ arch/arm/mach-uniphier/umc/umc-ph1-sld8.c | 155 ++++++++++++++++ 107 files changed, 3114 insertions(+), 2475 deletions(-) create mode 100644 arch/arm/mach-uniphier/bcu/Makefile create mode 100644 arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/boards.c create mode 100644 arch/arm/mach-uniphier/boot-mode/Makefile create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode.c create mode 100644 arch/arm/mach-uniphier/clk/Makefile create mode 100644 arch/arm/mach-uniphier/clk/clk-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/clk/clk-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/ddrphy/Makefile create mode 100644 arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/ddrphy/ddrphy-training.c delete mode 100644 arch/arm/mach-uniphier/ddrphy_training.c create mode 100644 arch/arm/mach-uniphier/early-clk/Makefile create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/early-pinctrl/Makefile create mode 100644 arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/include/mach/init.h create mode 100644 arch/arm/mach-uniphier/include/mach/soc_info.h create mode 100644 arch/arm/mach-uniphier/init/Makefile create mode 100644 arch/arm/mach-uniphier/init/init-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/init/init.c delete mode 100644 arch/arm/mach-uniphier/memconf.c create mode 100644 arch/arm/mach-uniphier/memconf/Makefile create mode 100644 arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/memconf/memconf.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/bcu_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/pll_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/umc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/pll_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/umc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/bcu_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/memconf.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/pll_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sbc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sg_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/umc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/Makefile delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/bcu_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/boot-mode.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/pll_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/umc_init.c create mode 100644 arch/arm/mach-uniphier/pinctrl/Makefile create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/pll/Makefile create mode 100644 arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c create mode 100644 arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/sbc/Makefile create mode 100644 arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c create mode 100644 arch/arm/mach-uniphier/soc_info.c delete mode 100644 arch/arm/mach-uniphier/spl.c create mode 100644 arch/arm/mach-uniphier/umc/Makefile create mode 100644 arch/arm/mach-uniphier/umc/umc-ph1-ld4.c create mode 100644 arch/arm/mach-uniphier/umc/umc-ph1-pro4.c create mode 100644 arch/arm/mach-uniphier/umc/umc-ph1-sld8.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index d7a19c6772..2cc5dac070 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -6,25 +6,32 @@ config SYS_CONFIG_NAME config UNIPHIER_SMP bool -choice - prompt "UniPhier SoC select" - default ARCH_UNIPHIER_PH1_PRO4 - config ARCH_UNIPHIER_PH1_SLD3 - bool "PH1-sLD3" + bool "UniPhier PH1-sLD3 SoC" select UNIPHIER_SMP + help + This enables support for UniPhier PH1-sLD3 SoC. config ARCH_UNIPHIER_PH1_LD4 - bool "PH1-LD4" + bool "UniPhier PH1-LD4 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-LD4 SoC. config ARCH_UNIPHIER_PH1_PRO4 - bool "PH1-Pro4" + bool "UniPhier PH1-Pro4 SoC" select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro4 SoC. config ARCH_UNIPHIER_PH1_SLD8 - bool "PH1-sLD8" - -endchoice + bool "UniPhier PH1-sLD8 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-sLD8 SoC. config MICRO_SUPPORT_CARD bool "Use Micro Support Card" @@ -48,22 +55,4 @@ config CMD_DDRPHY_DUMP The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. -choice - prompt "DDR3 Frequency select" - -config DDR_FREQ_1600 - bool "DDR3 1600" - depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4 - -config DDR_FREQ_1333 - bool "DDR3 1333" - depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_SLD8 - -endchoice - -config DDR_FREQ - int - default 1333 if DDR_FREQ_1333 - default 1600 if DDR_FREQ_1600 - endif diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 5c2ccbd7a8..b597a1352c 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -6,9 +6,10 @@ ifdef CONFIG_SPL_BUILD obj-y += lowlevel_init.o obj-y += init_page_table.o -obj-y += spl.o -obj-y += memconf.o -obj-y += ddrphy_training.o +obj-y += boards.o + +obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ umc/ ddrphy/ +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/ obj-$(CONFIG_DEBUG_LL) += debug_ll.o @@ -27,13 +28,12 @@ obj-y += cache_uniphier.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o +obj-y += pinctrl/ clk/ + endif obj-y += timer.o +obj-y += soc_info.o +obj-y += boot-mode/ obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o - -obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += ph1-sld3/ -obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ph1-sld8/ diff --git a/arch/arm/mach-uniphier/bcu/Makefile b/arch/arm/mach-uniphier/bcu/Makefile new file mode 100644 index 0000000000..5b95bdad95 --- /dev/null +++ b/arch/arm/mach-uniphier/bcu/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += bcu-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += bcu-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += bcu-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c new file mode 100644 index 0000000000..e9d3761fde --- /dev/null +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd) +{ + int shift; + + writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ + + /* Specify DDR channel */ + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c new file mode 100644 index 0000000000..cb6f862721 --- /dev/null +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) + +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd) +{ + int shift; + + writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ + writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ + /* + * 0xe0000000-0xefffffff: Ex-bus + * 0xf0000000-0xfbffffff: ASM bus + * 0xfc000000-0xffffffff: OCM bus + */ + writel(0x24440000, BCSCR5); + + /* Specify DDR channel */ + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; + writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ + + shift -= 32; + writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index 45f5cea433..cd516c3121 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -4,20 +4,46 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include #include - -void pin_init(void); -void clkrst_init(void); +#include int board_early_init_f(void) { led_puts("U0"); - pin_init(); - - led_puts("U1"); - - clkrst_init(); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_pin_init(); + led_puts("U1"); + ph1_pro4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif + default: + break; + } led_puts("U2"); diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c new file mode 100644 index 0000000000..6a5ea2e585 --- /dev/null +++ b/arch/arm/mach-uniphier/boards.c @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +static const struct uniphier_board_data ph1_sld3_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 16, + .dram_ch2_base = 0xc0000000, + .dram_ch2_size = 0x10000000, + .dram_ch2_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +static const struct uniphier_board_data ph1_ld4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +static const struct uniphier_board_data ph1_pro4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +static const struct uniphier_board_data ph1_sld8_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1333, +}; +#endif + +struct uniphier_board_id { + const char *compatible; + const struct uniphier_board_data *param; +}; + +static const struct uniphier_board_id uniphier_boards[] = { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + { "socionext,ph1-sld3", &ph1_sld3_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + { "socionext,ph1-ld4", &ph1_ld4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + { "socionext,ph1-pro4", &ph1_pro4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + { "socionext,ph1-sld8", &ph1_sld8_data, }, +#endif +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) { + if (!fdt_node_check_compatible(fdt, 0, + uniphier_boards[i].compatible)) + return uniphier_boards[i].param; + } + + return NULL; +} diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile new file mode 100644 index 0000000000..bd6d0a3d7c --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -0,0 +1,6 @@ +obj-y += boot-mode.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c new file mode 100644 index 0000000000..f974d9f08d --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, +}; + +static int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 ph1_ld4_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_ld4_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c new file mode 100644 index 0000000000..c943e12db1 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "External Master"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Boot Oparation)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (3.3V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC (1.8V, Normal)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, +}; + +static int get_boot_mode_sel(void) +{ + return readl(SG_PINMON0) & 0x3f; +} + +u32 ph1_sld3_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_sld3_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c new file mode 100644 index 0000000000..71abdef1f4 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +u32 spl_boot_device(void) +{ + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + return ph1_sld3_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + return ph1_ld4_boot_device(); +#endif + default: + return BOOT_DEVICE_NONE; + } +} diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile new file mode 100644 index 0000000000..e6931d6461 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c new file mode 100644 index 0000000000..8b95fbb008 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_ld4_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c new file mode 100644 index 0000000000..2e1b20a423 --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_pro4_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 | + SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index 8be2ed4fe6..a61d40e6c5 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -1,6 +1,5 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,20 +7,30 @@ #include #include #include +#include static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int mode_sel, i; - printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); - mode_sel = get_boot_mode_sel(); - - puts("Boot Mode Pin:\n"); - - for (i = 0; boot_device_table[i].info; i++) - printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, - boot_device_table[i].info); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + ph1_ld4_boot_mode_show(); + break; +#endif + default: + break; + } return 0; } diff --git a/arch/arm/mach-uniphier/ddrphy/Makefile b/arch/arm/mach-uniphier/ddrphy/Makefile new file mode 100644 index 0000000000..e2d109df57 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ddrphy-training.o ddrphy-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ddrphy-training.o ddrphy-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ddrphy-training.o ddrphy-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c new file mode 100644 index 0000000000..991d9294fd --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8253c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a82dbc0, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000800, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; +} diff --git a/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c new file mode 100644 index 0000000000..bc47ba3280 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + + writel(0x00000000, &phy->mr3); + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; +} diff --git a/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c new file mode 100644 index 0000000000..39024a09d5 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2014-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +{ + u32 tmp; + + writel(0x0300c473, &phy->pgcr[1]); + if (freq == 1333) { + writel(0x0a806844, &phy->ptr[0]); + writel(0x208e0124, &phy->ptr[1]); + } else { + writel(0x0c807d04, &phy->ptr[0]); + writel(0x2710015E, &phy->ptr[1]); + } + writel(0x00083DEF, &phy->ptr[2]); + if (freq == 1333) { + writel(0x0f051616, &phy->ptr[3]); + writel(0x06ae08d6, &phy->ptr[4]); + } else { + writel(0x12061A80, &phy->ptr[3]); + writel(0x08027100, &phy->ptr[4]); + } + writel(0xF004001A, &phy->dsgcr); + + /* change the value of the on-die pull-up/pull-down registors */ + tmp = readl(&phy->dxccr); + tmp &= ~0x0ee0; + tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; + writel(tmp, &phy->dxccr); + + writel(0x0000040B, &phy->dcr); + if (freq == 1333) { + writel(0x85589955, &phy->dtpr[0]); + if (size == 1) + writel(0x1a8363c0, &phy->dtpr[1]); + else + writel(0x1a8363c0, &phy->dtpr[1]); + writel(0x5002c200, &phy->dtpr[2]); + writel(0x00000b51, &phy->mr0); + } else { + writel(0x999cbb66, &phy->dtpr[0]); + if (size == 1) + writel(0x1a878400, &phy->dtpr[1]); + else + writel(0x1a878400, &phy->dtpr[1]); + writel(0xa00214f8, &phy->dtpr[2]); + writel(0x00000d71, &phy->mr0); + } + writel(0x00000006, &phy->mr1); + if (freq == 1333) + writel(0x00000290, &phy->mr2); + else + writel(0x00000298, &phy->mr2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, &phy->mr3); +#else + writel(0x00000800, &phy->mr3); +#endif + + while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) + ; + + writel(0x0300C473, &phy->pgcr[1]); + writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; +} diff --git a/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c new file mode 100644 index 0000000000..a98b814df0 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) +{ + int dx; + u32 __iomem tmp, *p; + + for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { + p = &phy->dx[dx].gcr; + + tmp = readl(p); + /* Specify the rank that should be write leveled */ + tmp &= ~DXGCR_WLRKEN_MASK; + tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; + writel(tmp, p); + } + + p = &phy->dtcr; + + tmp = readl(p); + /* Specify the rank used during data bit deskew and eye centering */ + tmp &= ~DTCR_DTRANK_MASK; + tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; + /* Use Multi-Purpose Register for DQS gate training */ + tmp |= DTCR_DTMPR; + /* Specify the rank enabled for data-training */ + tmp &= ~DTCR_RNKEN_MASK; + tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; + writel(tmp, p); +} + +struct ddrphy_init_sequence { + char *description; + u32 init_flag; + u32 done_flag; + u32 err_flag; +}; + +static struct ddrphy_init_sequence init_sequence[] = { + { + "DRAM Initialization", + PIR_DRAMRST | PIR_DRAMINIT, + PGSR0_DIDONE, + PGSR0_DIERR + }, + { + "Write Leveling", + PIR_WL, + PGSR0_WLDONE, + PGSR0_WLERR + }, + { + "Read DQS Gate Training", + PIR_QSGATE, + PGSR0_QSGDONE, + PGSR0_QSGERR + }, + { + "Write Leveling Adjustment", + PIR_WLADJ, + PGSR0_WLADONE, + PGSR0_WLAERR + }, + { + "Read Bit Deskew", + PIR_RDDSKW, + PGSR0_RDDONE, + PGSR0_RDERR + }, + { + "Write Bit Deskew", + PIR_WRDSKW, + PGSR0_WDDONE, + PGSR0_WDERR + }, + { + "Read Eye Training", + PIR_RDEYE, + PGSR0_REDONE, + PGSR0_REERR + }, + { + "Write Eye Training", + PIR_WREYE, + PGSR0_WEDONE, + PGSR0_WEERR + } +}; + +int ddrphy_training(struct ddrphy __iomem *phy) +{ + int i; + u32 pgsr0; + u32 init_flag = PIR_INIT; + u32 done_flag = PGSR0_IDONE; + int timeout = 50000; /* 50 msec is long enough */ +#ifdef DISPLAY_ELAPSED_TIME + ulong start = get_timer(0); +#endif + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + init_flag |= init_sequence[i].init_flag; + done_flag |= init_sequence[i].done_flag; + } + + writel(init_flag, &phy->pir); + + do { + if (--timeout < 0) { + printf("%s: error: timeout during DDR training\n", + __func__); + return -1; + } + udelay(1); + pgsr0 = readl(&phy->pgsr[0]); + } while ((pgsr0 & done_flag) != done_flag); + + for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { + if (pgsr0 & init_sequence[i].err_flag) { + printf("%s: error: %s failed\n", __func__, + init_sequence[i].description); + return -1; + } + } + +#ifdef DISPLAY_ELAPSED_TIME + printf("%s: info: elapsed time %ld msec\n", get_timer(start)); +#endif + + return 0; +} diff --git a/arch/arm/mach-uniphier/ddrphy_training.c b/arch/arm/mach-uniphier/ddrphy_training.c deleted file mode 100644 index a98b814df0..0000000000 --- a/arch/arm/mach-uniphier/ddrphy_training.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank) -{ - int dx; - u32 __iomem tmp, *p; - - for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) { - p = &phy->dx[dx].gcr; - - tmp = readl(p); - /* Specify the rank that should be write leveled */ - tmp &= ~DXGCR_WLRKEN_MASK; - tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK; - writel(tmp, p); - } - - p = &phy->dtcr; - - tmp = readl(p); - /* Specify the rank used during data bit deskew and eye centering */ - tmp &= ~DTCR_DTRANK_MASK; - tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK; - /* Use Multi-Purpose Register for DQS gate training */ - tmp |= DTCR_DTMPR; - /* Specify the rank enabled for data-training */ - tmp &= ~DTCR_RNKEN_MASK; - tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK; - writel(tmp, p); -} - -struct ddrphy_init_sequence { - char *description; - u32 init_flag; - u32 done_flag; - u32 err_flag; -}; - -static struct ddrphy_init_sequence init_sequence[] = { - { - "DRAM Initialization", - PIR_DRAMRST | PIR_DRAMINIT, - PGSR0_DIDONE, - PGSR0_DIERR - }, - { - "Write Leveling", - PIR_WL, - PGSR0_WLDONE, - PGSR0_WLERR - }, - { - "Read DQS Gate Training", - PIR_QSGATE, - PGSR0_QSGDONE, - PGSR0_QSGERR - }, - { - "Write Leveling Adjustment", - PIR_WLADJ, - PGSR0_WLADONE, - PGSR0_WLAERR - }, - { - "Read Bit Deskew", - PIR_RDDSKW, - PGSR0_RDDONE, - PGSR0_RDERR - }, - { - "Write Bit Deskew", - PIR_WRDSKW, - PGSR0_WDDONE, - PGSR0_WDERR - }, - { - "Read Eye Training", - PIR_RDEYE, - PGSR0_REDONE, - PGSR0_REERR - }, - { - "Write Eye Training", - PIR_WREYE, - PGSR0_WEDONE, - PGSR0_WEERR - } -}; - -int ddrphy_training(struct ddrphy __iomem *phy) -{ - int i; - u32 pgsr0; - u32 init_flag = PIR_INIT; - u32 done_flag = PGSR0_IDONE; - int timeout = 50000; /* 50 msec is long enough */ -#ifdef DISPLAY_ELAPSED_TIME - ulong start = get_timer(0); -#endif - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - init_flag |= init_sequence[i].init_flag; - done_flag |= init_sequence[i].done_flag; - } - - writel(init_flag, &phy->pir); - - do { - if (--timeout < 0) { - printf("%s: error: timeout during DDR training\n", - __func__); - return -1; - } - udelay(1); - pgsr0 = readl(&phy->pgsr[0]); - } while ((pgsr0 & done_flag) != done_flag); - - for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { - if (pgsr0 & init_sequence[i].err_flag) { - printf("%s: error: %s failed\n", __func__, - init_sequence[i].description); - return -1; - } - } - -#ifdef DISPLAY_ELAPSED_TIME - printf("%s: info: elapsed time %ld msec\n", get_timer(start)); -#endif - - return 0; -} diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile new file mode 100644 index 0000000000..58af1add58 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c new file mode 100644 index 0000000000..f646c9b7df --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); + + tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0; + if (spl_boot_device() != BOOT_DEVICE_NAND) + tmp &= ~SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/early-pinctrl/Makefile b/arch/arm/mach-uniphier/early-pinctrl/Makefile new file mode 100644 index 0000000000..e497d28f79 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-pinctrl-ph1-sld3.o diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..1bb9375016 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ + sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ + + sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ + sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ + + sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ + sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ +#endif + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index 7a10f1c5b2..eddb25ffa4 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2011-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,13 +7,15 @@ #ifndef _ASM_BOOT_DEVICE_H_ #define _ASM_BOOT_DEVICE_H_ -int get_boot_mode_sel(void); - struct boot_device_info { u32 type; char *info; }; -extern struct boot_device_info boot_device_table[]; +u32 ph1_sld3_boot_device(void); +u32 ph1_ld4_boot_device(void); + +void ph1_sld3_boot_mode_show(void); +void ph1_ld4_boot_mode_show(void); #endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h index 01f5c52c9c..adcc972877 100644 --- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h +++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h @@ -168,7 +168,9 @@ struct ddrphy { #define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy)) #ifndef __ASSEMBLY__ -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank); int ddrphy_training(struct ddrphy __iomem *phy); #endif diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h new file mode 100644 index 0000000000..228cbb1a19 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_INIT_H +#define __MACH_INIT_H + +struct uniphier_board_data { + unsigned long dram_ch0_base; + unsigned long dram_ch0_size; + unsigned long dram_ch0_width; + unsigned long dram_ch1_base; + unsigned long dram_ch1_size; + unsigned long dram_ch1_width; + unsigned long dram_ch2_base; + unsigned long dram_ch2_size; + unsigned long dram_ch2_width; + unsigned int dram_freq; +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt); + +int ph1_sld3_init(const struct uniphier_board_data *bd); +int ph1_ld4_init(const struct uniphier_board_data *bd); +int ph1_pro4_init(const struct uniphier_board_data *bd); +int ph1_sld8_init(const struct uniphier_board_data *bd); + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd); +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd); +#else +static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} +#endif + +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd); +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd); + +int memconf_init(const struct uniphier_board_data *bd); +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd); + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd); +int ph1_ld4_pll_init(const struct uniphier_board_data *bd); +int ph1_pro4_pll_init(const struct uniphier_board_data *bd); +int ph1_sld8_pll_init(const struct uniphier_board_data *bd); + +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); + +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); + +int ph1_ld4_umc_init(const struct uniphier_board_data *bd); +int ph1_pro4_umc_init(const struct uniphier_board_data *bd); +int ph1_sld8_umc_init(const struct uniphier_board_data *bd); + +void ph1_sld3_pin_init(void); +void ph1_ld4_pin_init(void); +void ph1_pro4_pin_init(void); +void ph1_sld8_pin_init(void); + +void ph1_ld4_clk_init(void); +void ph1_pro4_clk_init(void); + +#define pr_err(fmt, args...) printf(fmt, ##args) + +#endif /* __MACH_INIT_H */ diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index c886e1c655..d8239f28bc 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -25,26 +25,32 @@ /* Memory Configuration */ #define SG_MEMCONF (SG_CTRL_BASE | 0x0400) +#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) #define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) #define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8) #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) +#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) #define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) #define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9) #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) +#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) #define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) #define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) +#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) diff --git a/arch/arm/mach-uniphier/include/mach/soc_info.h b/arch/arm/mach-uniphier/include/mach/soc_info.h new file mode 100644 index 0000000000..623e7ef20e --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/soc_info.h @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_SOC_INFO_H__ +#define __MACH_SOC_INFO_H__ + +enum uniphier_soc_id { + SOC_UNIPHIER_PH1_SLD3, + SOC_UNIPHIER_PH1_LD4, + SOC_UNIPHIER_PH1_PRO4, + SOC_UNIPHIER_PH1_SLD8, + SOC_UNIPHIER_PH1_PRO5, + SOC_UNIPHIER_PROXSTREAM2, + SOC_UNIPHIER_PH1_LD6B, + SOC_UNIPHIER_UNKNOWN, +}; + +#define UNIPHIER_NR_ENABLED_SOCS \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + +#define UNIPHIER_MULTI_SOC ((UNIPHIER_NR_ENABLED_SOCS) > 1) + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void); +#else +static inline enum uniphier_soc_id uniphier_get_soc_type(void) +{ +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + return SOC_UNIPHIER_PH1_SLD3; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + return SOC_UNIPHIER_PH1_LD4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + return SOC_UNIPHIER_PH1_PRO4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + return SOC_UNIPHIER_PH1_SLD8; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + return SOC_UNIPHIER_PH1_PRO5; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + return SOC_UNIPHIER_PROXSTREAM2; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + return SOC_UNIPHIER_PH1_LD6B; +#endif + + return SOC_UNIPHIER_UNKNOWN; +} +#endif + +#endif /* __MACH_SOC_INFO_H__ */ diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile new file mode 100644 index 0000000000..dd9804d33b --- /dev/null +++ b/arch/arm/mach-uniphier/init/Makefile @@ -0,0 +1,6 @@ +obj-y += init.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/init/init-ph1-ld4.c b/arch/arm/mach-uniphier/init/init-ph1-ld4.c new file mode 100644 index 0000000000..8d0ef0389e --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-ld4.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_ld4_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_ld4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_ld4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro4.c b/arch/arm/mach-uniphier/init/init-ph1-pro4.c new file mode 100644 index 0000000000..b9ce08d88f --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro4.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_pro4_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + ph1_pro4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_pro4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld3.c b/arch/arm/mach-uniphier/init/init-ph1-sld3.c new file mode 100644 index 0000000000..1146fdab97 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld3.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_sld3_init(const struct uniphier_board_data *bd) +{ + ph1_sld3_bcu_init(bd); + + ph1_sld3_sbc_init(bd); + + support_card_reset(); + + ph1_sld3_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + ph1_sld3_memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + ph1_sld3_early_pin_init(bd); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + ph1_sld3_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld8.c b/arch/arm/mach-uniphier/init/init-ph1-sld8.c new file mode 100644 index 0000000000..741e88c212 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld8.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_sld8_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_sld8_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_sld8_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c new file mode 100644 index 0000000000..316be029ae --- /dev/null +++ b/arch/arm/mach-uniphier/init/init.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void spl_board_init(void) +{ + const struct uniphier_board_data *param; + + param = uniphier_get_board_param(gd->fdt_blob); + if (!param) + hang(); + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_init(param); + break; +#endif + default: + break; + } +} diff --git a/arch/arm/mach-uniphier/memconf.c b/arch/arm/mach-uniphier/memconf.c deleted file mode 100644 index 59ed0b5dd8..0000000000 --- a/arch/arm/mach-uniphier/memconf.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static inline u32 sg_memconf_val_ch0(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH0_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH0_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH0_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH0_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH0_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH0_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH0_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -static inline u32 sg_memconf_val_ch1(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH1_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH1_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH1_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH1_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH1_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH1_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH1_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -void memconf_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); -} diff --git a/arch/arm/mach-uniphier/memconf/Makefile b/arch/arm/mach-uniphier/memconf/Makefile new file mode 100644 index 0000000000..1a718f31fa --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/Makefile @@ -0,0 +1,2 @@ +obj-y += memconf.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o diff --git a/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c new file mode 100644 index 0000000000..e13f56d1dc --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/memconf/memconf.c b/arch/arm/mach-uniphier/memconf/memconf.c new file mode 100644 index 0000000000..d490736fa4 --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +int memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp = 0; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH0_SZ_MASK | SG_MEMCONF_CH0_NUM_MASK); + + switch (bd->dram_ch0_width) { + case 16: + tmp |= SG_MEMCONF_CH0_NUM_1; + size_per_word = bd->dram_ch0_size; + break; + case 32: + tmp |= SG_MEMCONF_CH0_NUM_2; + size_per_word = bd->dram_ch0_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch0 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH0_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH0_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH0_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH0_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH0_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch0 size\n"); + return -EINVAL; + } + + tmp &= ~(SG_MEMCONF_CH1_SZ_MASK | SG_MEMCONF_CH1_NUM_MASK); + + switch (bd->dram_ch1_width) { + case 16: + tmp |= SG_MEMCONF_CH1_NUM_1; + size_per_word = bd->dram_ch1_size; + break; + case 32: + tmp |= SG_MEMCONF_CH1_NUM_2; + size_per_word = bd->dram_ch1_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch1 width\n"); + return -EINVAL; + } + + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH1_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH1_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH1_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH1_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH1_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch1 size\n"); + return -EINVAL; + } + + if (bd->dram_ch0_base + bd->dram_ch0_size < bd->dram_ch1_base) + tmp |= SG_MEMCONF_SPARSEMEM; + else + tmp &= ~SG_MEMCONF_SPARSEMEM; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile deleted file mode 100644 index 4b9fe91fb0..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c deleted file mode 100644 index a7bc15e7e0..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) - -void bcu_init(void) -{ - int shift; - - writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */ - writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ - - /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; - writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c deleted file mode 100644 index 2de81f0a56..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); -#ifdef CONFIG_UNIPHIER_ETH - tmp |= SC_RSTCTRL_NRST_ETHER; -#endif -#ifdef CONFIG_USB_EHCI_UNIPHIER - tmp |= SC_RSTCTRL_NRST_STDMAC; -#endif -#ifdef CONFIG_NAND_DENALI - tmp |= SC_RSTCTRL_NRST_NAND; -#endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); -#ifdef CONFIG_UNIPHIER_ETH - tmp |= SC_CLKCTRL_CEN_ETHER; -#endif -#ifdef CONFIG_USB_EHCI_UNIPHIER - tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC; -#endif -#ifdef CONFIG_NAND_DENALI - tmp |= SC_CLKCTRL_CEN_NAND; -#endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c deleted file mode 100644 index 2add8fa691..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8253c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a82dbc0, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000800, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c deleted file mode 100644 index 293a6ab423..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void pin_init(void) -{ - u32 tmp; - - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ -#endif - - tmp = readl(SG_IECTRL); - tmp |= 0x41; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/ph1-ld4/pll_init.c deleted file mode 100644 index f8ec2b61fb..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT (DPLLCTRL.bit[29:20]) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif - -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~SC_DPLLCTRL_SSC_RATE; -#else - tmp |= SC_DPLLCTRL_SSC_RATE; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c deleted file mode 100644 index 837b2a891b..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c deleted file mode 100644 index 4435a47e73..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. - * - * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank - * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x40000000-0x41ffffff: mask ROM - * 0x42000000-0x43efffff: memory bank (31MB) - * 0x43f00000-0x43ffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/ph1-ld4/umc_init.c deleted file mode 100644 index a7a4157e79..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - if (freq == 1333) { - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x000FF0FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - } else if (freq == 1600) { - writel(0x36BB0F17, dramcont + UMC_CMDCTLA); - writel(0x18C6AA24, dramcont + UMC_CMDCTLB); - writel(0x5101387F, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x2F030D3F, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x43030D3F, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - } - - writel(0x00000006, dramcont + UMC_DRMMR1); - - if (freq == 1333) - writel(0x00000290, dramcont + UMC_DRMMR2); - else if (freq == 1600) - writel(0x00000298, dramcont + UMC_DRMMR2); - - writel(0x00000800, dramcont + UMC_DRMMR3); - - if (freq == 1333) { - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - } else if (freq == 1600) { - if (size == 1) - writel(0x002B0617, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x003F0617, dramcont + UMC_SPCCTLA); - - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - } - - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile deleted file mode 100644 index e8b2c9e8ac..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += pll_init.o early_clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c deleted file mode 100644 index 54a2510b97..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct boot_device_info boot_device_table[] = { - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } -}; - -int get_boot_mode_sel(void) -{ - return (readl(SG_PINMON0) >> 1) & 0x1f; -} - -u32 spl_boot_device(void) -{ - int boot_mode; - - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - - boot_mode = get_boot_mode_sel(); - - return boot_device_table[boot_mode].type; -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c deleted file mode 100644 index 46cace77e5..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); -#ifdef CONFIG_USB_XHCI_UNIPHIER - tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 | - SC_RSTCTRL_NRST_GIO; -#endif -#ifdef CONFIG_UNIPHIER_ETH - tmp |= SC_RSTCTRL_NRST_ETHER; -#endif -#ifdef CONFIG_USB_EHCI_UNIPHIER - tmp |= SC_RSTCTRL_NRST_STDMAC; -#endif -#ifdef CONFIG_NAND_DENALI - tmp |= SC_RSTCTRL_NRST_NAND; -#endif - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - -#ifdef CONFIG_USB_XHCI_UNIPHIER - tmp = readl(SC_RSTCTRL2); - tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1; - writel(tmp, SC_RSTCTRL2); - readl(SC_RSTCTRL2); /* dummy read */ -#endif - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); -#ifdef CONFIG_USB_XHCI_UNIPHIER - tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | - SC_CLKCTRL_CEN_GIO; -#endif -#ifdef CONFIG_UNIPHIER_ETH - tmp |= SC_CLKCTRL_CEN_ETHER; -#endif -#ifdef CONFIG_USB_EHCI_UNIPHIER - tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC; -#endif -#ifdef CONFIG_NAND_DENALI - tmp |= SC_CLKCTRL_CEN_NAND; -#endif - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c deleted file mode 100644 index 61ddcf4ec6..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000000, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c deleted file mode 100644 index 60204b53ba..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void early_clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - - tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0; - if (spl_boot_device() != BOOT_DEVICE_NAND) - tmp &= ~SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index bfaff4fea9..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ - /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ - /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ -#endif - -#ifdef CONFIG_USB_XHCI_UNIPHIER - sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ - sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c deleted file mode 100644 index 8ae8ed65b8..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT ( DPLLCTRL.bit[29:20] ) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif - - /* - * Set Moduration rate - * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) - */ -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~0x00008000; -#else - tmp |= 0x00008000; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - /* Set VPLL27A & VPLL27B */ - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) - return; - - /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { - /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* wait 1 usec */ - udelay(1); - - /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 1 usec in vpll_init() so 1 usec can be saved here. - */ - udelay(499); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c deleted file mode 100644 index fcf2ad282a..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void enable_dpll_ssc(void) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c deleted file mode 100644 index 685f9c736c..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. - * - * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank - * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x40000000-0x41ffffff: mask ROM - * 0x42000000-0x43efffff: memory bank (31MB) - * 0x43f00000-0x43ffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c deleted file mode 100644 index bd8b9d83b2..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000001, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x07ffffff, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - - writel(0x03010100, ssif_base + UMC_HDMCHSEL); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DVCCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_HDMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_HDDRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_GIORST); - writel(0x00000001, ssif_base + UMC_HD2RST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_DVCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_VPERST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - writel(0x66bb0f17, dramcont + UMC_CMDCTLA); - writel(0x18c6aa44, dramcont + UMC_CMDCTLB); - writel(0x5101387f, dramcont + UMC_INITCTLA); - writel(0x43030d3f, dramcont + UMC_INITCTLB); - writel(0x00ff00ff, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000298, dramcont + UMC_DRMMR2); - writel(0x00000000, dramcont + UMC_DRMMR3); - writel(0x003f0617, dramcont + UMC_SPCCTLA); - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); - writel(0x04060802, dramcont + UMC_WDATACTL_D0); - writel(0x04060802, dramcont + UMC_WDATACTL_D1); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x0000000f, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x00000000, dramcont + 0x0060); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00010000, dramcont + UMC_SPCSETD); - writel(0x80000020, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000103, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_1, freq, size_ch0); - - ddrphy_prepare_training(phy0_1, 1); - ddrphy_training(phy0_1); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 0); - ddrphy_training(phy1_0); - - writel(0x00000103, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_1, freq, size_ch1); - - ddrphy_prepare_training(phy1_1, 1); - ddrphy_training(phy1_1); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile deleted file mode 100644 index 48a3756c1d..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c deleted file mode 100644 index ccc6897d0a..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) - -void bcu_init(void) -{ - int shift; - - writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */ - writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */ - /* - * 0xe0000000-0xefffffff: Ex-bus - * 0xf0000000-0xfbffffff: ASM bus - * 0xfc000000-0xffffffff: OCM bus - */ - writel(0x24440000, BCSCR5); - - /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; - writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */ - - shift -= 32; - writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c deleted file mode 100644 index 40000afe74..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct boot_device_info boot_device_table[] = { - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "External Master"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_MMC1, "eMMC (3.3V, Boot Oparation)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_MMC1, "eMMC (1.8V, Boot Oparation)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_MMC1, "eMMC (3.3V, Normal)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_MMC1, "eMMC (1.8V, Normal)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } -}; - -int get_boot_mode_sel(void) -{ - return readl(SG_PINMON0) & 0x3f; -} - -u32 spl_boot_device(void) -{ - int boot_mode; - - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - - boot_mode = get_boot_mode_sel(); - - return boot_device_table[boot_mode].type; -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c deleted file mode 100644 index 3a3dab7a15..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c deleted file mode 100644 index f6ceef5f1c..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ - sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ - - sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ - sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ - - sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ - sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c deleted file mode 100644 index 553a9e3384..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/memconf.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static inline u32 sg_memconf_val_ch2(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH2_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH2_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH2_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH2_SZ_512M; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH2_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH2_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -u32 memconf_additional_val(void) -{ - return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c deleted file mode 100644 index dea938ed2f..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -void pin_init(void) -{ -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ - sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ - - sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ - sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ - - sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ - sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ - - sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ - sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/ph1-sld3/pll_init.c deleted file mode 100644 index ebd1c310b7..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -void pll_init(void) -{ - /* add pll init code here */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c deleted file mode 100644 index fcf2ad282a..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void enable_dpll_ssc(void) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c deleted file mode 100644 index 3e62121ba9..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. - * - * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank - * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x40000000-0x41ffffff: mask ROM - * 0x42000000-0x43efffff: memory bank (31MB) - * 0x43f00000-0x43ffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } - - sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c deleted file mode 100644 index ca3cb9c6b8..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -void sg_init(void) -{ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c deleted file mode 100644 index 91ee3de282..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -int umc_init(void) -{ - /* add UMC init code here */ - printf("Implement memory init code\n"); - - return 0; -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/Makefile b/arch/arm/mach-uniphier/ph1-sld8/Makefile deleted file mode 100644 index 8eb575e1d3..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/Makefile +++ /dev/null @@ -1 +0,0 @@ -include $(src)/../ph1-ld4/Makefile diff --git a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c deleted file mode 100644 index 69b172e4e7..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c deleted file mode 100644 index 8d3435d632..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c deleted file mode 100644 index 21efe62da6..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, &phy->mr3); -#else - writel(0x00000800, &phy->mr3); -#endif - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c deleted file mode 100644 index dd236b7e50..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c deleted file mode 100644 index 1b64414553..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c b/arch/arm/mach-uniphier/ph1-sld8/pll_init.c deleted file mode 100644 index 109cb5fee0..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void dpll_init(void) -{ - u32 tmp; - /* - * Set DPLL SSC parameters for DPLLCTRL3 - * [23] DIVN_TEST 0x1 - * [22:16] DIVN 0x50 - * [10] FREFSEL_TEST 0x1 - * [9:8] FREFSEL 0x2 - * [4] ICPD_TEST 0x1 - * [3:0] ICPD 0xb - */ - tmp = readl(SC_DPLLCTRL3); - tmp &= ~0x00ff0717; - tmp |= 0x00d0061b; - writel(tmp, SC_DPLLCTRL3); - - /* - * Set DPLL SSC parameters for DPLLCTRL - * <-1%> <-2%> - * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) - * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x3ff07fff; -#ifdef CONFIG_DPLL_SSC_RATE_1PER - tmp |= 0x084018bf; -#else - tmp |= 0x084031a6; -#endif - writel(tmp, SC_DPLLCTRL); - - /* - * Set DPLL SSC parameters for DPLLCTRL2 - * [31:29] SSC_STEP 0 - * [27] SSC_REG_REF 1 - * [26:20] SSC_M 79 (0x4f) - * [19:0] SSC_K 964689 (0xeb851) - */ - tmp = readl(SC_DPLLCTRL2); - tmp &= ~0xefffffff; - tmp |= 0x0cfeb851; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c deleted file mode 100644 index 9b8c4855e5..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c deleted file mode 100644 index 225c0d24de..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sbc_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c b/arch/arm/mach-uniphier/ph1-sld8/umc_init.c deleted file mode 100644 index 7baea7e852..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000000, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x000fffcf, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_FRCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ -#ifdef CONFIG_DDR_STANDARD - writel(0x55990b11, dramcont + UMC_CMDCTLA); - writel(0x16958944, dramcont + UMC_CMDCTLB); -#else - writel(0x45990b11, dramcont + UMC_CMDCTLA); - writel(0x16958924, dramcont + UMC_CMDCTLB); -#endif - - writel(0x5101046A, dramcont + UMC_INITCTLA); - - if (size == 1) - writel(0x27028B0A, dramcont + UMC_INITCTLB); - else if (size == 2) - writel(0x38028B0A, dramcont + UMC_INITCTLB); - - writel(0x00FF00FF, dramcont + UMC_INITCTLC); - writel(0x00000b51, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000290, dramcont + UMC_DRMMR2); - -#ifdef CONFIG_DDR_STANDARD - writel(0x00000000, dramcont + UMC_DRMMR3); -#else - writel(0x00000800, dramcont + UMC_DRMMR3); -#endif - - if (size == 1) - writel(0x00240512, dramcont + UMC_SPCCTLA); - else if (size == 2) - writel(0x00350512, dramcont + UMC_SPCCTLA); - - writel(0x00ff0006, dramcont + UMC_SPCCTLB); - writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); - writel(0x04060806, dramcont + UMC_WDATACTL_D0); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x00000003, dramcont + 0x7000); - writel(0x0000004f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000077, dramcont + 0x8008); - writel(0x0000003b, dramcont + UMC_DICGCTLA); - writel(0x020a0808, dramcont + UMC_DICGCTLB); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00000000, dramcont + UMC_SPCSETD); - writel(0x00000520, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 1); - ddrphy_training(phy1_0); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile new file mode 100644 index 0000000000..542c670f97 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c new file mode 100644 index 0000000000..160d3ef299 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_ld4_pin_init(void) +{ + u32 tmp; + + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ +#endif + + tmp = readl(SG_IECTRL); + tmp |= 0x41; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c new file mode 100644 index 0000000000..f50644c52b --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_pro4_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..f1b2bbbb4a --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +void ph1_sld3_pin_init(void) +{ +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ + sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ + + sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ + sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ + + sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ + sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ + + sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ + sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c new file mode 100644 index 0000000000..f936a53d1f --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_sld8_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile new file mode 100644 index 0000000000..d33f99e446 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \ + pll-spectrum-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \ + pll-spectrum-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c new file mode 100644 index 0000000000..a272a900e1 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +#undef DPLL_SSC_RATE_1PER + +static int dpll_init(unsigned int dram_freq) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT (DPLLCTRL.bit[29:20]) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x000f0000; + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } + +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~SC_DPLLCTRL_SSC_RATE; +#else + tmp |= SC_DPLLCTRL_SSC_RATE; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); + + return 0; +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_ld4_pll_init(const struct uniphier_board_data *bd) +{ + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c new file mode 100644 index 0000000000..906c22f6c5 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +#undef DPLL_SSC_RATE_1PER + +static int dpll_init(unsigned int dram_freq) +{ + u32 tmp; + + /* + * Set Frequency + * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) + * to FOUT ( DPLLCTRL.bit[29:20] ) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~(0x000f0000); + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } + + /* + * Set Moduration rate + * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) + */ +#if defined(DPLL_SSC_RATE_1PER) + tmp &= ~0x00008000; +#else + tmp |= 0x00008000; +#endif + writel(tmp, SC_DPLLCTRL); + + tmp = readl(SC_DPLLCTRL2); + tmp |= SC_DPLLCTRL2_NRSTDS; + writel(tmp, SC_DPLLCTRL2); + + return 0; +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + /* Set VPLL27A & VPLL27B */ + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) + return; + + /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Unset VPLA_K_LD and VPLB_K_LD bit */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set VPLA_M and VPLB_M to 0x20 */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { + /* Set VPLA_K and VPLB_K for AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066666; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* wait 1 usec */ + udelay(1); + + /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Unset VPLA_SNRST and VPLB_SNRST bit */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_pro4_pll_init(const struct uniphier_board_data *bd) +{ + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 1 usec in vpll_init() so 1 usec can be saved here. + */ + udelay(499); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c new file mode 100644 index 0000000000..6294a452c2 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd) +{ + /* add pll init code here */ + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c new file mode 100644 index 0000000000..f249abeeda --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c @@ -0,0 +1,204 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +static void dpll_init(void) +{ + u32 tmp; + /* + * Set DPLL SSC parameters for DPLLCTRL3 + * [23] DIVN_TEST 0x1 + * [22:16] DIVN 0x50 + * [10] FREFSEL_TEST 0x1 + * [9:8] FREFSEL 0x2 + * [4] ICPD_TEST 0x1 + * [3:0] ICPD 0xb + */ + tmp = readl(SC_DPLLCTRL3); + tmp &= ~0x00ff0717; + tmp |= 0x00d0061b; + writel(tmp, SC_DPLLCTRL3); + + /* + * Set DPLL SSC parameters for DPLLCTRL + * <-1%> <-2%> + * [29:20] SSC_UPCNT 132 (0x084) 132 (0x084) + * [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6) + */ + tmp = readl(SC_DPLLCTRL); + tmp &= ~0x3ff07fff; +#ifdef CONFIG_DPLL_SSC_RATE_1PER + tmp |= 0x084018bf; +#else + tmp |= 0x084031a6; +#endif + writel(tmp, SC_DPLLCTRL); + + /* + * Set DPLL SSC parameters for DPLLCTRL2 + * [31:29] SSC_STEP 0 + * [27] SSC_REG_REF 1 + * [26:20] SSC_M 79 (0x4f) + * [19:0] SSC_K 964689 (0xeb851) + */ + tmp = readl(SC_DPLLCTRL2); + tmp &= ~0xefffffff; + tmp |= 0x0cfeb851; + writel(tmp, SC_DPLLCTRL2); +} + +static void upll_init(void) +{ + u32 tmp, clk_mode_upll, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ + tmp = readl(SC_UPLLCTRL); + tmp &= ~0x18000000; + writel(tmp, SC_UPLLCTRL); + + if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x0228f5c0; + } else { + /* AXO: default 24.576MHz */ + tmp &= ~0x07ffffff; + tmp |= 0x02328000; + } + } + + writel(tmp, SC_UPLLCTRL); + + /* set 1 to K_LD(UPLLCTRL.bit[27]) */ + tmp |= 0x08000000; + writel(tmp, SC_UPLLCTRL); + + /* wait 10 usec */ + udelay(10); + + /* set 1 to SNRT(UPLLCTRL.bit[28]) */ + tmp |= 0x10000000; + writel(tmp, SC_UPLLCTRL); +} + +static void vpll_init(void) +{ + u32 tmp, clk_mode_axosel; + + tmp = readl(SG_PINMON0); + clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; + + /* set 1 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= 0x00000001; + writel(tmp, SC_VPLL27BCTRL); + + /* Set 0 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp &= ~0x0000007f; + tmp |= 0x00000020; + writel(tmp, SC_VPLL27BCTRL2); + + if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || + clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { + /* AXO: 25MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x00066664; + writel(tmp, SC_VPLL27BCTRL3); + } else { + /* AXO: default 24.576MHz */ + tmp = readl(SC_VPLL27ACTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp &= ~0x000fffff; + tmp |= 0x000f5800; + writel(tmp, SC_VPLL27BCTRL3); + } + + /* Set 1 to VPLA_K_LD and VPLB_K_LD */ + tmp = readl(SC_VPLL27ACTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL3); + tmp = readl(SC_VPLL27BCTRL3); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL3); + + /* wait 10 usec */ + udelay(10); + + /* Set 0 to VPLA_SNRST and VPLB_SNRST */ + tmp = readl(SC_VPLL27ACTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27ACTRL2); + tmp = readl(SC_VPLL27BCTRL2); + tmp |= 0x10000000; + writel(tmp, SC_VPLL27BCTRL2); + + /* set 0 to VPLA27WP and VPLA27WP */ + tmp = readl(SC_VPLL27ACTRL); + tmp &= ~0x00000001; + writel(tmp, SC_VPLL27ACTRL); + tmp = readl(SC_VPLL27BCTRL); + tmp |= ~0x00000001; + writel(tmp, SC_VPLL27BCTRL); +} + +int ph1_sld8_pll_init(const struct uniphier_board_data *bd) +{ + dpll_init(); + upll_init(); + vpll_init(); + + /* + * Wait 500 usec until dpll get stable + * We wait 10 usec in upll_init() and vpll_init() + * so 20 usec can be saved here. + */ + udelay(480); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c new file mode 100644 index 0000000000..cad0ed8cdd --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c new file mode 100644 index 0000000000..43dc973654 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd) +{ + u32 tmp; + + tmp = readl(SC_DPLLCTRL); + tmp |= SC_DPLLCTRL_SSC_EN; + writel(tmp, SC_DPLLCTRL); + + return 0; +} diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile new file mode 100644 index 0000000000..68ffd1c626 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c new file mode 100644 index 0000000000..929f50a883 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c new file mode 100644 index 0000000000..1032c54e64 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) +{ + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c new file mode 100644 index 0000000000..fb707be83a --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) +{ + /* only address/data multiplex mode is supported */ + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/soc_info.c b/arch/arm/mach-uniphier/soc_info.c new file mode 100644 index 0000000000..3e8e7f4ef3 --- /dev/null +++ b/arch/arm/mach-uniphier/soc_info.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void) +{ + u32 revision = readl(SG_REVISION); + enum uniphier_soc_id ret; + + switch ((revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT) { +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3 + case 0x25: + ret = SOC_UNIPHIER_PH1_SLD3; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD4 + case 0x26: + ret = SOC_UNIPHIER_PH1_LD4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO4 + case 0x28: + ret = SOC_UNIPHIER_PH1_PRO4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD8 + case 0x29: + ret = SOC_UNIPHIER_PH1_SLD8; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO5 + case 0x2A: + ret = SOC_UNIPHIER_PH1_PRO5; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PROXSTREAM2 + case 0x2E: + ret = SOC_UNIPHIER_PROXSTREAM2; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD6B + case 0x2F: + ret = SOC_UNIPHIER_PH1_LD6B; + break; +#endif + default: + ret = SOC_UNIPHIER_UNKNOWN; + break; + } + + return ret; +} +#endif diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c deleted file mode 100644 index 4c3cad3b88..0000000000 --- a/arch/arm/mach-uniphier/spl.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2013-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void __weak bcu_init(void) -{ -}; - -void __weak sbc_init(void) -{ -}; - -void __weak sg_init(void) -{ -}; - -void __weak early_pin_init(void) -{ -}; - -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void memconf_init(void); -void early_clkrst_init(void); -void early_pin_init(void); -int umc_init(void); -void enable_dpll_ssc(void); - -void spl_board_init(void) -{ - bcu_init(); - - sbc_init(); - - sg_init(); - - support_card_reset(); - - pll_init(); - - support_card_init(); - - led_puts("L0"); - - memconf_init(); - - led_puts("L1"); - - early_clkrst_init(); - - led_puts("L2"); - - early_pin_init(); - - led_puts("L3"); - -#ifdef CONFIG_SPL_SERIAL_SUPPORT - preloader_console_init(); -#endif - - led_puts("L4"); - - { - int res; - - res = umc_init(); - if (res < 0) { - while (1) - ; - } - } - - led_puts("L5"); - - enable_dpll_ssc(); - - led_puts("L6"); -} diff --git a/arch/arm/mach-uniphier/umc/Makefile b/arch/arm/mach-uniphier/umc/Makefile new file mode 100644 index 0000000000..dd35e77dab --- /dev/null +++ b/arch/arm/mach-uniphier/umc/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c new file mode 100644 index 0000000000..81246850b3 --- /dev/null +++ b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + if (freq == 1333) { + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x000FF0FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + } else if (freq == 1600) { + writel(0x36BB0F17, dramcont + UMC_CMDCTLA); + writel(0x18C6AA24, dramcont + UMC_CMDCTLB); + writel(0x5101387F, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x2F030D3F, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x43030D3F, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + } + + writel(0x00000006, dramcont + UMC_DRMMR1); + + if (freq == 1333) + writel(0x00000290, dramcont + UMC_DRMMR2); + else if (freq == 1600) + writel(0x00000298, dramcont + UMC_DRMMR2); + + writel(0x00000800, dramcont + UMC_DRMMR3); + + if (freq == 1333) { + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + } else if (freq == 1600) { + if (size == 1) + writel(0x002B0617, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x003F0617, dramcont + UMC_SPCCTLA); + + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + } + + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int ph1_ld4_umc_init(const struct uniphier_board_data *bd) +{ + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + (bd->dram_freq == 1333 || bd->dram_freq == 1600) && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } +} diff --git a/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c new file mode 100644 index 0000000000..8c9f0579fc --- /dev/null +++ b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000001, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x07ffffff, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + + writel(0x03010100, ssif_base + UMC_HDMCHSEL); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DVCCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_HDMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_HDDRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_GIORST); + writel(0x00000001, ssif_base + UMC_HD2RST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_DVCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_VPERST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ + writel(0x66bb0f17, dramcont + UMC_CMDCTLA); + writel(0x18c6aa44, dramcont + UMC_CMDCTLB); + writel(0x5101387f, dramcont + UMC_INITCTLA); + writel(0x43030d3f, dramcont + UMC_INITCTLB); + writel(0x00ff00ff, dramcont + UMC_INITCTLC); + writel(0x00000d71, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000298, dramcont + UMC_DRMMR2); + writel(0x00000000, dramcont + UMC_DRMMR3); + writel(0x003f0617, dramcont + UMC_SPCCTLA); + writel(0x00ff0008, dramcont + UMC_SPCCTLB); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); + writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); + writel(0x04060802, dramcont + UMC_WDATACTL_D0); + writel(0x04060802, dramcont + UMC_WDATACTL_D1); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x0000000f, dramcont + 0x7000); + writel(0x0000000f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000071, dramcont + 0x8008); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x00000000, dramcont + 0x0060); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00010000, dramcont + UMC_SPCSETD); + writel(0x80000020, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000103, dramcont0 + UMC_DIOCTLA); + + ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0); + + ddrphy_prepare_training(phy0_1, 1); + ddrphy_training(phy0_1); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 0); + ddrphy_training(phy1_0); + + writel(0x00000103, dramcont1 + UMC_DIOCTLA); + + ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1); + + ddrphy_prepare_training(phy1_1, 1); + ddrphy_training(phy1_1); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int ph1_pro4_umc_init(const struct uniphier_board_data *bd) +{ + if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) || + (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) && + ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) || + (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) && + bd->dram_freq == 1600) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } +} diff --git a/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c new file mode 100644 index 0000000000..bc60a3472e --- /dev/null +++ b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c @@ -0,0 +1,155 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static void umc_start_ssif(void __iomem *ssif_base) +{ + writel(0x00000000, ssif_base + 0x0000b004); + writel(0xffffffff, ssif_base + 0x0000c004); + writel(0x000fffcf, ssif_base + 0x0000c008); + writel(0x00000001, ssif_base + 0x0000b000); + writel(0x00000001, ssif_base + 0x0000c000); + writel(0x03010101, ssif_base + UMC_MDMCHSEL); + writel(0x03010100, ssif_base + UMC_DMDCHSEL); + + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); + writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); + + writel(0x00000001, ssif_base + UMC_CPURST); + writel(0x00000001, ssif_base + UMC_IDSRST); + writel(0x00000001, ssif_base + UMC_IXMRST); + writel(0x00000001, ssif_base + UMC_MDMRST); + writel(0x00000001, ssif_base + UMC_MDDRST); + writel(0x00000001, ssif_base + UMC_SIORST); + writel(0x00000001, ssif_base + UMC_VIORST); + writel(0x00000001, ssif_base + UMC_FRCRST); + writel(0x00000001, ssif_base + UMC_RGLRST); + writel(0x00000001, ssif_base + UMC_AIORST); + writel(0x00000001, ssif_base + UMC_DMDRST); +} + +static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, + int size, int freq) +{ +#ifdef CONFIG_DDR_STANDARD + writel(0x55990b11, dramcont + UMC_CMDCTLA); + writel(0x16958944, dramcont + UMC_CMDCTLB); +#else + writel(0x45990b11, dramcont + UMC_CMDCTLA); + writel(0x16958924, dramcont + UMC_CMDCTLB); +#endif + + writel(0x5101046A, dramcont + UMC_INITCTLA); + + if (size == 1) + writel(0x27028B0A, dramcont + UMC_INITCTLB); + else if (size == 2) + writel(0x38028B0A, dramcont + UMC_INITCTLB); + + writel(0x00FF00FF, dramcont + UMC_INITCTLC); + writel(0x00000b51, dramcont + UMC_DRMMR0); + writel(0x00000006, dramcont + UMC_DRMMR1); + writel(0x00000290, dramcont + UMC_DRMMR2); + +#ifdef CONFIG_DDR_STANDARD + writel(0x00000000, dramcont + UMC_DRMMR3); +#else + writel(0x00000800, dramcont + UMC_DRMMR3); +#endif + + if (size == 1) + writel(0x00240512, dramcont + UMC_SPCCTLA); + else if (size == 2) + writel(0x00350512, dramcont + UMC_SPCCTLA); + + writel(0x00ff0006, dramcont + UMC_SPCCTLB); + writel(0x000a00ac, dramcont + UMC_RDATACTL_D0); + writel(0x04060806, dramcont + UMC_WDATACTL_D0); + writel(0x04a02000, dramcont + UMC_DATASET); + writel(0x00000000, ca_base + 0x2300); + writel(0x00400020, dramcont + UMC_DCCGCTL); + writel(0x00000003, dramcont + 0x7000); + writel(0x0000004f, dramcont + 0x8000); + writel(0x000000c3, dramcont + 0x8004); + writel(0x00000077, dramcont + 0x8008); + writel(0x0000003b, dramcont + UMC_DICGCTLA); + writel(0x020a0808, dramcont + UMC_DICGCTLB); + writel(0x00000004, dramcont + UMC_FLOWCTLG); + writel(0x80000201, ca_base + 0xc20); + writel(0x0801e01e, dramcont + UMC_FLOWCTLA); + writel(0x00200000, dramcont + UMC_FLOWCTLB); + writel(0x00004444, dramcont + UMC_FLOWCTLC); + writel(0x200a0a00, dramcont + UMC_SPCSETB); + writel(0x00000000, dramcont + UMC_SPCSETD); + writel(0x00000520, dramcont + UMC_DFICUPDCTLA); +} + +static int umc_init_sub(int freq, int size_ch0, int size_ch1) +{ + void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; + void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); + void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); + void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); + void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); + void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); + void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); + + umc_dram_init_start(dramcont0); + umc_dram_init_start(dramcont1); + umc_dram_init_poll(dramcont0); + umc_dram_init_poll(dramcont1); + + writel(0x00000101, dramcont0 + UMC_DIOCTLA); + + ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0); + + ddrphy_prepare_training(phy0_0, 0); + ddrphy_training(phy0_0); + + writel(0x00000101, dramcont1 + UMC_DIOCTLA); + + ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1); + + ddrphy_prepare_training(phy1_0, 1); + ddrphy_training(phy1_0); + + umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); + umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); + + umc_start_ssif(ssif_base); + + return 0; +} + +int ph1_sld8_umc_init(const struct uniphier_board_data *bd) +{ + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + bd->dram_freq == 1333 && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } +} -- cgit From 28f40d4a4db2b6c701d349fd4fac286d21369de2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:40 +0900 Subject: ARM: uniphier: add PH1-Pro5 support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Kconfig | 9 +++ arch/arm/mach-uniphier/board_early_init_f.c | 7 ++ arch/arm/mach-uniphier/boards.c | 15 +++++ arch/arm/mach-uniphier/boot-mode/Makefile | 1 + .../mach-uniphier/boot-mode/boot-mode-ph1-pro5.c | 75 ++++++++++++++++++++++ arch/arm/mach-uniphier/boot-mode/boot-mode.c | 4 ++ arch/arm/mach-uniphier/clk/Makefile | 1 + arch/arm/mach-uniphier/clk/clk-ph1-pro5.c | 44 +++++++++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 5 ++ arch/arm/mach-uniphier/debug_ll.S | 24 +++++++ arch/arm/mach-uniphier/early-clk/Makefile | 1 + .../mach-uniphier/early-clk/early-clk-ph1-pro5.c | 39 +++++++++++ arch/arm/mach-uniphier/include/mach/boot-device.h | 2 + arch/arm/mach-uniphier/include/mach/init.h | 4 ++ arch/arm/mach-uniphier/include/mach/sc-regs.h | 21 ++++++ arch/arm/mach-uniphier/include/mach/sg-regs.h | 2 +- arch/arm/mach-uniphier/init/Makefile | 1 + arch/arm/mach-uniphier/init/init-ph1-pro5.c | 42 ++++++++++++ arch/arm/mach-uniphier/init/init.c | 5 ++ arch/arm/mach-uniphier/pinctrl/Makefile | 1 + arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c | 43 +++++++++++++ arch/arm/mach-uniphier/sbc/Makefile | 1 + 22 files changed, 346 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/clk/clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/init/init-ph1-pro5.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 2cc5dac070..7a62957de3 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -33,6 +33,15 @@ config ARCH_UNIPHIER_PH1_SLD8 help This enables support for UniPhier PH1-sLD8 SoC. +config ARCH_UNIPHIER_PH1_PRO5 + bool "UniPhier PH1-Pro5 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro5 SoC. + config MICRO_SUPPORT_CARD bool "Use Micro Support Card" help diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index cd516c3121..fb4927222c 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -40,6 +40,13 @@ int board_early_init_f(void) led_puts("U1"); ph1_ld4_clk_init(); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_pin_init(); + led_puts("U1"); + ph1_pro5_clk_init(); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c index 6a5ea2e585..fba8859712 100644 --- a/arch/arm/mach-uniphier/boards.c +++ b/arch/arm/mach-uniphier/boards.c @@ -59,6 +59,18 @@ static const struct uniphier_board_data ph1_sld8_data = { }; #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +static const struct uniphier_board_data ph1_pro5_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1866, +}; +#endif + struct uniphier_board_id { const char *compatible; const struct uniphier_board_data *param; @@ -77,6 +89,9 @@ static const struct uniphier_board_id uniphier_boards[] = { #if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) { "socionext,ph1-sld8", &ph1_sld8_data, }, #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + { "socionext,ph1-pro5", &ph1_pro5_data, }, +#endif }; const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile index bd6d0a3d7c..1d2f8b3946 100644 --- a/arch/arm/mach-uniphier/boot-mode/Makefile +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c new file mode 100644 index 0000000000..c68cb59fc0 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + { /* sentinel */ } +}; + +static int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 ph1_pro5_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_pro5_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c index 71abdef1f4..60329eb10a 100644 --- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -28,6 +28,10 @@ u32 spl_boot_device(void) case SOC_UNIPHIER_PH1_PRO4: case SOC_UNIPHIER_PH1_SLD8: return ph1_ld4_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + return ph1_pro5_boot_device(); #endif default: return BOOT_DEVICE_NONE; diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index e6931d6461..873c4f7207 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c new file mode 100644 index 0000000000..f78edbbe3f --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_pro5_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index a61d40e6c5..58c53bf193 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -27,6 +27,11 @@ static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) case SOC_UNIPHIER_PH1_SLD8: ph1_ld4_boot_mode_show(); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_boot_mode_show(); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S index d5ccad3244..056f77ed55 100644 --- a/arch/arm/mach-uniphier/debug_ll.S +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -101,6 +101,30 @@ ph1_pro4_end: b init_uart ph1_sld8_end: #endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +#define PH1_PRO5_UART_CLK 73728000 + cmp r1, #0x2A + bne ph1_pro5_end + + sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro5_end: +#endif init_uart: addruart r0, r1, r2 diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile index 58af1add58..939795c26d 100644 --- a/arch/arm/mach-uniphier/early-clk/Makefile +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c new file mode 100644 index 0000000000..007d3b8570 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* + * deassert reset + * UMCA2: Ch1 (DDR3) + * UMCA1, UMC31: Ch0 (WIO1) + * UMCA0, UMC30: Ch0 (WIO0) + */ + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 | + SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index eddb25ffa4..3cbe7737a2 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -14,8 +14,10 @@ struct boot_device_info { u32 ph1_sld3_boot_device(void); u32 ph1_ld4_boot_device(void); +u32 ph1_pro5_boot_device(void); void ph1_sld3_boot_mode_show(void); void ph1_ld4_boot_mode_show(void); +void ph1_pro5_boot_mode_show(void); #endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h index 228cbb1a19..914182d1e8 100644 --- a/arch/arm/mach-uniphier/include/mach/init.h +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -26,6 +26,7 @@ int ph1_sld3_init(const struct uniphier_board_data *bd); int ph1_ld4_init(const struct uniphier_board_data *bd); int ph1_pro4_init(const struct uniphier_board_data *bd); int ph1_sld8_init(const struct uniphier_board_data *bd); +int ph1_pro5_init(const struct uniphier_board_data *bd); #if defined(CONFIG_MICRO_SUPPORT_CARD) int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); @@ -63,6 +64,7 @@ int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd); int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); @@ -74,9 +76,11 @@ void ph1_sld3_pin_init(void); void ph1_ld4_pin_init(void); void ph1_pro4_pin_init(void); void ph1_sld8_pin_init(void); +void ph1_pro5_pin_init(void); void ph1_ld4_clk_init(void); void ph1_pro4_clk_init(void); +void ph1_pro5_clk_init(void); #define pr_err(fmt, args...) printf(fmt, ##args) diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index 9d697b16ee..903e405091 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -15,6 +15,10 @@ #define SC_BASE_ADDR 0x61840000 #endif +#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110) +#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1) +#define SC_DPLLOSCCTRL_DPLLEN (0x1 << 0) + #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) #define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) @@ -43,6 +47,7 @@ #define SC_RSTCTRL_NRST_ETHER (0x1 << 12) #define SC_RSTCTRL_NRST_STDMAC (0x1 << 10) #define SC_RSTCTRL_NRST_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) #define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) #define SC_RSTCTRL_NRST_NAND (0x1 << 2) @@ -53,6 +58,15 @@ #define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) +/* Pro5 or newer */ +#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) +#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ +#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ +#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */ +#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ +#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */ + #define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) #define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */ #define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */ @@ -60,11 +74,18 @@ #define SC_CLKCTRL_CEN_MIO (0x1 << 11) #define SC_CLKCTRL_CEN_STDMAC (0x1 << 10) #define SC_CLKCTRL_CEN_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_CLKCTRL_CEN_UMC (0x1 << 4) #define SC_CLKCTRL_CEN_NAND (0x1 << 2) #define SC_CLKCTRL_CEN_SBC (0x1 << 1) #define SC_CLKCTRL_CEN_PERI (0x1 << 0) +/* Pro5 or newer */ +#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) +#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ +#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */ + /* System reset control register */ #define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) #define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index d8239f28bc..168b35e723 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -59,7 +59,7 @@ /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) -/* Only for PH1-Pro4 */ +/* PH1-Pro4, PH1-Pro5 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) /* Input Enable */ diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile index dd9804d33b..1524a8d053 100644 --- a/arch/arm/mach-uniphier/init/Makefile +++ b/arch/arm/mach-uniphier/init/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro5.c b/arch/arm/mach-uniphier/init/init-ph1-pro5.c new file mode 100644 index 0000000000..92b3f21d93 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro5.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int ph1_pro5_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_pro5_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c index 316be029ae..2649e6c417 100644 --- a/arch/arm/mach-uniphier/init/init.c +++ b/arch/arm/mach-uniphier/init/init.c @@ -39,6 +39,11 @@ void spl_board_init(void) case SOC_UNIPHIER_PH1_SLD8: ph1_sld8_init(param); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_init(param); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile index 542c670f97..a7852457f1 100644 --- a/arch/arm/mach-uniphier/pinctrl/Makefile +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c new file mode 100644 index 0000000000..a6cc0824e2 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_pro5_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(19, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(20, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(21, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(22, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(23, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(24, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(25, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(26, 0, 4, 8); /* XNFCE1 -> XNFCE1 */ + sg_set_pinsel(27, 0, 4, 8); /* NRYBY1 -> NRYBY1 */ + sg_set_pinsel(28, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(29, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(30, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(31, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(32, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(33, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(34, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(35, 0, 4, 8); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(124, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(125, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(126, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(127, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile index 68ffd1c626..2c5fd1a1fc 100644 --- a/arch/arm/mach-uniphier/sbc/Makefile +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o -- cgit From 019df879a93e266ac19f5eb00e4ee605db279b14 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:41 +0900 Subject: ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/Kconfig | 18 ++++++ arch/arm/mach-uniphier/board_early_init_f.c | 14 ++++ arch/arm/mach-uniphier/boards.c | 22 +++++++ arch/arm/mach-uniphier/boot-mode/Makefile | 2 + .../boot-mode/boot-mode-proxstream2.c | 75 ++++++++++++++++++++++ arch/arm/mach-uniphier/boot-mode/boot-mode.c | 6 ++ arch/arm/mach-uniphier/clk/Makefile | 2 + arch/arm/mach-uniphier/clk/clk-proxstream2.c | 50 +++++++++++++++ arch/arm/mach-uniphier/cmd_pinmon.c | 7 ++ arch/arm/mach-uniphier/debug_ll.S | 49 ++++++++++++++ arch/arm/mach-uniphier/early-clk/Makefile | 2 + .../early-clk/early-clk-proxstream2.c | 44 +++++++++++++ arch/arm/mach-uniphier/include/mach/boot-device.h | 2 + arch/arm/mach-uniphier/include/mach/init.h | 12 ++++ arch/arm/mach-uniphier/include/mach/sc-regs.h | 2 + arch/arm/mach-uniphier/include/mach/sg-regs.h | 2 + arch/arm/mach-uniphier/init/Makefile | 2 + arch/arm/mach-uniphier/init/init-proxstream2.c | 41 ++++++++++++ arch/arm/mach-uniphier/init/init.c | 7 ++ arch/arm/mach-uniphier/memconf/Makefile | 2 + .../mach-uniphier/memconf/memconf-proxstream2.c | 64 ++++++++++++++++++ arch/arm/mach-uniphier/pinctrl/Makefile | 2 + arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c | 45 +++++++++++++ .../mach-uniphier/pinctrl/pinctrl-proxstream2.c | 45 +++++++++++++ arch/arm/mach-uniphier/sbc/Makefile | 2 + arch/arm/mach-uniphier/sbc/sbc-proxstream2.c | 48 ++++++++++++++ 26 files changed, 567 insertions(+) create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c create mode 100644 arch/arm/mach-uniphier/clk/clk-proxstream2.c create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c create mode 100644 arch/arm/mach-uniphier/init/init-proxstream2.c create mode 100644 arch/arm/mach-uniphier/memconf/memconf-proxstream2.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c create mode 100644 arch/arm/mach-uniphier/sbc/sbc-proxstream2.c (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7a62957de3..22ab798b96 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -42,6 +42,24 @@ config ARCH_UNIPHIER_PH1_PRO5 help This enables support for UniPhier PH1-Pro5 SoC. +config ARCH_UNIPHIER_PROXSTREAM2 + bool "UniPhier ProXstream2 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier ProXstream2 SoC. + +config ARCH_UNIPHIER_PH1_LD6B + bool "UniPhier PH1-LD6b SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-LD6b SoC. + config MICRO_SUPPORT_CARD bool "Use Micro Support Card" help diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index fb4927222c..5e0d246ce4 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -47,6 +47,20 @@ int board_early_init_f(void) led_puts("U1"); ph1_pro5_clk_init(); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + case SOC_UNIPHIER_PROXSTREAM2: + proxstream2_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PH1_LD6B: + ph1_ld6b_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c index fba8859712..812c58ff96 100644 --- a/arch/arm/mach-uniphier/boards.c +++ b/arch/arm/mach-uniphier/boards.c @@ -71,6 +71,22 @@ static const struct uniphier_board_data ph1_pro5_data = { }; #endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +static const struct uniphier_board_data proxstream2_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x40000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_ch2_base = 0xe0000000, + .dram_ch2_size = 0x20000000, + .dram_ch2_width = 16, + .dram_freq = 1866, +}; +#endif + struct uniphier_board_id { const char *compatible; const struct uniphier_board_data *param; @@ -92,6 +108,12 @@ static const struct uniphier_board_id uniphier_boards[] = { #if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) { "socionext,ph1-pro5", &ph1_pro5_data, }, #endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + { "socionext,proxstream2", &proxstream2_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + { "socionext,ph1-ld6b", &proxstream2_data, }, +#endif }; const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile index 1d2f8b3946..30c8874905 100644 --- a/arch/arm/mach-uniphier/boot-mode/Makefile +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -5,3 +5,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += boot-mode-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += boot-mode-proxstream2.o diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c new file mode 100644 index 0000000000..10a47c6fcc --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_NONE, "Reserved"}, +}; + +int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 proxstream2_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void proxstream2_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c index 60329eb10a..c6cafa7919 100644 --- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -32,6 +32,12 @@ u32 spl_boot_device(void) #if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) case SOC_UNIPHIER_PH1_PRO5: return ph1_pro5_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + return proxstream2_boot_device(); #endif default: return BOOT_DEVICE_NONE; diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index 873c4f7207..4f397b986b 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/clk/clk-proxstream2.c b/arch/arm/mach-uniphier/clk/clk-proxstream2.c new file mode 100644 index 0000000000..b494021ecf --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-proxstream2.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void proxstream2_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index 58c53bf193..b15ee9dd60 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -32,6 +32,13 @@ static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) case SOC_UNIPHIER_PH1_PRO5: ph1_pro5_boot_mode_show(); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_boot_mode_show(); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S index 056f77ed55..d8c9fe43e3 100644 --- a/arch/arm/mach-uniphier/debug_ll.S +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -125,6 +125,55 @@ ph1_sld8_end: b init_uart ph1_pro5_end: #endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) +#define PROXSTREAM2_UART_CLK 88900000 + cmp r1, #0x2E + bne proxstream2_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE) + + b init_uart +proxstream2_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +#define PH1_LD6B_UART_CLK 88900000 + cmp r1, #0x2F + bne ph1_ld6b_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0 + sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld6b_end: +#endif init_uart: addruart r0, r1, r2 diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile index 939795c26d..393ea96f90 100644 --- a/arch/arm/mach-uniphier/early-clk/Makefile +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += early-clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += early-clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c new file mode 100644 index 0000000000..c303f16a57 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int proxstream2_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* deassert reset */ + if (spl_boot_device() != BOOT_DEVICE_NAND) { + tmp = readl(SC_RSTCTRL); + tmp &= ~SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + }; + + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 | + SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL4); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 | + SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index 3cbe7737a2..2ab5a535fa 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -15,9 +15,11 @@ struct boot_device_info { u32 ph1_sld3_boot_device(void); u32 ph1_ld4_boot_device(void); u32 ph1_pro5_boot_device(void); +u32 proxstream2_boot_device(void); void ph1_sld3_boot_mode_show(void); void ph1_ld4_boot_mode_show(void); void ph1_pro5_boot_mode_show(void); +void proxstream2_boot_mode_show(void); #endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h index 914182d1e8..5108eddfc4 100644 --- a/arch/arm/mach-uniphier/include/mach/init.h +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -27,11 +27,13 @@ int ph1_ld4_init(const struct uniphier_board_data *bd); int ph1_pro4_init(const struct uniphier_board_data *bd); int ph1_sld8_init(const struct uniphier_board_data *bd); int ph1_pro5_init(const struct uniphier_board_data *bd); +int proxstream2_init(const struct uniphier_board_data *bd); #if defined(CONFIG_MICRO_SUPPORT_CARD) int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); int ph1_ld4_sbc_init(const struct uniphier_board_data *bd); int ph1_pro4_sbc_init(const struct uniphier_board_data *bd); +int proxstream2_sbc_init(const struct uniphier_board_data *bd); #else static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) { @@ -47,6 +49,11 @@ static inline int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) { return 0; } + +static inline int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} #endif int ph1_sld3_bcu_init(const struct uniphier_board_data *bd); @@ -54,6 +61,7 @@ int ph1_ld4_bcu_init(const struct uniphier_board_data *bd); int memconf_init(const struct uniphier_board_data *bd); int ph1_sld3_memconf_init(const struct uniphier_board_data *bd); +int proxstream2_memconf_init(const struct uniphier_board_data *bd); int ph1_sld3_pll_init(const struct uniphier_board_data *bd); int ph1_ld4_pll_init(const struct uniphier_board_data *bd); @@ -65,6 +73,7 @@ int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd); +int proxstream2_early_clk_init(const struct uniphier_board_data *bd); int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); @@ -77,10 +86,13 @@ void ph1_ld4_pin_init(void); void ph1_pro4_pin_init(void); void ph1_sld8_pin_init(void); void ph1_pro5_pin_init(void); +void proxstream2_pin_init(void); +void ph1_ld6b_pin_init(void); void ph1_ld4_clk_init(void); void ph1_pro4_clk_init(void); void ph1_pro5_clk_init(void); +void proxstream2_clk_init(void); #define pr_err(fmt, args...) printf(fmt, ##args) diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index 903e405091..474b82d243 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -64,6 +64,7 @@ #define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ #define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ #define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */ +#define SC_RSTCTRL4_NRST_UMC32 (0x1 << 6) /* UMC ch2 */ #define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ #define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */ @@ -83,6 +84,7 @@ /* Pro5 or newer */ #define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) #define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */ #define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ #define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */ diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index 168b35e723..678d437fc9 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -53,6 +53,8 @@ #define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) +/* PH1-LD6b, ProXstream2 only */ +#define SG_MEMCONF_CH2_DISABLE (0x1 << 21) #define SG_MEMCONF_SPARSEMEM (0x1 << 4) diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile index 1524a8d053..98833b55de 100644 --- a/arch/arm/mach-uniphier/init/Makefile +++ b/arch/arm/mach-uniphier/init/Makefile @@ -5,3 +5,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += init-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += init-proxstream2.o diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c new file mode 100644 index 0000000000..8d03b8f86a --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-proxstream2.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +int proxstream2_init(const struct uniphier_board_data *bd) +{ + proxstream2_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + proxstream2_memconf_init(bd); + + led_puts("L1"); + + proxstream2_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c index 2649e6c417..bbfc8e5e08 100644 --- a/arch/arm/mach-uniphier/init/init.c +++ b/arch/arm/mach-uniphier/init/init.c @@ -44,6 +44,13 @@ void spl_board_init(void) case SOC_UNIPHIER_PH1_PRO5: ph1_pro5_init(param); break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_init(param); + break; #endif default: break; diff --git a/arch/arm/mach-uniphier/memconf/Makefile b/arch/arm/mach-uniphier/memconf/Makefile index 1a718f31fa..42057a2077 100644 --- a/arch/arm/mach-uniphier/memconf/Makefile +++ b/arch/arm/mach-uniphier/memconf/Makefile @@ -1,2 +1,4 @@ obj-y += memconf.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += memconf-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += memconf-proxstream2.o diff --git a/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c new file mode 100644 index 0000000000..d7bf0d4e5f --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +int proxstream2_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + if (size_per_word) + tmp &= ~SG_MEMCONF_CH2_DISABLE; + else + tmp |= SG_MEMCONF_CH2_DISABLE; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile index a7852457f1..85175955d3 100644 --- a/arch/arm/mach-uniphier/pinctrl/Makefile +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c new file mode 100644 index 0000000000..4f950d3fc6 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void ph1_ld6b_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c new file mode 100644 index 0000000000..96abd0235c --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void proxstream2_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 8, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 8, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 8, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 8, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 8, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 8, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 8, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 8, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 8, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 8, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 8, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 8, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 8, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 8, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 8, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 8, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 8, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 8, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 8, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 8, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 8, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 8, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 8, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 8, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 8, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile index 2c5fd1a1fc..db622d2034 100644 --- a/arch/arm/mach-uniphier/sbc/Makefile +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += sbc-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += sbc-proxstream2.o diff --git a/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c new file mode 100644 index 0000000000..9c3aeb7cd0 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + /* necessary for ROM boot ?? */ + /* system bus output enable */ + writel(0x17, PC0CTRL); + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} -- cgit From d47fe9bb833bc8dae322c8a6fb0d28d4fec88167 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 22 Sep 2015 00:27:42 +0900 Subject: ARM: uniphier: fix init page table for ProXstream2/PH1-LD6b USB boot Currently, the USB boot mode is supported by an external loader and U-boot proper image is put on the section 0. This commit allows access there. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/init_page_table.S | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S index ac2959a17d..2d3ad15c6e 100644 --- a/arch/arm/mach-uniphier/init_page_table.S +++ b/arch/arm/mach-uniphier/init_page_table.S @@ -1,7 +1,5 @@ /* - * Copyright (C) 2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -23,7 +21,7 @@ ENTRY(init_page_table) section = 0 .rept NR_SECTIONS - .if section == TEXT_SECTION || section == STACK_SECTION + .if section == 0 || section == 1 || section == STACK_SECTION attr = NORMAL .else attr = DEVICE -- cgit