From ca1a4c863232ddc6bc2463569dedfefe992ff418 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 18 Jun 2018 21:56:25 +0300 Subject: mvebu: select boot device at SoC level Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach Signed-off-by: Stefan Roese --- arch/arm/mach-mvebu/.gitignore | 1 + arch/arm/mach-mvebu/Makefile | 30 ++++++++++++++++++++++++++++++ arch/arm/mach-mvebu/include/mach/config.h | 4 ++-- arch/arm/mach-mvebu/kwbimage.cfg.in | 12 ++++++++++++ 4 files changed, 45 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mvebu/.gitignore create mode 100644 arch/arm/mach-mvebu/kwbimage.cfg.in (limited to 'arch/arm') diff --git a/arch/arm/mach-mvebu/.gitignore b/arch/arm/mach-mvebu/.gitignore new file mode 100644 index 0000000000..775b9346b8 --- /dev/null +++ b/arch/arm/mach-mvebu/.gitignore @@ -0,0 +1 @@ +kwbimage.cfg diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ade7b87064..d907fac375 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -25,6 +25,36 @@ obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_MVEBU_EFUSE) += efuse.o + +extra-y += kwbimage.cfg + +KWB_REPLACE += BOOT_FROM +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) + KWB_CFG_BOOT_FROM=spi +endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) + KWB_CFG_BOOT_FROM=sdio +endif + +ifneq ($(CONFIG_SECURED_MODE_IMAGE),) +KWB_REPLACE += CSK_INDEX +KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) + +KWB_REPLACE += SEC_BOOT_DEV +KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ + $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ + $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ + ) + +KWB_REPLACE += SEC_FUSE_DUMP +KWB_CFG_SEC_FUSE_DUMP = a38x +endif + +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ + include/config/auto.conf + $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ + <$< >$(dir $<)$(@F) + endif # CONFIG_SPL_BUILD obj-y += gpio.o obj-y += mbus.o diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 2acfd3314a..9f51411e43 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -32,12 +32,12 @@ #endif /* - * By default kwbimage.cfg from board specific folder is used + * By default the generated mvebu kwbimage.cfg is used * If for some board, different configuration file need to be used, * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file */ #ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg #endif /* CONFIG_SYS_KWD_CONFIG */ /* Add target to build it automatically upon "make" */ diff --git a/arch/arm/mach-mvebu/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in new file mode 100644 index 0000000000..72e67d75c3 --- /dev/null +++ b/arch/arm/mach-mvebu/kwbimage.cfg.in @@ -0,0 +1,12 @@ +# +# Copyright (C) 2014 Stefan Roese +# + +# Armada 38x uses version 1 image format +VERSION 1 + +# Boot Media configurations +#@BOOT_FROM + +# Binary Header (bin_hdr) with DDR3 training code +BINARY spl/u-boot-spl.bin 0000005b 00000068 -- cgit