From d9be183b4c1a90649bb065f55754515abc96d51c Mon Sep 17 00:00:00 2001 From: "Derald D. Woods" Date: Sat, 16 Dec 2017 14:14:48 -0600 Subject: ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730} This commit adds OMAP3 EVM devicetree files from Linux v4.15-rc3. Note that this is the first addition of OMAP34XX devicetree files. Signed-off-by: Derald D. Woods --- arch/arm/dts/Makefile | 4 + arch/arm/dts/omap-gpmc-smsc911x.dtsi | 55 ++++++ arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 29 ++++ arch/arm/dts/omap3-evm-37xx.dts | 110 ++++++++++++ arch/arm/dts/omap3-evm-common.dtsi | 195 +++++++++++++++++++++ arch/arm/dts/omap3-evm-processor-common.dtsi | 216 ++++++++++++++++++++++++ arch/arm/dts/omap3-evm-u-boot.dtsi | 29 ++++ arch/arm/dts/omap3-evm.dts | 89 ++++++++++ arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi | 73 ++++++++ arch/arm/dts/omap34xx.dtsi | 84 +++++++++ 10 files changed, 884 insertions(+) create mode 100644 arch/arm/dts/omap-gpmc-smsc911x.dtsi create mode 100644 arch/arm/dts/omap3-evm-37xx-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-evm-37xx.dts create mode 100644 arch/arm/dts/omap3-evm-common.dtsi create mode 100644 arch/arm/dts/omap3-evm-processor-common.dtsi create mode 100644 arch/arm/dts/omap3-evm-u-boot.dtsi create mode 100644 arch/arm/dts/omap3-evm.dts create mode 100644 arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi create mode 100644 arch/arm/dts/omap34xx.dtsi (limited to 'arch/arm') diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7b798ae738..a895c70284 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -434,6 +434,10 @@ dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \ logicpd-torpedo-37xx-devkit.dtb \ logicpd-som-lv-37xx-devkit.dtb +dtb-$(CONFIG_TARGET_OMAP3_EVM) += \ + omap3-evm-37xx.dtb \ + omap3-evm.dtb + dtb-$(CONFIG_TARGET_SAMA5D2_PTC_EK) += \ at91-sama5d2_ptc_ek.dtb diff --git a/arch/arm/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/dts/omap-gpmc-smsc911x.dtsi new file mode 100644 index 0000000000..ded7e8fec9 --- /dev/null +++ b/arch/arm/dts/omap-gpmc-smsc911x.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common file for GPMC connected smsc911x on omaps + * + * Note that the board specifc DTS file needs to specify + * ranges, pinctrl, reg, interrupt parent and interrupts. + */ + +/ { + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; +}; + +&gpmc { + ethernet@gpmc { + compatible = "smsc,lan9221", "smsc,lan9115"; + bank-width = <2>; + gpmc,device-width = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <150>; + gpmc,cs-wr-off-ns = <150>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <140>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <140>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <120>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <75>; + gpmc,cycle2cycle-delay-ns = <75>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; + }; +}; diff --git a/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi new file mode 100644 index 0000000000..53a489988e --- /dev/null +++ b/arch/arm/dts/omap3-evm-37xx-u-boot.dtsi @@ -0,0 +1,29 @@ +/* + * U-Boot additions + * + * (C) Copyright 2017 Derald D. Woods + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + chosen { + stdout-path = &uart1; + }; +}; + +&mmc1 { + cd-inverted; +}; + +&uart1 { + reg-shift = <2>; +}; + +&uart2 { + reg-shift = <2>; +}; + +&uart3 { + reg-shift = <2>; +}; diff --git a/arch/arm/dts/omap3-evm-37xx.dts b/arch/arm/dts/omap3-evm-37xx.dts new file mode 100644 index 0000000000..5a4ba0aea4 --- /dev/null +++ b/arch/arm/dts/omap3-evm-37xx.dts @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-evm-common.dtsi" +#include "omap3-evm-processor-common.dtsi" + +/ { + model = "TI OMAP37XX EVM (TMDSEVM3730)"; + compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&gpmc { + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "hynix,h8kds0un0mer-4em"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0x1f880000>; + }; + }; +}; diff --git a/arch/arm/dts/omap3-evm-common.dtsi b/arch/arm/dts/omap3-evm-common.dtsi new file mode 100644 index 0000000000..ee64191e41 --- /dev/null +++ b/arch/arm/dts/omap3-evm-common.dtsi @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common support for omap3 EVM boards + */ + +#include +#include "omap-gpmc-smsc911x.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; +}; + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&lcd_3v3 { + gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ +}; + +&lcd0 { + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio6>; + interrupts = <15 0>; /* gpio175 */ + pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + vmmc-supply = <&vmmc1>; + vqmmc-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + ref-clock-frequency = <38400000>; + }; +}; + +&twl_gpio { + ti,use-leds; +}; + +&twl_keypad { + linux,keymap = < + MATRIX_KEY(2, 2, KEY_1) + MATRIX_KEY(1, 1, KEY_2) + MATRIX_KEY(0, 0, KEY_3) + MATRIX_KEY(3, 2, KEY_4) + MATRIX_KEY(2, 1, KEY_5) + MATRIX_KEY(1, 0, KEY_6) + MATRIX_KEY(1, 3, KEY_7) + MATRIX_KEY(3, 1, KEY_8) + MATRIX_KEY(2, 0, KEY_9) + MATRIX_KEY(2, 3, KEY_KPASTERISK) + MATRIX_KEY(0, 2, KEY_0) + MATRIX_KEY(3, 0, KEY_KPDOT) + /* s4 not wired */ + MATRIX_KEY(1, 2, KEY_BACKSPACE) + MATRIX_KEY(0, 1, KEY_ENTER) + >; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&gpmc { + ethernet@gpmc { + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + reg = <5 0 0xff>; + }; +}; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/dts/omap3-evm-processor-common.dtsi b/arch/arm/dts/omap3-evm-processor-common.dtsi new file mode 100644 index 0000000000..ce7f42f944 --- /dev/null +++ b/arch/arm/dts/omap3-evm-processor-common.dtsi @@ -0,0 +1,216 @@ +/* + * Common support for omap3 EVM 35xx/37xx processor modules + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + }; +}; + +&dss { + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&lcd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = < + &dss_dpi_pins1 + &dss_dpi_pins2 + >; +}; + +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + + dss_dpi_pins1: pinmux_dss_dpi_pins2 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; +}; + +&omap3_pmx_wkup { + dss_dpi_pins2: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for LAN9220 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + }; +}; diff --git a/arch/arm/dts/omap3-evm-u-boot.dtsi b/arch/arm/dts/omap3-evm-u-boot.dtsi new file mode 100644 index 0000000000..53a489988e --- /dev/null +++ b/arch/arm/dts/omap3-evm-u-boot.dtsi @@ -0,0 +1,29 @@ +/* + * U-Boot additions + * + * (C) Copyright 2017 Derald D. Woods + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + chosen { + stdout-path = &uart1; + }; +}; + +&mmc1 { + cd-inverted; +}; + +&uart1 { + reg-shift = <2>; +}; + +&uart2 { + reg-shift = <2>; +}; + +&uart3 { + reg-shift = <2>; +}; diff --git a/arch/arm/dts/omap3-evm.dts b/arch/arm/dts/omap3-evm.dts new file mode 100644 index 0000000000..21a3b88aef --- /dev/null +++ b/arch/arm/dts/omap3-evm.dts @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-evm-common.dtsi" +#include "omap3-evm-processor-common.dtsi" + +/ { + model = "TI OMAP35XX EVM (TMDSEVM3530)"; + compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3"; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&gpmc { + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16abdhc"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi new file mode 100644 index 0000000000..b8b9fcc41e --- /dev/null +++ b/arch/arm/dts/omap3-panel-sharp-ls037v7dw01.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common file for omap dpi panels with QVGA and reset pins + * + * Note that the board specifc DTS file needs to specify + * at minimum the GPIO enable-gpios for display, and + * gpios for gpio-backlight. + */ + +/ { + aliases { + display0 = &lcd0; + }; + + backlight0: backlight { + compatible = "gpio-backlight"; + default-on; + }; + + /* 3.3V GPIO controlled regulator for LCD_ENVDD */ + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + }; + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + label = "lcd"; + power-supply = <&lcd_3v3>; + envdd-supply = <&lcd_3v3>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <18>; + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + vcc-supply = <&lcd_3v3>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + ti,swap-xy; + wakeup-source; + }; +}; diff --git a/arch/arm/dts/omap34xx.dtsi b/arch/arm/dts/omap34xx.dtsi new file mode 100644 index 0000000000..ac4f8795b7 --- /dev/null +++ b/arch/arm/dts/omap34xx.dtsi @@ -0,0 +1,84 @@ +/* + * Device Tree Source for OMAP34xx/OMAP35xx SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include + +#include "omap3.dtsi" + +/ { + cpus { + cpu: cpu@0 { + /* OMAP343x/OMAP35xx variants OPP1-5 */ + operating-points = < + /* kHz uV */ + 125000 975000 + 250000 1075000 + 500000 1200000 + 550000 1270000 + 600000 1350000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + ocp@68000000 { + omap3_pmx_core2: pinmux@480025d8 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x480025d8 0x24>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x017c>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x6c>; + ti,phy-type = ; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + bandgap: bandgap@48002524 { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal_zones: thermal-zones { + #include "omap3-cpu-thermal.dtsi" + }; +}; + +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + +/include/ "omap34xx-omap36xx-clocks.dtsi" +/include/ "omap36xx-omap3430es2plus-clocks.dtsi" +/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" -- cgit