From e630afe1debc71b799548bdc6aa6bfbb02a12953 Mon Sep 17 00:00:00 2001 From: Andreas Dannenberg Date: Thu, 15 Aug 2019 15:55:28 -0500 Subject: arm: K3: common: Allow for early console functionality Implement an early console functionality in SPL that can be used before the main console is being brought up. This helps in situations where the main console is dependent on System Firmware (SYSFW) being up and running, which is usually not the case during the very early stages of boot. Using this early console functionality will allow for an alternate serial port to be used to support things like UART-based boot and early diagnostic messages until the main console is ready to get activated. Signed-off-by: Andreas Dannenberg --- arch/arm/mach-k3/Kconfig | 21 +++++++++++++++++++++ arch/arm/mach-k3/common.c | 26 ++++++++++++++++++++++++++ arch/arm/mach-k3/common.h | 1 + 3 files changed, 48 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index de1c1cc73f..5583241943 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -66,6 +66,27 @@ config SYS_K3_BOOT_CORE_ID int default 16 +config K3_EARLY_CONS + bool "Activate to allow for an early console during SPL" + depends on SPL + help + Turn this option on to enable an early console functionality in SPL + before the main console is being brought up. This can be useful in + situations where the main console is dependent on System Firmware + (SYSFW) being up and running, which is usually not the case during + the very early stages of boot. Using this early console functionality + will allow for an alternate serial port to be used to support things + like UART-based boot and early diagnostic messages until the main + console is ready to get activated. + +config K3_EARLY_CONS_IDX + depends on K3_EARLY_CONS + int "Index of serial device to use for SPL early console" + default 1 + help + Use this option to set the index of the serial device to be used + for the early console during SPL execution. + config K3_LOAD_SYSFW bool depends on SPL diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index c16afc654f..6c453b9af4 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -27,6 +27,32 @@ struct ti_sci_handle *get_ti_sci_handle(void) return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev); } +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_K3_EARLY_CONS +int early_console_init(void) +{ + struct udevice *dev; + int ret; + + gd->baudrate = CONFIG_BAUDRATE; + + ret = uclass_get_device_by_seq(UCLASS_SERIAL, CONFIG_K3_EARLY_CONS_IDX, + &dev); + if (ret) { + printf("Error getting serial dev for early console! (%d)\n", + ret); + return ret; + } + + gd->cur_serial_dev = dev; + gd->flags |= GD_FLG_SERIAL_READY; + gd->have_console = 1; + + return 0; +} +#endif + #ifdef CONFIG_SYS_K3_SPL_ATF void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index ac7e80d9af..ab68e14de8 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -9,3 +9,4 @@ #include void setup_k3_mpu_regions(void); +int early_console_init(void); -- cgit