From f1683aa73c31db0a025e0254e6ce1ee7e56aad3e Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 6 Apr 2017 12:47:05 -0600 Subject: board_f: Rename initdram() to dram_init() This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass [trini: Dummy function on nios2] Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc5xxx/spl_boot.c | 4 ++-- arch/powerpc/cpu/mpc85xx/cpu.c | 4 ++-- arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c | 10 +++++----- arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c | 8 ++++---- arch/powerpc/cpu/ppc4xx/sdram.c | 4 ++-- arch/powerpc/cpu/ppc4xx/spl_boot.c | 2 +- 6 files changed, 16 insertions(+), 16 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c index 23d2010343..2d7f6c4a93 100644 --- a/arch/powerpc/cpu/mpc5xxx/spl_boot.c +++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c @@ -32,7 +32,7 @@ void board_init_f(ulong bootflag) /* * On MPC5200, the initial RAM (and gd) is located in the internal * SRAM. So we can actually call the preloader console init code - * before calling initdram(). This makes serial output (printf) + * before calling dram_init(). This makes serial output (printf) * available very early, even before SDRAM init, which has been * an U-Boot priciple from day 1. */ @@ -62,7 +62,7 @@ void board_init_f(ulong bootflag) * First we need to initialize the SDRAM, so that the real * U-Boot or the OS (Linux) can be loaded */ - initdram(); + dram_init(); /* Clear bss */ memset(__bss_start, '\0', __bss_end - __bss_start); diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 64e0aa7518..e3ef4ae816 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -401,7 +401,7 @@ void mpc85xx_reginfo(void) #ifndef CONFIG_FSL_CORENET #if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \ !defined(CONFIG_SYS_INIT_L2_ADDR) -int initdram(void) +int dram_init(void) { #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \ defined(CONFIG_ARCH_QEMU_E500) @@ -413,7 +413,7 @@ int initdram(void) return 0; } #else /* CONFIG_SYS_RAMBOOT */ -int initdram(void) +int dram_init(void) { phys_size_t dram_size = 0; diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index 87fd5e65e0..ffc62a5849 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -403,20 +403,20 @@ static unsigned char spd_read(uchar chip, uint addr) } /*-----------------------------------------------------------------------------+ - * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller. + * dram_init. Initializes the 440SP Memory Queue and DDR SDRAM controller. * Note: This routine runs from flash with a stack set up in the chip's * sram space. It is important that the routine does not require .sbss, .bss or * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures SDRAM memory banks for DDR operation. * Auto Memory Configuration option reads the DDR SDRAM EEPROMs * via the IIC bus and then configures the DDR SDRAM memory * banks appropriately. If Auto Memory Configuration is * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE}; @@ -2855,13 +2855,13 @@ static void test(void) #else /* CONFIG_SPD_EEPROM */ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller. * The configuration is performed using static, compile- * time parameters. * Configures the PPC405EX(r) and PPC460EX/GT *---------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned long val; diff --git a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c index 14d0fd9154..c477853fb8 100644 --- a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c @@ -987,20 +987,20 @@ static void program_ddr0_44(unsigned long dimm_ranks[], } /*-----------------------------------------------------------------------------+ - * initdram. Initializes the 440EPx/GPx DDR SDRAM controller. + * dram_init. Initializes the 440EPx/GPx DDR SDRAM controller. * Note: This routine runs from flash with a stack set up in the chip's * sram space. It is important that the routine does not require .sbss, .bss or * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: dram_init * Description: Configures SDRAM memory banks for DDR operation. * Auto Memory Configuration option reads the DDR SDRAM EEPROMs * via the IIC bus and then configures the DDR SDRAM memory * banks appropriately. If Auto Memory Configuration is * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ -int initdram(void) +int dram_init(void) { unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_ranks[MAXDIMMS]; @@ -1014,7 +1014,7 @@ int initdram(void) unsigned long cas_latency = 0; /* to quiet initialization warning */ unsigned long dram_size; - debug("\nEntering initdram()\n"); + debug("\nEntering dram_init()\n"); /*------------------------------------------------------------------ * Stop the DDR-SDRAM controller. diff --git a/arch/powerpc/cpu/ppc4xx/sdram.c b/arch/powerpc/cpu/ppc4xx/sdram.c index a49bd69aba..c416bcebf6 100644 --- a/arch/powerpc/cpu/ppc4xx/sdram.c +++ b/arch/powerpc/cpu/ppc4xx/sdram.c @@ -150,7 +150,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh) /* * Autodetect onboard SDRAM on 405 platforms */ -int initdram(void) +int dram_init(void) { ulong speed; ulong sdtr1; @@ -353,7 +353,7 @@ static void sdram_tr1_set(int ram_address, int* tr1_value) * so this should be extended for other future boards * using this routine! */ -int initdram(void) +int dram_init(void) { int i; int tr1_bank1; diff --git a/arch/powerpc/cpu/ppc4xx/spl_boot.c b/arch/powerpc/cpu/ppc4xx/spl_boot.c index f3aa46c4f1..b30f169e89 100644 --- a/arch/powerpc/cpu/ppc4xx/spl_boot.c +++ b/arch/powerpc/cpu/ppc4xx/spl_boot.c @@ -26,7 +26,7 @@ void board_init_f(ulong bootflag) * First we need to initialize the SDRAM, so that the real * U-Boot or the OS (Linux) can be loaded */ - initdram(); + dram_init(); /* Clear bss */ memset(__bss_start, '\0', __bss_end - __bss_start); -- cgit