From 72bcbd4bfb99a68d11dabce6a2a13f4c499cdd4d Mon Sep 17 00:00:00 2001 From: Francois Retief Date: Sat, 24 Oct 2015 23:14:55 +0200 Subject: sparc: Fix broken files during license changes Fixes broken search and replaced license changes in files cpu/leon3/start.S and include/asm/winmacro.h from commit 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Signed-off-by: Francois Retief Series-to: u-boot Series-cc: Tom Rini Series-version: 2 Cover-letter: sparc: Updates to SPARC architecture in preperation for generic board This patch series is a backlog of preparation work for upcomming generic board changes. I first want to get these reviewed and submitted to mainline before sending out more patches. END --- arch/sparc/cpu/leon3/start.S | 3 - arch/sparc/include/asm/winmacro.h | 127 -------------------------------------- 2 files changed, 130 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index cf897f6877..5f904faf71 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -2,9 +2,6 @@ * Copyright (C) 2007, * Daniel Hellstrom, daniel@gaisler.com * - * See file CREDITS for list of people who contributed to this - * project. - * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h index 65e4561e7d..4f68fbda69 100644 --- a/arch/sparc/include/asm/winmacro.h +++ b/arch/sparc/include/asm/winmacro.h @@ -136,130 +136,3 @@ ld [reg + FW_FSR], %fsr; #endif - -#ifndef __SPARC_WINMACRO_H__ -#define __SPARC_WINMACRO_H__ - -#include -#include - -/* Store the register window onto the 8-byte aligned area starting - * at %reg. It might be %sp, it might not, we don't care. - */ -#define RW_STORE(reg) \ - std %l0, [%reg + RW_L0]; \ - std %l2, [%reg + RW_L2]; \ - std %l4, [%reg + RW_L4]; \ - std %l6, [%reg + RW_L6]; \ - std %i0, [%reg + RW_I0]; \ - std %i2, [%reg + RW_I2]; \ - std %i4, [%reg + RW_I4]; \ - std %i6, [%reg + RW_I6]; - -/* Load a register window from the area beginning at %reg. */ -#define RW_LOAD(reg) \ - ldd [%reg + RW_L0], %l0; \ - ldd [%reg + RW_L2], %l2; \ - ldd [%reg + RW_L4], %l4; \ - ldd [%reg + RW_L6], %l6; \ - ldd [%reg + RW_I0], %i0; \ - ldd [%reg + RW_I2], %i2; \ - ldd [%reg + RW_I4], %i4; \ - ldd [%reg + RW_I6], %i6; - -/* Loading and storing struct pt_reg trap frames. */ -#define PT_LOAD_INS(base_reg) \ - ldd [%base_reg + SF_REGS_SZ + PT_I0], %i0; \ - ldd [%base_reg + SF_REGS_SZ + PT_I2], %i2; \ - ldd [%base_reg + SF_REGS_SZ + PT_I4], %i4; \ - ldd [%base_reg + SF_REGS_SZ + PT_I6], %i6; - -#define PT_LOAD_GLOBALS(base_reg) \ - ld [%base_reg + SF_REGS_SZ + PT_G1], %g1; \ - ldd [%base_reg + SF_REGS_SZ + PT_G2], %g2; \ - ldd [%base_reg + SF_REGS_SZ + PT_G4], %g4; \ - ldd [%base_reg + SF_REGS_SZ + PT_G6], %g6; - -#define PT_LOAD_YREG(base_reg, scratch) \ - ld [%base_reg + SF_REGS_SZ + PT_Y], %scratch; \ - wr %scratch, 0x0, %y; - -#define PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ - ld [%base_reg + SF_REGS_SZ + PT_PSR], %pt_psr; \ - ld [%base_reg + SF_REGS_SZ + PT_PC], %pt_pc; \ - ld [%base_reg + SF_REGS_SZ + PT_NPC], %pt_npc; - -#define PT_LOAD_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \ - PT_LOAD_YREG(base_reg, scratch) \ - PT_LOAD_INS(base_reg) \ - PT_LOAD_GLOBALS(base_reg) \ - PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) - -#define PT_STORE_INS(base_reg) \ - std %i0, [%base_reg + SF_REGS_SZ + PT_I0]; \ - std %i2, [%base_reg + SF_REGS_SZ + PT_I2]; \ - std %i4, [%base_reg + SF_REGS_SZ + PT_I4]; \ - std %i6, [%base_reg + SF_REGS_SZ + PT_I6]; - -#define PT_STORE_GLOBALS(base_reg) \ - st %g1, [%base_reg + SF_REGS_SZ + PT_G1]; \ - std %g2, [%base_reg + SF_REGS_SZ + PT_G2]; \ - std %g4, [%base_reg + SF_REGS_SZ + PT_G4]; \ - std %g6, [%base_reg + SF_REGS_SZ + PT_G6]; - -#define PT_STORE_YREG(base_reg, scratch) \ - rd %y, %scratch; \ - st %scratch, [%base_reg + SF_REGS_SZ + PT_Y]; - -#define PT_STORE_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ - st %pt_psr, [%base_reg + SF_REGS_SZ + PT_PSR]; \ - st %pt_pc, [%base_reg + SF_REGS_SZ + PT_PC]; \ - st %pt_npc, [%base_reg + SF_REGS_SZ + PT_NPC]; - -#define PT_STORE_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \ - PT_STORE_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \ - PT_STORE_GLOBALS(base_reg) \ - PT_STORE_YREG(base_reg, g_scratch) \ - PT_STORE_INS(base_reg) - -/* Store the fpu register window*/ -#define FW_STORE(reg) \ - std %f0, [reg + FW_F0]; \ - std %f2, [reg + FW_F2]; \ - std %f4, [reg + FW_F4]; \ - std %f6, [reg + FW_F6]; \ - std %f8, [reg + FW_F8]; \ - std %f10, [reg + FW_F10]; \ - std %f12, [reg + FW_F12]; \ - std %f14, [reg + FW_F14]; \ - std %f16, [reg + FW_F16]; \ - std %f18, [reg + FW_F18]; \ - std %f20, [reg + FW_F20]; \ - std %f22, [reg + FW_F22]; \ - std %f24, [reg + FW_F24]; \ - std %f26, [reg + FW_F26]; \ - std %f28, [reg + FW_F28]; \ - std %f30, [reg + FW_F30]; \ - st %fsr, [reg + FW_FSR]; - -/* Load a fpu register window from the area beginning at reg. */ -#define FW_LOAD(reg) \ - ldd [reg + FW_F0], %f0; \ - ldd [reg + FW_F2], %f2; \ - ldd [reg + FW_F4], %f4; \ - ldd [reg + FW_F6], %f6; \ - ldd [reg + FW_F8], %f8; \ - ldd [reg + FW_F10], %f10; \ - ldd [reg + FW_F12], %f12; \ - ldd [reg + FW_F14], %f14; \ - ldd [reg + FW_F16], %f16; \ - ldd [reg + FW_F18], %f18; \ - ldd [reg + FW_F20], %f20; \ - ldd [reg + FW_F22], %f22; \ - ldd [reg + FW_F24], %f24; \ - ldd [reg + FW_F26], %f26; \ - ldd [reg + FW_F28], %f28; \ - ldd [reg + FW_F30], %f30; \ - ld [reg + FW_FSR], %fsr; - -#endif -- cgit From c33759aebdb390ba20fa40a97e9d6f3cd19371f6 Mon Sep 17 00:00:00 2001 From: Francois Retief Date: Mon, 26 Oct 2015 12:27:15 +0200 Subject: sparc: Add -mcpu= compiler flags for LEON2/LEON3 Signed-off-by: Francois Retief --- arch/sparc/config.mk | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk index d615f294fe..43faad48ce 100644 --- a/arch/sparc/config.mk +++ b/arch/sparc/config.mk @@ -1,19 +1,25 @@ # -# (C) Copyright 2007 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com +# (C) Copyright 2015 +# Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. # # SPDX-License-Identifier: GPL-2.0+ # ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := sparc-elf- +CROSS_COMPILE := sparc-linux- endif +# This GCC compiler is known to work: +# https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ + gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \ -T $(srctree)/examples/standalone/sparc.lds -PLATFORM_CPPFLAGS += -D__sparc__ +cpuflags-$(CONFIG_LEON2) := -mcpu=leon +cpuflags-$(CONFIG_LEON3) := -mcpu=leon3 + +PLATFORM_CPPFLAGS += $(cpuflags-y) PLATFORM_RELFLAGS += -fPIC -- cgit From a50adb7b4d86b924789dbe437ae92006d2f654f8 Mon Sep 17 00:00:00 2001 From: Francois Retief Date: Wed, 28 Oct 2015 10:35:12 +0200 Subject: sparc: Update LEON serial drivers to use readl/writel macros Update the LEON2/3 serial driver to make use of the readl and writel macros as well as the WATCHDOG_RESET() macro. Add readl/writel and friends to the asm/io.h file. Introduce the gd->arch.uart variable to store register address. Lastly, remove baudrate scaler macro variables from board config. It is now calculated in the serial driver using the global data variable. Signed-off-by: Francois Retief --- arch/sparc/cpu/leon2/serial.c | 125 +++++++++++++++++------------------ arch/sparc/cpu/leon3/prom.c | 5 +- arch/sparc/cpu/leon3/serial.c | 100 ++++++++++++++++------------ arch/sparc/include/asm/global_data.h | 1 + arch/sparc/include/asm/io.h | 64 ++++++++++-------- 5 files changed, 157 insertions(+), 138 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c index 5cfbb9ed15..603364ee0b 100644 --- a/arch/sparc/cpu/leon2/serial.c +++ b/arch/sparc/cpu/leon2/serial.c @@ -1,72 +1,78 @@ /* GRLIB APBUART Serial controller driver * - * (C) Copyright 2008 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. + * (C) Copyright 2008, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. * * SPDX-License-Identifier: GPL-2.0+ */ #include -#include -#include +#include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; +static unsigned leon2_serial_calc_scaler(unsigned freq, unsigned baud) +{ + return (((freq*10) / (baud*8)) - 5) / 10; +} + static int leon2_serial_init(void) { - LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; + LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS; LEON2_Uart_regs *regs; unsigned int tmp; - /* Init LEON2 UART - * - * Set scaler / baud rate - * - * Receiver & transmitter enable - */ #if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1 - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1; + regs = (LEON2_Uart_regs *)&leon2->UART_Channel_1; #else - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2; + regs = (LEON2_Uart_regs *)&leon2->UART_Channel_2; #endif - regs->UART_Scaler = CONFIG_SYS_LEON2_UART1_SCALER; + /* Set scaler / baud rate */ + tmp = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE); + writel(tmp, ®s->UART_Scaler); /* Let bit 11 be unchanged (debug bit for GRMON) */ - tmp = READ_WORD(regs->UART_Control); + tmp = readl(®s->UART_Control) & LEON2_UART_CTRL_DBG; + tmp |= (LEON2_UART1_LOOPBACK_ENABLE << 7); + tmp |= (LEON2_UART1_FLOWCTRL_ENABLE << 6); + tmp |= (LEON2_UART1_PARITY_ENABLE << 5); + tmp |= (LEON2_UART1_ODDPAR_ENABLE << 4); + /* Receiver & transmitter enable */ + tmp |= (LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE); + writel(tmp, ®s->UART_Control); + + gd->arch.uart = regs; + return 0; +} - regs->UART_Control = ((tmp & LEON2_UART_CTRL_DBG) | - (LEON2_UART1_LOOPBACK_ENABLE << 7) | - (LEON2_UART1_FLOWCTRL_ENABLE << 6) | - (LEON2_UART1_PARITY_ENABLE << 5) | - (LEON2_UART1_ODDPAR_ENABLE << 4) | - LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE); +static inline LEON2_Uart_regs *leon2_get_uart_regs(void) +{ + LEON2_Uart_regs *uart = gd->arch.uart; - return 0; + return uart; } static void leon2_serial_putc_raw(const char c) { - LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; - LEON2_Uart_regs *regs; + LEON2_Uart_regs *uart = leon2_get_uart_regs(); -#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1 - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1; -#else - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2; -#endif + if (!uart) + return; /* Wait for last character to go. */ - while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_THE)) ; + while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_THE)) + WATCHDOG_RESET(); /* Send data */ - regs->UART_Channel = c; + writel(c, &uart->UART_Channel); #ifdef LEON_DEBUG /* Wait for data to be sent */ - while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_TSE)) ; + while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_TSE)) + WATCHDOG_RESET(); #endif } @@ -80,56 +86,43 @@ static void leon2_serial_putc(const char c) static int leon2_serial_getc(void) { - LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; - LEON2_Uart_regs *regs; + LEON2_Uart_regs *uart = leon2_get_uart_regs(); -#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1 - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1; -#else - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2; -#endif + if (!uart) + return 0; /* Wait for a character to arrive. */ - while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR)) ; + while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_DR)) + WATCHDOG_RESET(); - /* read data */ - return READ_WORD(regs->UART_Channel); + /* Read character data */ + return readl(&uart->UART_Channel); } static int leon2_serial_tstc(void) { - LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; - LEON2_Uart_regs *regs; + LEON2_Uart_regs *uart = leon2_get_uart_regs(); -#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1 - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1; -#else - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2; -#endif + if (!uart) + return 0; - return (READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR); + return readl(&uart->UART_Status) & LEON2_UART_STAT_DR; } -/* set baud rate for uart */ static void leon2_serial_setbrg(void) { - /* update baud rate settings, read it from gd->baudrate */ + LEON2_Uart_regs *uart = leon2_get_uart_regs(); unsigned int scaler; - LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; - LEON2_Uart_regs *regs; -#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1 - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1; -#else - regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2; -#endif + if (!uart) + return; + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + scaler = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE); - if (gd->baudrate > 0) { - scaler = - (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) - - 5) / 10; - regs->UART_Scaler = scaler; - } + writel(scaler, &uart->UART_Scaler); } static struct serial_device leon2_serial_drv = { diff --git a/arch/sparc/cpu/leon3/prom.c b/arch/sparc/cpu/leon3/prom.c index b83776bc06..d0f18603a1 100644 --- a/arch/sparc/cpu/leon3/prom.c +++ b/arch/sparc/cpu/leon3/prom.c @@ -21,7 +21,8 @@ #define PRINT_ROM_VEC */ extern struct linux_romvec *kernel_arg_promvec; -extern ambapp_dev_apbuart *leon3_apbuart; + +DECLARE_GLOBAL_DATA_PTR; #define PROM_PGT __attribute__ ((__section__ (".prom.pgt"))) #define PROM_TEXT __attribute__ ((__section__ (".prom.text"))) @@ -909,7 +910,7 @@ void leon_prom_init(struct leon_prom_info *pspi) pspi->avail.num_bytes = pspi->totphys.num_bytes; /* Set the pointer to the Console UART in romvec */ - pspi->reloc_funcs.leon3_apbuart = leon3_apbuart; + pspi->reloc_funcs.leon3_apbuart = gd->arch.uart; { int j = 1; diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index bca6b6548b..f1dcab3377 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -1,66 +1,70 @@ /* GRLIB APBUART Serial controller driver * - * (C) Copyright 2007 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. + * (C) Copyright 2007, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. * * SPDX-License-Identifier: GPL-2.0+ */ #include -#include -#include +#include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; -ambapp_dev_apbuart *leon3_apbuart = NULL; - static int leon3_serial_init(void) { + ambapp_dev_apbuart *uart; ambapp_apbdev apbdev; unsigned int tmp; /* find UART */ - if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) == 1) { + if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) != 1) + return -1; /* didn't find hardware */ - leon3_apbuart = (ambapp_dev_apbuart *) apbdev.address; + /* found apbuart, let's init .. */ + uart = (ambapp_dev_apbuart *) apbdev.address; - /* found apbuart, let's init... - * - * Set scaler / baud rate - * - * Receiver & transmitter enable - */ - leon3_apbuart->scaler = CONFIG_SYS_GRLIB_APBUART_SCALER; + /* Set scaler / baud rate */ + tmp = (((CONFIG_SYS_CLK_FREQ*10) / (CONFIG_BAUDRATE*8)) - 5)/10; + writel(tmp, &uart->scaler); - /* Let bit 11 be unchanged (debug bit for GRMON) */ - tmp = READ_WORD(leon3_apbuart->ctrl); + /* Let bit 11 be unchanged (debug bit for GRMON) */ + tmp = readl(&uart->ctrl) & LEON_REG_UART_CTRL_DBG; + /* Receiver & transmitter enable */ + tmp |= LEON_REG_UART_CTRL_RE | LEON_REG_UART_CTRL_TE; + writel(tmp, &uart->ctrl); - leon3_apbuart->ctrl = ((tmp & LEON_REG_UART_CTRL_DBG) | - LEON_REG_UART_CTRL_RE | - LEON_REG_UART_CTRL_TE); + gd->arch.uart = uart; + return 0; +} - return 0; - } - return -1; /* didn't find hardware */ +static inline ambapp_dev_apbuart *leon3_get_uart_regs(void) +{ + ambapp_dev_apbuart *uart = gd->arch.uart; + return uart; } static void leon3_serial_putc_raw(const char c) { - if (!leon3_apbuart) + ambapp_dev_apbuart * const uart = leon3_get_uart_regs(); + + if (!uart) return; /* Wait for last character to go. */ - while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_THE)) ; + while (!(readl(&uart->status) & LEON_REG_UART_STATUS_THE)) + WATCHDOG_RESET(); /* Send data */ - leon3_apbuart->data = c; + writel(c, &uart->data); #ifdef LEON_DEBUG /* Wait for data to be sent */ - while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_TSE)) ; + while (!(readl(&uart->status) & LEON_REG_UART_STATUS_TSE)) + WATCHDOG_RESET(); #endif } @@ -74,36 +78,44 @@ static void leon3_serial_putc(const char c) static int leon3_serial_getc(void) { - if (!leon3_apbuart) + ambapp_dev_apbuart * const uart = leon3_get_uart_regs(); + + if (!uart) return 0; /* Wait for a character to arrive. */ - while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_DR)) ; + while (!(readl(&uart->status) & LEON_REG_UART_STATUS_DR)) + WATCHDOG_RESET(); - /* read data */ - return READ_WORD(leon3_apbuart->data); + /* Read character data */ + return readl(&uart->data); } static int leon3_serial_tstc(void) { - if (leon3_apbuart) - return (READ_WORD(leon3_apbuart->status) & - LEON_REG_UART_STATUS_DR); - return 0; + ambapp_dev_apbuart * const uart = leon3_get_uart_regs(); + + if (!uart) + return 0; + + return readl(&uart->status) & LEON_REG_UART_STATUS_DR; } /* set baud rate for uart */ static void leon3_serial_setbrg(void) { - /* update baud rate settings, read it from gd->baudrate */ + ambapp_dev_apbuart * const uart = leon3_get_uart_regs(); unsigned int scaler; - if (leon3_apbuart && (gd->baudrate > 0)) { - scaler = - (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) - - 5) / 10; - leon3_apbuart->scaler = scaler; - } - return; + + if (!uart) + return; + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + scaler = (((CONFIG_SYS_CLK_FREQ*10) / (gd->baudrate*8)) - 5)/10; + + writel(scaler, &uart->scaler); } static struct serial_device leon3_serial_drv = { diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h index 667e7d6d3b..0680a56758 100644 --- a/arch/sparc/include/asm/global_data.h +++ b/arch/sparc/include/asm/global_data.h @@ -15,6 +15,7 @@ /* Architecture-specific global data */ struct arch_global_data { + void *uart; }; #include diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h index f7b89c890f..a317d132be 100644 --- a/arch/sparc/include/asm/io.h +++ b/arch/sparc/include/asm/io.h @@ -1,7 +1,7 @@ /* SPARC I/O definitions * - * (C) Copyright 2007 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. + * (C) Copyright 2007, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -12,45 +12,57 @@ /* Nothing to sync, total store ordering (TSO)... */ #define sync() +/* + * Generic virtual read/write. + */ + +#ifndef CONFIG_SYS_HAS_NO_CACHE + /* Forces a cache miss on read/load. * On some architectures we need to bypass the cache when reading * I/O registers so that we are not reading the same status word * over and over again resulting in a hang (until an IRQ if lucky) - * */ -#ifndef CONFIG_SYS_HAS_NO_CACHE -#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)(var)) -#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)(var)) -#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)(var)) -#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)(var)) + +#define __arch_getb(a) SPARC_NOCACHE_READ_BYTE((unsigned int)(a)) +#define __arch_getw(a) SPARC_NOCACHE_READ_HWORD((unsigned int)(a)) +#define __arch_getl(a) SPARC_NOCACHE_READ((unsigned int)(a)) +#define __arch_getq(a) SPARC_NOCACHE_READ_DWORD((unsigned int)(a)) + #else -#define READ_BYTE(var) (var) -#define READ_HWORD(var) (var) -#define READ_WORD(var) (var) -#define READ_DWORD(var) (var) -#endif -/* - * Generic virtual read/write. - */ -#define __arch_getb(a) (READ_BYTE(a)) -#define __arch_getw(a) (READ_HWORD(a)) -#define __arch_getl(a) (READ_WORD(a)) -#define __arch_getq(a) (READ_DWORD(a)) +#define __arch_getb(a) (*(volatile unsigned char *)(a)) +#define __arch_getw(a) (*(volatile unsigned short *)(a)) +#define __arch_getl(a) (*(volatile unsigned int *)(a)) +#define __arch_getq(a) (*(volatile unsigned long long *)(a)) + +#endif /* CONFIG_SYS_HAS_NO_CACHE */ -#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v)) -#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) -#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __arch_putb(v, a) (*(volatile unsigned char *)(a) = (v)) +#define __arch_putw(v, a) (*(volatile unsigned short *)(a) = (v)) +#define __arch_putl(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __arch_putq(v, a) (*(volatile unsigned long long *)(a) = (v)) -#define __raw_writeb(v,a) __arch_putb(v,a) -#define __raw_writew(v,a) __arch_putw(v,a) -#define __raw_writel(v,a) __arch_putl(v,a) +#define __raw_writeb(v, a) __arch_putb(v, a) +#define __raw_writew(v, a) __arch_putw(v, a) +#define __raw_writel(v, a) __arch_putl(v, a) +#define __raw_writeq(v, a) __arch_putq(v, a) #define __raw_readb(a) __arch_getb(a) #define __raw_readw(a) __arch_getw(a) #define __raw_readl(a) __arch_getl(a) #define __raw_readq(a) __arch_getq(a) +#define writeb __raw_writeb +#define writew __raw_writew +#define writel __raw_writel +#define writeq __raw_writeq + +#define readb __raw_readb +#define readw __raw_readw +#define readl __raw_readl +#define readq __raw_readq + /* * Given a physical address and a length, return a virtual address * that can be used to access the memory range with the caching -- cgit From 0070109f683657ba3f864792ae134f74282ae4e8 Mon Sep 17 00:00:00 2001 From: Francois Retief Date: Wed, 28 Oct 2015 09:06:41 +0200 Subject: sparc: Update startup code to take PIC mode into account Signed-off-by: Francois Retief --- arch/sparc/cpu/leon2/start.S | 60 ++++++++++++++++++++++++++++++-------------- arch/sparc/cpu/leon3/start.S | 60 ++++++++++++++++++++++++++++++-------------- 2 files changed, 82 insertions(+), 38 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S index e43097cf9b..974de76852 100644 --- a/arch/sparc/cpu/leon2/start.S +++ b/arch/sparc/cpu/leon2/start.S @@ -57,6 +57,27 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) #error Must define number of SPARC register windows, default is 8 #endif +/* Macros to load address into a register. Uses GOT table for PIC */ +#ifdef __PIC__ + +#define SPARC_PIC_THUNK_CALL(reg) \ + sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \ + call __sparc_get_pc_thunk.reg; \ + add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg; + +#define SPARC_LOAD_ADDRESS(sym, got, reg) \ + sethi %gdop_hix22(sym), %##reg; \ + xor %##reg, %gdop_lox10(sym), %##reg; \ + ld [%##got + %##reg], %##reg, %gdop(sym); + +#else + +#define SPARC_PIC_THUNK_CALL(reg) +#define SPARC_LOAD_ADDRESS(sym, got, tmp) \ + set sym, %##reg; + +#endif + #define STACK_ALIGN 8 #define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) @@ -278,7 +299,7 @@ leon2_init_mctrl: srl %g2, 30, %g2 andcc %g2, 3, %g6 bne,a leon2_init_wim - mov %g0, %asr16 ! clear err_reg + mov %g0, %asr16 ! clear err_reg leon2_init_wim: set WIM_INIT, %g3 @@ -299,7 +320,7 @@ leon2_init_stackp: cpu_init_unreloc: call cpu_init_f - nop + nop /* un relocated start address of monitor */ #define TEXT_START _text @@ -307,9 +328,10 @@ cpu_init_unreloc: /* un relocated end address of monitor */ #define DATA_END __init_end + SPARC_PIC_THUNK_CALL(l7) reloc: - set TEXT_START,%g2 - set DATA_END,%g3 + SPARC_LOAD_ADDRESS(TEXT_START, l7, g2) + SPARC_LOAD_ADDRESS(DATA_END, l7, g3) set CONFIG_SYS_RELOC_MONITOR_BASE,%g4 reloc_loop: ldd [%g2],%l0 @@ -319,7 +341,7 @@ reloc_loop: inc 16,%g2 subcc %g3,%g2,%g0 bne reloc_loop - inc 16,%g4 + inc 16,%g4 clr %l0 clr %l1 @@ -336,8 +358,8 @@ reloc_loop: clr_bss: /* clear bss area (the relocated) */ - set __bss_start,%g2 - set __bss_end,%g3 + SPARC_LOAD_ADDRESS(__bss_start, l7, g2) + SPARC_LOAD_ADDRESS(__bss_end, l7, g3) sub %g3,%g2,%g3 add %g3,%g4,%g3 clr %g1 /* std %g0 uses g0 and g1 */ @@ -348,19 +370,19 @@ clr_bss_16: inc 16,%g4 cmp %g3,%g4 bne clr_bss_16 - nop + nop /* add offsets to GOT table */ fixup_got: - set __got_start,%g4 - set __got_end,%g3 + SPARC_LOAD_ADDRESS(__got_start, l7, g4) + SPARC_LOAD_ADDRESS(__got_end, l7, g3) /* * new got offset = (old GOT-PTR (read with ld) - * CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) + * Destination Address (from define) */ set CONFIG_SYS_RELOC_MONITOR_BASE,%g2 - set TEXT_START, %g1 + SPARC_LOAD_ADDRESS(TEXT_START, l7, g1) add %g4,%g2,%g4 sub %g4,%g1,%g4 add %g3,%g2,%g3 @@ -375,11 +397,11 @@ got_loop: inc 4,%g4 cmp %g3,%g4 bne got_loop - nop + nop prom_relocate: - set __prom_start, %g2 - set __prom_end, %g3 + SPARC_LOAD_ADDRESS(__prom_start, l7, g2) + SPARC_LOAD_ADDRESS(__prom_end, l7, g3) set CONFIG_SYS_PROM_OFFSET, %g4 prom_relocate_loop: @@ -390,7 +412,7 @@ prom_relocate_loop: inc 16,%g2 subcc %g3,%g2,%g0 bne prom_relocate_loop - inc 16,%g4 + inc 16,%g4 /* Trap table has been moved, lets tell CPU about * the new trap table address @@ -403,19 +425,19 @@ prom_relocate_loop: nop /* Call relocated init functions */ jump: - set cpu_init_f2,%o1 + SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1) set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 add %o1,%o2,%o1 sub %o1,%g1,%o1 call %o1 - clr %o0 + clr %o0 - set board_init_f,%o1 + SPARC_LOAD_ADDRESS(board_init_f, l7, o1) set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 add %o1,%o2,%o1 sub %o1,%g1,%o1 call %o1 - clr %o0 + clr %o0 dead: ta 0 ! if call returns... nop diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index 5f904faf71..be9b3fb20b 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -57,6 +57,27 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) #error Must define number of SPARC register windows, default is 8 #endif +/* Macros to load address into a register. Uses GOT table for PIC */ +#ifdef __PIC__ + +#define SPARC_PIC_THUNK_CALL(reg) \ + sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \ + call __sparc_get_pc_thunk.reg; \ + add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg; + +#define SPARC_LOAD_ADDRESS(sym, got, reg) \ + sethi %gdop_hix22(sym), %##reg; \ + xor %##reg, %gdop_lox10(sym), %##reg; \ + ld [%##got + %##reg], %##reg, %gdop(sym); + +#else + +#define SPARC_PIC_THUNK_CALL(reg) +#define SPARC_LOAD_ADDRESS(sym, got, tmp) \ + set sym, %##reg; + +#endif + #define STACK_ALIGN 8 #define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) @@ -229,7 +250,7 @@ clear_window: bge clear_window save -wininit: +wiminit: set WIM_INIT, %g3 mov %g3, %wim @@ -240,7 +261,7 @@ stackp: cpu_init_unreloc: call cpu_init_f - nop + nop /* un relocated start address of monitor */ #define TEXT_START _text @@ -248,9 +269,10 @@ cpu_init_unreloc: /* un relocated end address of monitor */ #define DATA_END __init_end + SPARC_PIC_THUNK_CALL(l7) reloc: - set TEXT_START,%g2 - set DATA_END,%g3 + SPARC_LOAD_ADDRESS(TEXT_START, l7, g2) + SPARC_LOAD_ADDRESS(DATA_END, l7, g3) set CONFIG_SYS_RELOC_MONITOR_BASE,%g4 reloc_loop: ldd [%g2],%l0 @@ -260,7 +282,7 @@ reloc_loop: inc 16,%g2 subcc %g3,%g2,%g0 bne reloc_loop - inc 16,%g4 + inc 16,%g4 clr %l0 clr %l1 @@ -277,8 +299,8 @@ reloc_loop: clr_bss: /* clear bss area (the relocated) */ - set __bss_start,%g2 - set __bss_end,%g3 + SPARC_LOAD_ADDRESS(__bss_start, l7, g2) + SPARC_LOAD_ADDRESS(__bss_end, l7, g3) sub %g3,%g2,%g3 add %g3,%g4,%g3 clr %g1 /* std %g0 uses g0 and g1 */ @@ -289,19 +311,19 @@ clr_bss_16: inc 16,%g4 cmp %g3,%g4 bne clr_bss_16 - nop + nop /* add offsets to GOT table */ fixup_got: - set __got_start,%g4 - set __got_end,%g3 + SPARC_LOAD_ADDRESS(__got_start, l7, g4) + SPARC_LOAD_ADDRESS(__got_end, l7, g3) /* * new got offset = (old GOT-PTR (read with ld) - * CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) + * Destination Address (from define) */ set CONFIG_SYS_RELOC_MONITOR_BASE,%g2 - set TEXT_START, %g1 + SPARC_LOAD_ADDRESS(TEXT_START, l7, g1) add %g4,%g2,%g4 sub %g4,%g1,%g4 add %g3,%g2,%g3 @@ -316,11 +338,11 @@ got_loop: inc 4,%g4 cmp %g3,%g4 bne got_loop - nop + nop prom_relocate: - set __prom_start, %g2 - set __prom_end, %g3 + SPARC_LOAD_ADDRESS(__prom_start, l7, g2) + SPARC_LOAD_ADDRESS(__prom_end, l7, g3) set CONFIG_SYS_PROM_OFFSET, %g4 prom_relocate_loop: @@ -331,7 +353,7 @@ prom_relocate_loop: inc 16,%g2 subcc %g3,%g2,%g0 bne prom_relocate_loop - inc 16,%g4 + inc 16,%g4 /* Trap table has been moved, lets tell CPU about * the new trap table address @@ -358,19 +380,19 @@ snoop_detect: nop /* Call relocated init functions */ jump: - set cpu_init_f2,%o1 + SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1) set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 add %o1,%o2,%o1 sub %o1,%g1,%o1 call %o1 - clr %o0 + clr %o0 - set board_init_f,%o1 + SPARC_LOAD_ADDRESS(board_init_f, l7, o1) set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 add %o1,%o2,%o1 sub %o1,%g1,%o1 call %o1 - clr %o0 + clr %o0 dead: ta 0 ! if call returns... nop -- cgit From 898cc81da3dd5bfa0f77f1791f76d3512b5e4dce Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Mon, 25 Jan 2010 09:54:51 +0100 Subject: sparc: leon3: Reimplemented AMBA Plug&Play scanning routines. Signed-off-by: Daniel Hellstrom --- arch/sparc/cpu/leon3/Makefile | 3 +- arch/sparc/cpu/leon3/ambapp.c | 544 ++++++++++++------------- arch/sparc/cpu/leon3/ambapp_low.S | 784 ++++++++++++++++++++++++++++++++++++ arch/sparc/cpu/leon3/ambapp_low_c.S | 113 ++++++ arch/sparc/cpu/leon3/cpu_init.c | 184 +++------ arch/sparc/cpu/leon3/serial.c | 8 +- arch/sparc/cpu/leon3/usb_uhci.c | 4 +- 7 files changed, 1225 insertions(+), 415 deletions(-) create mode 100644 arch/sparc/cpu/leon3/ambapp_low.S create mode 100644 arch/sparc/cpu/leon3/ambapp_low_c.S (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/Makefile b/arch/sparc/cpu/leon3/Makefile index 4f13ec3071..c5068a8ecf 100644 --- a/arch/sparc/cpu/leon3/Makefile +++ b/arch/sparc/cpu/leon3/Makefile @@ -6,4 +6,5 @@ # extra-y = start.o -obj-y = cpu_init.o serial.o cpu.o ambapp.o interrupts.o prom.o usb_uhci.o +obj-y = cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \ + interrupts.o prom.o usb_uhci.o diff --git a/arch/sparc/cpu/leon3/ambapp.c b/arch/sparc/cpu/leon3/ambapp.c index a30d1f2a99..bb81338dac 100644 --- a/arch/sparc/cpu/leon3/ambapp.c +++ b/arch/sparc/cpu/leon3/ambapp.c @@ -1,343 +1,315 @@ -/* Gaisler AMBA Plug&Play bus scanning. Functions - * ending on _nomem is inteded to be used only during - * initialization, only registers are used (no ram). +/* GRLIB AMBA Plug&Play information scanning, relies on assembler + * routines. * - * (C) Copyright 2007 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. * * SPDX-License-Identifier: GPL-2.0+ */ +/* #define DEBUG */ + #include -#include #include +#include + +/************ C INTERFACE OF ASSEMBLER SCAN ROUTINES ************/ +struct ambapp_find_apb_info { + /* Address of APB device Plug&Play information */ + struct ambapp_pnp_apb *pnp; + /* AHB Bus index of where the APB-Master Bridge device was found */ + int ahb_bus_index; + int dec_index; +}; -#if defined(CONFIG_CMD_AMBAPP) -extern void ambapp_print_apb(apbctrl_pp_dev * apb, - ambapp_ahbdev * apbmst, int index); -extern void ambapp_print_ahb(ahbctrl_pp_dev * ahb, int index); -extern int ambapp_apb_print; -extern int ambapp_ahb_print; -#endif - -static int ambapp_apb_scan(unsigned int vendor, /* Plug&Play Vendor ID */ - unsigned int driver, /* Plug&Play Device ID */ - ambapp_apbdev * dev, /* Result(s) is placed here */ - int index, /* Index of device to start copying Plug&Play - * info into dev - */ - int max_cnt /* Maximal count that dev can hold, if dev - * is NULL function will stop scanning after - * max_cnt devices are found. - */ - ) -{ - int i, cnt = 0; - unsigned int apbmst_base; - ambapp_ahbdev apbmst; - apbctrl_pp_dev *apb; - - if (max_cnt == 0) - return 0; - - /* Get AMBA APB Master */ - if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_APBMST, &apbmst) != 1) { - return 0; - } +struct ambapp_find_ahb_info { + /* Address of AHB device Plug&Play information */ + struct ambapp_pnp_ahb *pnp; + /* AHB Bus index of where the AHB device was found */ + int ahb_bus_index; + int dec_index; +}; - /* Get APB CTRL Plug&Play info area */ - apbmst_base = apbmst.address[0] & LEON3_IO_AREA; - apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA); +extern void ambapp_find_buses(unsigned int ioarea, struct ambapp_bus *abus); - for (i = 0; i < LEON3_APB_SLAVES; i++) { -#if defined(CONFIG_CMD_AMBAPP) - if (ambapp_apb_print && amba_vendor(apb->conf) - && amba_device(apb->conf)) { - ambapp_print_apb(apb, &apbmst, i); - } -#endif - if ((amba_vendor(apb->conf) == vendor) && - (amba_device(apb->conf) == driver) && ((index < 0) - || (index-- == 0))) { - /* Convert Plug&Play info into a more readable format */ - cnt++; - if (dev) { - dev->irq = amba_irq(apb->conf); - dev->ver = amba_ver(apb->conf); - dev->address = - (apbmst_base | - (((apb-> - bar & 0xfff00000) >> 12))) & (((apb-> - bar & - 0x0000fff0) - << 4) | - 0xfff00000); - dev++; - } - /* found max devices? */ - if (cnt >= max_cnt) - return cnt; - } - /* Get next Plug&Play entry */ - apb++; - } - return cnt; -} +extern int ambapp_find_apb(struct ambapp_bus *abus, unsigned int dev_vend, + int index, struct ambapp_find_apb_info *result); -unsigned int ambapp_apb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */ - register unsigned int driver, /* Plug&Play Device ID */ - register int index) -{ - register int i; - register ahbctrl_pp_dev *apbmst; - register apbctrl_pp_dev *apb; - register unsigned int apbmst_base; - - /* APBMST is a AHB Slave */ - apbmst = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0); - if (!apbmst) - return 0; - - apbmst_base = amba_membar_start(apbmst->bars[0]); - if (amba_membar_type(apbmst->bars[0]) == AMBA_TYPE_AHBIO) - apbmst_base = AMBA_TYPE_AHBIO_ADDR(apbmst_base); - apbmst_base &= LEON3_IO_AREA; - - /* Find the vendor/driver device on the first APB bus */ - apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA); - - for (i = 0; i < LEON3_APB_SLAVES; i++) { - if ((amba_vendor(apb->conf) == vendor) && - (amba_device(apb->conf) == driver) && ((index < 0) - || (index-- == 0))) { - /* Convert Plug&Play info info a more readable format */ - return (apbmst_base | (((apb->bar & 0xfff00000) >> 12))) - & (((apb->bar & 0x0000fff0) << 4) | 0xfff00000); - } - /* Get next Plug&Play entry */ - apb++; - } - return 0; -} +extern int ambapp_find_ahb(struct ambapp_bus *abus, unsigned int dev_vend, + int index, int type, struct ambapp_find_ahb_info *result); -/****************************** APB SLAVES ******************************/ +/************ C ROUTINES USED BY U-BOOT AMBA CORE DRIVERS ************/ +struct ambapp_bus ambapp_plb; -int ambapp_apb_count(unsigned int vendor, unsigned int driver) +void ambapp_bus_init( + unsigned int ioarea, + unsigned int freq, + struct ambapp_bus *abus) { - return ambapp_apb_scan(vendor, driver, NULL, 0, LEON3_APB_SLAVES); + int i; + + ambapp_find_buses(ioarea, abus); + for (i = 0; i < 6; i++) + if (abus->ioareas[i] == 0) + break; + abus->buses = i; + abus->freq = freq; } -int ambapp_apb_first(unsigned int vendor, - unsigned int driver, ambapp_apbdev * dev) +/* Parse APB PnP Information */ +void ambapp_apb_parse(struct ambapp_find_apb_info *info, ambapp_apbdev *dev) { - return ambapp_apb_scan(vendor, driver, dev, 0, 1); + struct ambapp_pnp_apb *apb = info->pnp; + unsigned int apbbase = (unsigned int)apb & 0xfff00000; + + dev->vendor = amba_vendor(apb->id); + dev->device = amba_device(apb->id); + dev->irq = amba_irq(apb->id); + dev->ver = amba_ver(apb->id); + dev->address = (apbbase | (((apb->iobar & 0xfff00000) >> 12))) & + (((apb->iobar & 0x0000fff0) << 4) | 0xfff00000); + dev->mask = amba_apb_mask(apb->iobar); + dev->ahb_bus_index = info->ahb_bus_index - 1; } -int ambapp_apb_next(unsigned int vendor, - unsigned int driver, ambapp_apbdev * dev, int index) +/* Parse AHB PnP information */ +void ambapp_ahb_parse(struct ambapp_find_ahb_info *info, ambapp_ahbdev *dev) { - return ambapp_apb_scan(vendor, driver, dev, index, 1); + struct ambapp_pnp_ahb *ahb = info->pnp; + unsigned int ahbbase = (unsigned int)ahb & 0xfff00000; + int i, type; + unsigned int addr, mask, mbar; + + dev->vendor = amba_vendor(ahb->id); + dev->device = amba_device(ahb->id); + dev->irq = amba_irq(ahb->id); + dev->ver = amba_ver(ahb->id); + dev->userdef[0] = ahb->custom[0]; + dev->userdef[1] = ahb->custom[1]; + dev->userdef[2] = ahb->custom[2]; + dev->ahb_bus_index = info->ahb_bus_index - 1; + for (i = 0; i < 4; i++) { + mbar = ahb->mbar[i]; + addr = amba_membar_start(mbar); + type = amba_membar_type(mbar); + if (type == AMBA_TYPE_AHBIO) { + addr = amba_ahbio_adr(addr, ahbbase); + mask = (((unsigned int) + (amba_membar_mask((~mbar))<<8)|0xff))+1; + } else { + /* AHB memory area, absolute address */ + mask = (~((unsigned int) + (amba_membar_mask(mbar)<<20)))+1; + } + dev->address[i] = addr; + dev->mask[i] = mask; + dev->type[i] = type; + } } -int ambapp_apbs_first(unsigned int vendor, - unsigned int driver, ambapp_apbdev * dev, int max_cnt) +int ambapp_apb_find(struct ambapp_bus *abus, int vendor, int device, + int index, ambapp_apbdev *dev) { - return ambapp_apb_scan(vendor, driver, dev, 0, max_cnt); -} + unsigned int devid = AMBA_PNP_ID(vendor, device); + int found; + struct ambapp_find_apb_info apbdev; -enum { - AHB_SCAN_MASTER = 0, - AHB_SCAN_SLAVE = 1 -}; - -/* Scan AMBA Plug&Play bus for AMBA AHB Masters or AHB Slaves - * for a certain matching Vendor and Device ID. - * - * Return number of devices found. - * - * Compact edition... - */ -static int ambapp_ahb_scan(unsigned int vendor, /* Plug&Play Vendor ID */ - unsigned int driver, /* Plug&Play Device ID */ - ambapp_ahbdev * dev, /* Result(s) is placed here */ - int index, /* Index of device to start copying Plug&Play - * info into dev - */ - int max_cnt, /* Maximal count that dev can hold, if dev - * is NULL function will stop scanning after - * max_cnt devices are found. - */ - int type /* Selectes what type of devices to scan. - * 0=AHB Masters - * 1=AHB Slaves - */ - ) -{ - int i, j, cnt = 0, max_pp_devs; - unsigned int addr; - ahbctrl_info *info = (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA); - ahbctrl_pp_dev *ahb; - - if (max_cnt == 0) - return 0; - - if (type == 0) { - max_pp_devs = LEON3_AHB_MASTERS; - ahb = info->masters; - } else { - max_pp_devs = LEON3_AHB_SLAVES; - ahb = info->slaves; - } + found = ambapp_find_apb(abus, devid, index, &apbdev); + if (found == 1) + ambapp_apb_parse(&apbdev, dev); - for (i = 0; i < max_pp_devs; i++) { -#if defined(CONFIG_CMD_AMBAPP) - if (ambapp_ahb_print && amba_vendor(ahb->conf) && - amba_device(ahb->conf)) { - ambapp_print_ahb(ahb, i); - } -#endif - if ((amba_vendor(ahb->conf) == vendor) && - (amba_device(ahb->conf) == driver) && - ((index < 0) || (index-- == 0))) { - /* Convert Plug&Play info info a more readable format */ - cnt++; - if (dev) { - dev->irq = amba_irq(ahb->conf); - dev->ver = amba_ver(ahb->conf); - dev->userdef[0] = ahb->userdef[0]; - dev->userdef[1] = ahb->userdef[1]; - dev->userdef[2] = ahb->userdef[2]; - for (j = 0; j < 4; j++) { - addr = amba_membar_start(ahb->bars[j]); - if (amba_membar_type(ahb->bars[j]) == - AMBA_TYPE_AHBIO) - addr = - AMBA_TYPE_AHBIO_ADDR(addr); - dev->address[j] = addr; - } - dev++; - } - /* found max devices? */ - if (cnt >= max_cnt) - return cnt; - } - /* Get next Plug&Play entry */ - ahb++; - } - return cnt; + return found; } -unsigned int ambapp_ahb_get_info(ahbctrl_pp_dev * ahb, int info) +int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device) { - register unsigned int ret; - - if (!ahb) - return 0; - - switch (info) { - default: - info = 0; - case 0: - case 1: - case 2: - case 3: - /* Get Address from PnP Info */ - ret = amba_membar_start(ahb->bars[info]); - if (amba_membar_type(ahb->bars[info]) == AMBA_TYPE_AHBIO) - ret = AMBA_TYPE_AHBIO_ADDR(ret); - return ret; - } - return 0; - + unsigned int devid = AMBA_PNP_ID(vendor, device); + int found; + struct ambapp_find_apb_info apbdev; + + found = ambapp_find_apb(abus, devid, 63, &apbdev); + if (found == 1) + return 64; + else + return 63 - apbdev.dec_index; } -ahbctrl_pp_dev *ambapp_ahb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */ - register unsigned int driver, /* Plug&Play Device ID */ - register unsigned int opts, /* 1=slave, 0=master */ - register int index) +int ambapp_ahb_find(struct ambapp_bus *abus, int vendor, int device, + int index, ambapp_ahbdev *dev, int type) { - register ahbctrl_pp_dev *ahb; - register ahbctrl_info *info = - (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA); - register int i; - register int max_pp_devs; - - if (opts == 0) { - max_pp_devs = LEON3_AHB_MASTERS; - ahb = info->masters; - } else { - max_pp_devs = LEON3_AHB_SLAVES; - ahb = info->slaves; - } + int found; + struct ambapp_find_ahb_info ahbdev; + unsigned int devid = AMBA_PNP_ID(vendor, device); - for (i = 0; i < max_pp_devs; i++) { - if ((amba_vendor(ahb->conf) == vendor) && - (amba_device(ahb->conf) == driver) && - ((index < 0) || (index-- == 0))) { - /* Convert Plug&Play info info a more readable format */ - return ahb; - } - /* Get next Plug&Play entry */ - ahb++; - } - return 0; + found = ambapp_find_ahb(abus, devid, index, type, &ahbdev); + if (found == 1) + ambapp_ahb_parse(&ahbdev, dev); + + return found; } -/****************************** AHB MASTERS ******************************/ -int ambapp_ahbmst_count(unsigned int vendor, unsigned int driver) +int ambapp_ahbmst_find(struct ambapp_bus *abus, int vendor, int device, + int index, ambapp_ahbdev *dev) { - /* Get number of devices of this vendor&device ID */ - return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_MASTERS, - AHB_SCAN_MASTER); + return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_MST); } -int ambapp_ahbmst_first(unsigned int vendor, unsigned int driver, - ambapp_ahbdev * dev) +int ambapp_ahbslv_find(struct ambapp_bus *abus, int vendor, int device, + int index, ambapp_ahbdev *dev) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_MASTER); + return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_SLV); } -int ambapp_ahbmst_next(unsigned int vendor, - unsigned int driver, ambapp_ahbdev * dev, int index) +int ambapp_ahb_count(struct ambapp_bus *abus, int vendor, int device, int type) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_MASTER); + int found; + struct ambapp_find_ahb_info ahbdev; + unsigned int devid = AMBA_PNP_ID(vendor, device); + + found = ambapp_find_ahb(abus, devid, 63, type, &ahbdev); + if (found == 1) + return 64; + else + return 63 - ahbdev.dec_index; } -int ambapp_ahbmsts_first(unsigned int vendor, - unsigned int driver, ambapp_ahbdev * dev, int max_cnt) +int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt, - AHB_SCAN_MASTER); + return ambapp_ahb_count(abus, vendor, device, DEV_AHB_MST); } -/****************************** AHB SLAVES ******************************/ -int ambapp_ahbslv_count(unsigned int vendor, unsigned int driver) +int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device) { - /* Get number of devices of this vendor&device ID */ - return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_SLAVES, - AHB_SCAN_SLAVE); + return ambapp_ahb_count(abus, vendor, device, DEV_AHB_SLV); } -int ambapp_ahbslv_first(unsigned int vendor, unsigned int driver, - ambapp_ahbdev * dev) +/* The define CONFIG_SYS_GRLIB_SINGLE_BUS may be defined on GRLIB systems + * where only one AHB Bus is available - no bridges are present. This option + * is available only to reduce the footprint. + * + * Defining this on a multi-bus GRLIB system may also work depending on the + * design. + */ + +#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS + +/* GAISLER AHB2AHB Version 1 Bridge Definitions */ +#define AHB2AHB_V1_FLAG_FFACT 0x0f0 /* Frequency factor against top bus */ +#define AHB2AHB_V1_FLAG_FFACT_DIR 0x100 /* Factor direction, 0=down, 1=up */ +#define AHB2AHB_V1_FLAG_MBUS 0x00c /* Master bus number mask */ +#define AHB2AHB_V1_FLAG_SBUS 0x003 /* Slave bus number mask */ + +/* Get Parent bus frequency. Note that since we go from a "child" bus + * to a parent bus, the frequency factor direction is inverted. + */ +unsigned int gaisler_ahb2ahb_v1_freq(ambapp_ahbdev *ahb, unsigned int freq) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_SLAVE); + int dir; + unsigned char ffact; + + /* Get division/multiple factor */ + ffact = (ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT) >> 4; + if (ffact != 0) { + dir = ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT_DIR; + + /* Calculate frequency by dividing or + * multiplying system frequency + */ + if (dir) + freq = freq * ffact; + else + freq = freq / ffact; + } + + return freq; } -int ambapp_ahbslv_next(unsigned int vendor, - unsigned int driver, ambapp_ahbdev * dev, int index) +/* AHB2AHB and L2CACHE ver 2 is not supported yet. */ +unsigned int gaisler_ahb2ahb_v2_freq(ambapp_ahbdev *ahb, unsigned int freq) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_SLAVE); + panic("gaisler_ahb2ahb_v2_freq: AHB2AHB ver 2 not supported\n"); + return -1; } +#endif -int ambapp_ahbslvs_first(unsigned int vendor, - unsigned int driver, ambapp_ahbdev * dev, int max_cnt) +/* Return the frequency of a AHB bus identified by index found + * note that this is not the AHB Bus number. + */ +unsigned int ambapp_bus_freq(struct ambapp_bus *abus, int ahb_bus_index) { - /* find first device of this */ - return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt, AHB_SCAN_SLAVE); + unsigned int freq = abus->freq; +#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS + unsigned int ioarea, ioarea_parent, bridge_pnp_ofs; + struct ambapp_find_ahb_info ahbinfo; + ambapp_ahbdev ahb; + int parent; + + debug("ambapp_bus_freq: get freq on bus %d\n", ahb_bus_index); + + while (ahb_bus_index != 0) { + debug(" BUS[0]: 0x%08x\n", abus->ioareas[0]); + debug(" BUS[1]: 0x%08x\n", abus->ioareas[1]); + debug(" BUS[2]: 0x%08x\n", abus->ioareas[2]); + debug(" BUS[3]: 0x%08x\n", abus->ioareas[3]); + debug(" BUS[4]: 0x%08x\n", abus->ioareas[4]); + debug(" BUS[5]: 0x%08x\n", abus->ioareas[5]); + + /* Get I/O area of AHB bus */ + ioarea = abus->ioareas[ahb_bus_index]; + + printf(" IOAREA: 0x%08x\n", ioarea); + + /* Get parent bus */ + parent = (ioarea & 0x7); + if (parent == 0) { + panic("%s: parent=0 indicates no parent! Stopping.\n", + __func__); + return -1; + } + parent = parent - 1; + bridge_pnp_ofs = ioarea & 0x7e0; + + debug(" PARENT: %d\n", parent); + debug(" BRIDGE_OFS: 0x%08x\n", bridge_pnp_ofs); + + /* Get AHB/AHB bridge PnP address */ + ioarea_parent = (abus->ioareas[parent] & 0xfff00000) | + AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA; + ahbinfo.pnp = (struct ambapp_pnp_ahb *) + (ioarea_parent | bridge_pnp_ofs); + + debug(" IOAREA PARENT: 0x%08x\n", ioarea_parent); + debug(" BRIDGE PNP: 0x%p\n", ahbinfo.pnp); + + /* Parse the AHB information */ + ahbinfo.ahb_bus_index = parent; + ambapp_ahb_parse(&ahbinfo, &ahb); + + debug(" BRIDGE ID: VENDOR=%d(0x%x), DEVICE=%d(0x%x)\n", + ahb.vendor, ahb.vendor, ahb.device, ahb.device); + + /* Different bridges may convert frequency differently */ + if ((ahb.vendor == VENDOR_GAISLER) && + ((ahb.device == GAISLER_AHB2AHB) || + (ahb.device == GAISLER_L2CACHE))) { + /* Get new frequency */ + if (ahb.ver > 1) + freq = gaisler_ahb2ahb_v2_freq(&ahb, freq); + else + freq = gaisler_ahb2ahb_v1_freq(&ahb, freq); + + debug(" NEW FREQ: %dHz\n", freq); + } else { + panic("%s: unsupported AMBA bridge\n", __func__); + return -1; + } + + /* Step upwards towards system top bus */ + ahb_bus_index = parent; + } +#endif + + debug("ambapp_bus_freq: %dHz\n", freq); + + return freq; } diff --git a/arch/sparc/cpu/leon3/ambapp_low.S b/arch/sparc/cpu/leon3/ambapp_low.S new file mode 100644 index 0000000000..2863586dc1 --- /dev/null +++ b/arch/sparc/cpu/leon3/ambapp_low.S @@ -0,0 +1,784 @@ +/* GRLIB AMBA Plug&Play information scanning implemented without + * using memory (stack) and one register window. The code scan + * the PnP info and inserts the AHB bridges/buses into register + * i0-i5. + * The code support + * - up to 6 AHB buses + * - multiple APB buses + * - support for AHB2AHB & L2CACHE bridges + * + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + + .seg "text" + .globl _nomem_amba_init + .globl _nomem_ambapp_find_buses + .globl _nomem_find_apb + .globl _nomem_find_ahb + +/* Overview + * ======== + * + * _nomem_amba_init - Init AMBA bus and calls _nomem_ambapp_find_buses + * _nomem_ambapp_find_buses - Scan AMBA PnP info for AHB buses/bridges and + * place them in i0-i5, see below + * _nomem_find_apb - Find one APB device identified by VENDOR:DEVICE + * ID and an index. + * _nomem_find_ahb - Find one AHB Master or Slave device identified + * by VENDOR:DEVICE ID and an index. + * init_ahb_bridges - Local function. Clears i0-i5 + * insert_ahb_bridge - Local function. Insert a new AHB bus into first + * free register in i0-i5. It also checks that the + * bus has not already been added. + * get_ahb_bridge - Local function. Get AHB bus from registers, + * return register iN, where N is defined by o0. + * + * The _nomem_find_apb and _nomem_find_ahb function requires that i0-i5 + * are populated with the AHB buses of the system. The registers are + * initialized by _nomem_ambapp_find_buses. + * + * AHB Bus result and requirements of i0-i5 + * ======================================== + * + * i0: AHB BUS0 IOAREA, no parent bus + * i1: AHB BUS1 IOAREA, parent bus is always i0 (AHB BUS0) and bridge address + * i2: AHB BUS2 IOAREA, 3-bit parent bus number and bridge address + * i3: AHB BUS3 IOAREA, 3-bit parent bus number and bridge address + * i4: AHB BUS4 IOAREA, 3-bit parent bus number and bridge address + * i5: AHB BUS5 IOAREA, 3-bit parent bus number and bridge address + * + * AHB BUS + * ------- + * Bits 31-20 (0xfff00000) contain the found bus I/O Area (AHB PnP area). + * + * 3-bit Parent bus + * ---------------- + * Bits 2-0 (0x00000007) contain parent bus number. Zero if no parent + * bus, 1 = parent is AHB BUS 0 (i0), 2 = parent is AHB BUS 1 (i1).. + * + * Bridge Address + * -------------- + * Bits 10-5 (0x000007e0) contain the index of the Bridge's PnP + * information on the parent. Since all bridges are found in the + * PnP information they all have a PnP entry. Together with the + * parent bus number the PnP entry can be found: + * PnPEntry = (BRIDGE_ADDRESS + (iN & 0xfff00000)) | 0x000ff800 + * where N is the parent bus minus one. + * + */ + +/* Function initializes the AHB Bridge I/O AREA storage. (Clears i0-i5) + * + * Arguments + * none + * + * Results + * none + * + * Clobbered + * none + */ + +init_ahb_bridges: + mov %g0, %i0 + mov %g0, %i1 + mov %g0, %i2 + mov %g0, %i3 + mov %g0, %i4 + retl + mov %g0, %i5 + +/* Function returns AHB Bridge I/O AREA for specified bus. + * + * Arguments + * - o0 = bus number + * + * Results + * - o0 = I/O AREA + * + * Clobbered + * none + */ +get_ahb_bridge: + cmp %o0, 1 + be,a L1 + mov %i0, %o0 + + cmp %o0, 2 + be,a L1 + mov %i1, %o0 + + cmp %o0, 3 + be,a L1 + mov %i2, %o0 + + cmp %o0, 4 + be,a L1 + mov %i3, %o0 + + cmp %o0, 5 + be,a L1 + mov %i4, %o0 + + cmp %o0, 6 + be,a L1 + mov %i5, %o0 + + /* o0 > 6: only 6 buses supported */ + mov %g0, %o0 +L1: + retl + nop + +/* Function adds a AHB Bridge I/O AREA to the i0-i5 registers if + * not already added. It stores the bus PnP start information. + * + * Arguments + * - o0 = AHB Bridge I/O area + * + * Results + * none + * + * Clobbered + * o2, o3 + */ +insert_ahb_bridge: + /* Check that bridge hasn't already been added */ + andn %o0, 0x7ff, %o2 + andn %i0, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + andn %i1, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + andn %i2, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + andn %i3, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + andn %i4, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + andn %i5, 0x7ff, %o3 + cmp %o3, %o2 + be L2 + + /* Insert into first free posistion */ + cmp %i0, %g0 + be,a L2 + mov %o0, %i0 + + cmp %i1, %g0 + be,a L2 + mov %o0, %i1 + + cmp %i2, %g0 + be,a L2 + mov %o0, %i2 + + cmp %i3, %g0 + be,a L2 + mov %o0, %i3 + + cmp %i4, %g0 + be,a L2 + mov %o0, %i4 + + cmp %i5, %g0 + be,a L2 + mov %o0, %i5 +L2: + retl + nop + +/* FUNCTION int _nomem_find_ahb_bus( + * unsigned int bridge, + * int vendor_device, + * int index, + * void **pconf, + * int not_used, + * int option + * ) + * + * Scans the AHB Master or Slave area for a matching VENDOR:DEVICE, the + * index is decremented when a matching device is found but index is + * greater than zero. When index is zero and a matching DEVICE:VENDOR + * is found the AHB configuration address and AHB I/O area is returned. + * + * i0-i7,l0,l1,l2,l3,l4,g2,o6 is not available for use. + * o1,o5 Must be left untouched + * + * Results + * - o0 Number of found devices (1 or 0) + * - o2 is decremented for each matching VENDOR:DEVICE found, zero if found + * - o3 Address of the AHB PnP configuration entry (Only valid if o0=1) + * + * Clobbered + * - o3 (Clobbered when no device was found) + * - o4 (Number of Devices left to search) + * - o0 (Bus ID, PnP ID, Device) + */ +_nomem_find_ahb_bus: + + /* Get the number of Slaves/Masters. + * Only AHB Bus 0 has 64 AHB Masters/Slaves the + * other AHB buses has 16 slaves and 16 masters. + */ + add %g0, 16, %o4 /* Defaulting to 16 */ + andcc %o0, 0x7, %g0 /* 3-bit bus id */ + be,a .L_maxloops_detected + add %g0, 64, %o4 /* AHB Bus 0 has 64 AHB Masters/Slaves */ +.L_maxloops_detected: + + /* Get start address of AHB Slave or AHB Master area depending on what + * we are searching for. + */ + andn %o0, 0x7ff, %o0 /* Remove Bus ID and 5-bit AHB/AHB + * Bridge PnP Address to get I/O Area */ + set AMBA_CONF_AREA, %o3 + or %o3, %o0, %o3 /* Master area address */ + + cmp %o5, DEV_AHB_SLV + be,a .L_conf_area_calculated + or %o3, AMBA_AHB_SLAVE_CONF_AREA, %o3 /* Add 0x800 to get to slave area */ +.L_conf_area_calculated: + + /* Iterate over all AHB device and try to find matching DEVICE:VENDOR + * o1 - VENDOR|DEVICE + * o2 - Index + * o3 - Current AHB Device Configuration address + * o5 - Type (leave untouched) + * + * o4 - Number of AHB device left to process + * o0 - tmp + */ +.L_process_one_conf: + ld [%o3], %o0 + andn %o0, 0xfff, %o0 + cmp %o0, 0 /* No device if zero */ + beq .L_next_conf + cmp %o1, 0 /* If VENDOR:DEVICE==0, consider all matching */ + beq .L_process_ahb_dev_found + cmp %o0, %o1 /* Does VENDOR and DEVICE Match? */ + bne .L_next_conf + nop +.L_process_ahb_dev_found: + /* Found a Matching VENDOR:DEVICE, index must also match */ + cmp %o2, %g0 + bne .L_next_conf + dec %o2 + /* Index matches also, return happy with o3 set to AHB Conf Address */ + mov %g0, %o2 + retl + add %g0, 1, %o0 + +.L_next_conf: + subcc %o4, 1, %o4 /* One device has been processed, + * Are there more devices to process? */ + bne .L_process_one_conf + add %o3, AMBA_AHB_CONF_LENGH, %o3 /* Next Configuration entry */ + /* No Matching device found */ + retl + mov %g0, %o0 + +/* FUNCTION int _nomem_find_ahb( + * int unused, + * int vendor_device, + * int index, + * void **pconf, + * int *ahb_bus_index, + * int option, + * ) + * + * Find a AHB Master or AHB Slave device, it puts the address of the AHB PnP + * configuration in o3 (pconf), the I/O Area base address in o4 (pioarea). + * + * Calls _nomem_find_ahb_bus for every AHB bus. + * + * i0-i7, l0, l1, o6, g1, g4-g7 is not available for use. + * + * Arguments + * - o0 Unused + * + * Results + * - o0 Number of found devices (1 or 0) + * - o2 Decremented Index (Zero if found) + * - o3 Address of the AHB PnP configuration entry + * - o4 AHB Bus index the device was found on (if o0=1) + * - o5 Left untouched + * + * Clobbered + * - o0 (AHB Bridge and used by _nomem_find_ahb_bus) + * - o2 (index is decremented) + * - l2 (Current AHB Bus index) + * - g2 (return address) + */ +_nomem_find_ahb: + mov %o7, %g2 /* Save return address */ + /* Scan all AHB Buses found for the AHB Master/Slave matching VENDOR:DEVICE */ + clr %l2 +.L_search_next_ahb_bus: + add %l2, 1, %l2 + call get_ahb_bridge /* Get bus %l0 I/O Area */ + mov %l2, %o0 + cmp %o0, %g0 + be .L_no_device_found /* If no more AHB bus is left to be scanned, proceed */ + nop + call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */ + nop + cmp %o0, %g0 /* If VENDOR:DEVICE was not found scan next AHB Bus */ + be .L_search_next_ahb_bus /* Do next bus is o0=0 (not found) */ + nop + /* The device was found, o0 is 1 */ + mov %g2, %o7 /* Restore return address */ + retl + mov %l2, %o4 /* The AHB bus index the device was found on */ + + /* No device found matching */ +.L_no_device_found: + mov %g2, %o7 /* Restore return address */ + retl + mov %g0, %o0 + + +/* FUNCTION int _nomem_find_apb_bus( + * int apbmst, + * int vendor_device, + * int index, + * void **pconf + * ) + * + * Find a APB Slave device, it puts the address of the APB PnP configuration + * in o3 (pconf). + * + * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges. + * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST. + * + * Results + * - o0 Number of found devices (1 or 0) + * - o2 Decremented Index + * - o3 Address of the found APB device PnP configuration entry + * + * Clobbered + * - o5 PnP VENDOR:DEVICE ID + */ + +_nomem_find_apb_bus: + set AMBA_CONF_AREA, %o3 + or %o0, %o3, %o3 /* Calc start of APB device PnP info */ + add %g0, 16, %o0 /* o0, number of APB Slaves left to scan */ +.L_process_one_apb_conf: + ld [%o3], %o5 + andn %o5, 0xfff, %o5 + cmp %o5, 0 /* No device if zero */ + beq .L_process_apb_dev_not_found + cmp %o1, 0 /* If VENDOR:DEVICE == -1, consider all matching */ + beq .L_process_apb_dev_found + cmp %o1, %o5 /* Found VENDOR:DEVICE */ + bne .L_process_apb_dev_not_found + nop + +.L_process_apb_dev_found: + /* Found matching device, compare index */ + cmp %o2, %g0 + bne .L_process_apb_dev_not_found + dec %o2 + /* Matching index and VENDOR:DEVICE */ + retl + add %g0, 1, %o0 + +.L_process_apb_dev_not_found: + subcc %o0, 1, %o0 + bne .L_process_one_apb_conf + add %o3, 8, %o3 + retl + mov %g0, %o0 + +/* FUNCTION int _nomem_find_apb( + * int unused, + * int vendor_device, + * int index, + * void **pconf, + * int *ahb_bus_index + * ) + * + * Find a APB Slave device, it puts the address of the APB PnP configuration + * in o3 (pconf), the APB Master I/O Area base address in o4 (papbarea). + * + * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges. + * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST. + * + * i0-i7, l0, l1, o6 is not available for use. + * + * Arguments + * - o0 Unused + * + * Results + * - o0 Number of found devices (1 or 0) + * - o2 Decremented Index if not found + * - o3 Address of the APB PnP configuration entry + * - o4 AHB Bus index of APB Bridge/APB Device + * + * Clobbered + * - o0 (AHB Bridge) + * - o2 (index is decremented) + * - l2 (APB DEV Index [7..4] : APBMST AHB Index [3..0]) + * - l3 (Current AHB Bus index) + * - l4 (temporary storage for APB VENDOR:DEVICE) + * - o5 (AHB Slave ID) + * - o0 (clobbered by _nomem_find_ahb_bus) + * - g2 (Return address) + */ +_nomem_find_apb: + /* Scan all AHB Buses found for AHB/APB Bridges */ + mov %o7, %g2 /* Save return address */ + mov %o1, %l4 /* Save APB VENDOR:DEVICE */ + sll %o2, 4, %l2 /* APB MST index = 0 */ + add %g0, 1, %l3 /* AHB Bus index = 0 */ +.L2_search_next_ahb_bus: + call get_ahb_bridge /* Get bus %l3 I/O Area */ + mov %l3, %o0 + cmp %o0, %g0 + be .L2_no_device_found /* If no more AHB bus is left to be scanned, proceed */ + add %g0, DEV_AHB_SLV, %o5 /* Search for AHB Slave */ + sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_APBMST)), %o1 + call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */ + and %l2, 0xf, %o2 /* Set APBMST index */ + cmp %o0, %g0 /* If no AHB/APB Bridge was not found, scan next AHB Bus */ + be .L_no_apb_bridge_found /* Do next bus */ + nop + + /* The AHB/APB Bridge was found. + * Search for the requested APB Device on the APB bus using + * find_apb_bus, it will decrement the index. + */ + ld [%o3 + AMBA_AHB_MBAR0_OFS], %o3 + sll %o3, 16, %o0 + and %o0, %o3, %o0 /* Address AND Address Mask */ + sethi %hi(0xfff00000), %o3 + and %o0, %o3, %o0 /* AHB/APB Bridge address */ + + srl %l2, 4, %o2 /* APB DEV Index */ + call _nomem_find_apb_bus + mov %l4, %o1 /* APB VENDOR:DEVICE */ + cmp %o0, %g0 + be .L_apb_dev_not_found + mov %g2, %o7 /* Restore return address */ + /* APB Device found + * o0 1 + * o2 Index is decremented to zero + * o3 APB configuration address, + * o4 APB Bridge Configuration address. + */ + mov %g0, %o2 + retl + mov %l3, %o4 + +.L_apb_dev_not_found: + /* Update APB DEV Index by saving output from find_apb_bus + * (index parameter) into bits [31..4] in L2. + */ + sll %o2, 4, %o2 + and %l2, 0xf, %l2 + or %o2, %l2, %l2 + /* Try finding the next AHB/APB Bridge on the same AHB bus + * to find more APB devices + */ + ba .L2_search_next_ahb_bus /* Find next AHB/APB bridge */ + inc %l2 + +.L_no_apb_bridge_found: + inc %l3 /* Next AHB Bus */ + ba .L2_search_next_ahb_bus /* Process next AHB bus */ + andn %l2, 0xf, %l2 /* Start at APB Bridge index 0 at every AHB Bus */ + /* No device found matching */ +.L2_no_device_found: + mov %g2, %o7 /* Restore return address */ + srl %l2, 4, %o2 /* APB DEV Index */ + retl + mov %g0, %o0 + + + +/* FUNCTION _nomem_amba_scan_gaisler_ahb2ahb_bridge(unsigned int bridge, int bus) + * + * Constraints: + * - o1 may not be used + * - o0, o2, o3 may be used. + * + * Arguments + * - o0 PnP Address of Bridge AHB device + * - o2 PnP ID of AHB device + * + * Results + * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge + * + * Clobbered + * - o0, o2 + * + */ +_nomem_amba_scan_gaisler_ahb2ahb_bridge: + andn %o2, 0xfff, %o2 + sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_AHB2AHB)), %o3 + cmp %o2, %o3 + beq .L_is_ahb2ahb_bridge + nop + + retl + add %g0, 1, %o0 + +.L_is_ahb2ahb_bridge: + /* Found a GAISLER AHB2AHB bridge */ + retl + ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */ + + +/* FUNCTION _nomem_amba_scan_gaisler_l2cache_bridge(unsigned int bridge, int bus) + * + * Constraints: + * - o1 may not be used + * - o0, o2, o3 may be used. + * + * Arguments + * - o0 PnP Address of Bridge AHB device + * - o2 PnP ID of AHB device + * + * Results + * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge + * + * Clobbered + * - o0, o2 + * + */ +_nomem_amba_scan_gaisler_l2cache_bridge: + andn %o2, 0xfff, %o2 + sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_L2CACHE)), %o3 + cmp %o2, %o3 + beq .L_is_l2cache_bridge + nop + + retl + add %g0, 1, %o0 + +.L_is_l2cache_bridge: + /* Found a GAISLER l2cache bridge */ + retl + ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */ + + +/* FUNCTION _nomem_amba_scan(unsigned int bridge, int bus) + * + * Constraints: + * i0-i7, l0 is used by caller + * o5-o7 may not be used. + * + * Arguments + * - o0 Bridge Information: I/O AREA and parent bus + * - o1 Bus + * + * Results + * - o0 Number of AHB bridges found + * + * Clobbered + * - o0 (Current AHB slave conf address) + * - o2 (Used by insert_bridge) + * - o3 (Used by insert_bridge) + * - l1 (Number of AHB Slaves left to process) + * - l2 (Current AHB slave conf address) + * - g2 (Return address) + */ +_nomem_amba_scan: + mov %o7, %g2 /* Save return address */ + set 16, %l1 + cmp %o1, 1 + be,a .L2_maxloops_detected + add %g0, 64, %l1 +.L2_maxloops_detected: + + /* Clear 3-bit parent bus from bridge to get I/O AREA, then or + * (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA) to get first AHB slave + * conf address. + */ + andn %o0, 0x7ff, %o0 + set (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA), %l2 + or %o0, %l2, %l2 + + /* Scan AHB Slave area for AHB<->AHB bridges. For each AHB device + * all "bridge drivers" are called, the driver function interface: + * + * Input: + * - o0 PnP Address of Bridge AHB device + * - o2 PnP ID of AHB device + * Return values: + * - o0 Address of new bus PnP area, returning a 1 in o2 means not found + * + * Constraints: + * - o1 may not be used + * - o0, o2, o3 may be used. + * + */ +.L_scan_one_ahb_slave: + ld [%l2], %o2 + + cmp %o2, %g0 + beq .L_scan_next_ahb_slave + nop + + /* Call the GAISLER AHB2AHB bridge driver */ + call _nomem_amba_scan_gaisler_ahb2ahb_bridge + mov %l2, %o0 + cmp %o0, 1 + bne .L_found_bridge + ld [%l2], %o2 + + /* Call the GAISLER L2CACHE bridge driver */ + call _nomem_amba_scan_gaisler_l2cache_bridge + mov %l2, %o0 + cmp %o0, 1 + bne .L_found_bridge + ld [%l2], %o2 + + /* Insert next bridge "driver" function here */ + + + /* The PnP ID did not match a bridge - a new bus was not found ==> + * step to next AHB device */ + ba .L_scan_next_ahb_slave + nop + + /* Add Found bus */ +.L_found_bridge: + and %l2, 0x7e0, %o2 + or %o2, %o0, %o0 /* Add AHB/AHB Bridge PnP address */ + call insert_ahb_bridge /* Insert Bridge into found buses storage */ + or %o1, %o0, %o0 /* Add parent bus LSB 3-bits */ + +.L_scan_next_ahb_slave: + /* More Slaves to process? */ + subcc %l1, 1, %l1 + bne .L_scan_one_ahb_slave + add %l2, AMBA_AHB_CONF_LENGH, %l2 + + /* No more AHB devices to process */ + mov %g2, %o7 /* Restore return address */ + retl + nop + +/* FUNCTION _nomem_ambapp_find_buses(unsigned int ioarea) + * + * Find AMBA AHB buses. + * + * Constraints: + * i6-i7, l7 is used by caller + * + * Arguments + * - o0 Bridge Information: I/O AREA and parent bus + * + * Results + * - o0 Number of AHB bridges found + * - i0-i5 initialized + * + * Clobbered + * - o0 (Current AHB slave conf address) + * - o2 (Used by insert_bridge) + * - o3 (Used by insert_bridge) + * - l0 (Current AHB Bus) + * - l1 (Used by nomem_amba_scan) + * - l2 (Used by nomem_amba_scan) + * - l3 (Used by nomem_amba_scan) + * - l4 (Used by nomem_amba_scan) + * + * - g1 (level 1 return address) + * - g2 (Used by nomem_amba_scan) + */ +_nomem_ambapp_find_buses: + mov %o7, %g1 /* Save return address */ + + /* Initialize AHB Bus storage */ + call init_ahb_bridges + nop + + /* Insert AHB Bus 0 */ + call insert_ahb_bridge + nop /* Argument already prepared by caller */ + + /* Scan AHB Bus 0 for AHB Bridges */ + call _nomem_amba_scan + add %g0, 1, %o1 + + /* Scan all AHB Buses found for more AHB Bridges */ + add %g0, 2, %l0 +.L100_search_next_ahb_bus: + call get_ahb_bridge /* Get bus %l0 I/O Area */ + mov %l0, %o0 + cmp %o0, %g0 + be .L100_return /* If no more AHB bus is left to be scanned, proceed */ + nop + call _nomem_amba_scan /* Scan bus %l0 for AHB Bridges. i0-i7,l0 is used */ + mov %l0, %o1 /* I/O AREA untouched in o0 */ + ba .L100_search_next_ahb_bus /* Do next bus */ + add %l0, 1, %l0 + +.L100_return: + mov %g1, %o7 + retl + nop + + +/* FUNCTION _nomem_amba_init(unsigned int ioarea) + * + * Find all AHB buses + * + * Constraints: + * i6, i7, o6, o7, l7, l6, g3, g4, g5, g6, g7 is used by caller + * + * Arguments + * - o0 Bridge Information: I/O AREA and parent bus + * + * Results + * - o0 Number of AHB bridges found + * + * Clobbered + * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses) + * - o0, o1, o2, o3 (Used as arguments) + * - o5 (return address) + * - g1 (level 1 return address) + * - g2 (level 2 return address) + */ +_nomem_amba_init: + mov %o7, %o5 /* Save return address, o5 not used */ + + /* Scan for buses, it will init i0-i5 */ + call _nomem_ambapp_find_buses + nop + + mov %o5, %o7 + retl + nop + +/* Call tree and their return address register + * + *_nomem_amba_scan (g1) + * -> init_ahb_bridges (o7) + * -> insert_ahb_bridge (o7) + * -> _nomem_amba_scan (g2) + * -> insert_ahb_bridge (o7) + * -> get_ahb_bridge (o7) + * + * + * -> _nomem_find_apb (g2) + * -> get_ahb_bridge (o7) + * -> _nomem_find_ahb_bus (o7) + * -> _nomem_find_apb_bus (o7) + * -> _nomem_find_ahb (g2) + * -> get_ahb_bridge (o7) + * -> _nomem_find_ahb_bus (o7) + * -> mem_handler.func() (o7) + * + */ diff --git a/arch/sparc/cpu/leon3/ambapp_low_c.S b/arch/sparc/cpu/leon3/ambapp_low_c.S new file mode 100644 index 0000000000..42288fac59 --- /dev/null +++ b/arch/sparc/cpu/leon3/ambapp_low_c.S @@ -0,0 +1,113 @@ +/* C-interface for AMBA PnP scanning functions implemented in + * ambapp_low.S. At the point the memory and stack can be + * used. + * + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + + .seg "text" + .extern _nomem_ambapp_find_buses + .extern _nomem_find_apb + .extern _nomem_find_ahb + + .globl ambapp_find_buses + .globl ambapp_find_apb + .globl ambapp_find_ahb + + +/* C-interface for _nomem_ambapp_find_buses used when memory is available. + */ +ambapp_find_buses: + save %sp, -104, %sp + mov %i1, %l7 /* Save second argument */ + call _nomem_ambapp_find_buses + mov %i0, %o0 + + /* Store result */ + st %g0, [%l7+0x00] + st %i0, [%l7+0x04] + st %i1, [%l7+0x08] + st %i2, [%l7+0x0c] + st %i3, [%l7+0x10] + st %i4, [%l7+0x14] + st %i5, [%l7+0x18] + + ret + restore + +/* C-interface for _nomem_find_apb used when memory is available. + * + * void ambapp_find_apb( + * struct ambapp_bus *abus, + * unsigned int dev_vend, + * int index, + * struct ambapp_find_apb_info *result + * ); + * + */ +ambapp_find_apb: + save %sp, -104, %sp + + mov %i3, %l7 /* Save second argument */ + mov %i1, %o1 + mov %i2, %o2 + + /* Initialize buses available in system */ + ld [%i0+0x08], %i1 + ld [%i0+0x0c], %i2 + ld [%i0+0x10], %i3 + ld [%i0+0x14], %i4 + ld [%i0+0x18], %i5 + + call _nomem_find_apb + ld [%i0+0x04], %i0 + + st %o2, [%l7+0x08] /* Decremented Index */ + st %o3, [%l7] /* PnP configuration address of APB Device */ + st %o4, [%l7+0x04] /* AHB Bus Index of AHB/APB bridge and APB Device */ + mov %o0, %i0 + ret + restore + +/* C-interface for _nomem_find_ahb used when memory is available. + * + * void ambapp_find_ahb( + * struct ambapp_bus *abus, + * unsigned int dev_vend, + * int index, + * int type, + * struct ambapp_find_ahb_info *result + * ); + * + */ +ambapp_find_ahb: + save %sp, -104, %sp + + mov %i4, %l7 /* Save second argument */ + clr %o0 + mov %i1, %o1 + mov %i2, %o2 + clr %o3 + clr %o4 + mov %i3, %o5 + + /* Initialize buses available in system */ + ld [%i0+0x08], %i1 + ld [%i0+0x0c], %i2 + ld [%i0+0x10], %i3 + ld [%i0+0x14], %i4 + ld [%i0+0x18], %i5 + + call _nomem_find_ahb + ld [%i0+0x04], %i0 + + st %o2, [%l7+0x08] /* Decremented Index */ + st %o3, [%l7] /* PnP configuration address of AHB Device */ + st %o4, [%l7+0x04] /* AHB Bus Index of AHB Device */ + mov %o0, %i0 + ret + restore diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c index 2f41d8847b..f23ecb89be 100644 --- a/arch/sparc/cpu/leon3/cpu_init.c +++ b/arch/sparc/cpu/leon3/cpu_init.c @@ -1,8 +1,8 @@ /* Initializes CPU and basic hardware such as memory * controllers, IRQ controller and system timer 0. * - * (C) Copyright 2007 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * (C) Copyright 2007, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com * * SPDX-License-Identifier: GPL-2.0+ */ @@ -14,6 +14,11 @@ #include +/* Default Plug&Play I/O area */ +#ifndef CONFIG_AMBAPP_IOAREA +#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA +#endif + #define TIMER_BASE_CLK 1000000 #define US_PER_TICK (1000000 / CONFIG_SYS_HZ) @@ -39,64 +44,30 @@ struct { /* * Breath some life into the CPU... * - * Set up the memory map, - * initialize a bunch of registers. - * * Run from FLASH/PROM: * - until memory controller is set up, only registers available + * - memory controller has already been setup up, stack can be used * - no global variables available for writing * - constants available */ - void cpu_init_f(void) { - /* these varaiable must not be initialized */ - ambapp_dev_irqmp *irqmp; - ambapp_apbdev apbdev; - register unsigned int apbmst; - - /* find AMBA APB Master */ - apbmst = (unsigned int) - ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0); - if (!apbmst) { - /* - * no AHB/APB bridge, something is wrong - * ==> jump to start (or hang) - */ - while (1) ; - } - /* Init memory controller */ - if (init_memory_ctrl()) { - while (1) ; - } - - /**************************************************** - * From here we can use the main memory and the stack. - */ - - /* Find AMBA APB IRQMP Controller */ - if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev) != 1) { - /* no IRQ controller, something is wrong - * ==> jump to start (or hang) - */ - while (1) ; - } - irqmp = (ambapp_dev_irqmp *) apbdev.address; - /* initialize the IRQMP */ - irqmp->ilevel = 0xf; /* all IRQ off */ - irqmp->iforce = 0; - irqmp->ipend = 0; - irqmp->iclear = 0xfffe; /* clear all old pending interrupts */ - irqmp->cpu_mask[0] = 0; /* mask all IRQs on CPU 0 */ - irqmp->cpu_force[0] = 0; /* no force IRQ on CPU 0 */ - - /* cache */ } +/* Routine called from start.S, + * + * Run from FLASH/PROM: + * - memory controller has already been setup up, stack can be used + * - global variables available for read/writing + * - constants avaiable + */ void cpu_init_f2(void) { - + /* Initialize the AMBA Plug & Play bus structure, the bus + * structure represents the AMBA bus that the CPU is located at. + */ + ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb); } /* @@ -105,95 +76,58 @@ void cpu_init_f2(void) int cpu_init_r(void) { ambapp_apbdev apbdev; + int index, cpu; + ambapp_dev_gptimer *timer = NULL; + unsigned int bus_freq; /* * Find AMBA APB IRQMP Controller, - * When we come so far we know there is a IRQMP available */ - ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev); - irqmp = (ambapp_dev_irqmp *) apbdev.address; - - /* timer */ - if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_GPTIMER, &apbdev) != 1) { - printf("cpu_init_r: gptimer not found!\n"); - return 1; - } - gptimer = (ambapp_dev_gptimer *) apbdev.address; - gptimer_irq = apbdev.irq; - - /* initialize prescaler common to all timers to 1MHz */ - gptimer->scalar = gptimer->scalar_reload = - (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1; - - return (0); -} - -/* find & setup memory controller */ -int init_memory_ctrl() -{ - register ambapp_dev_mctrl *mctrl; - register ambapp_dev_sdctrl *sdctrl; - register ambapp_dev_ddrspa *ddrspa; - register ambapp_dev_ddr2spa *ddr2spa; - register ahbctrl_pp_dev *ahb; - register unsigned int base; - register int not_found_mctrl = -1; - - /* find ESA Memory controller */ - base = ambapp_apb_next_nomem(VENDOR_ESA, ESA_MCTRL, 0); - if (base) { - mctrl = (ambapp_dev_mctrl *) base; - - /* config MCTRL memory controller */ - mctrl->mcfg1 = CONFIG_SYS_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300); - mctrl->mcfg2 = CONFIG_SYS_GRLIB_MEMCFG2; - mctrl->mcfg3 = CONFIG_SYS_GRLIB_MEMCFG3; - not_found_mctrl = 0; + if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, + GAISLER_IRQMP, 0, &apbdev) != 1) { + panic("%s: IRQ controller not found\n", __func__); + return -1; } + irqmp = (ambapp_dev_irqmp *)apbdev.address; - /* find Gaisler Fault Tolerant Memory controller */ - base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_FTMCTRL, 0); - if (base) { - mctrl = (ambapp_dev_mctrl *) base; - - /* config MCTRL memory controller */ - mctrl->mcfg1 = CONFIG_SYS_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300); - mctrl->mcfg2 = CONFIG_SYS_GRLIB_FT_MEMCFG2; - mctrl->mcfg3 = CONFIG_SYS_GRLIB_FT_MEMCFG3; - not_found_mctrl = 0; + /* initialize the IRQMP */ + irqmp->ilevel = 0xf; /* all IRQ off */ + irqmp->iforce = 0; + irqmp->ipend = 0; + irqmp->iclear = 0xfffe; /* clear all old pending interrupts */ + for (cpu = 0; cpu < 16; cpu++) { + /* mask and clear force for all IRQs on CPU[N] */ + irqmp->cpu_mask[cpu] = 0; + irqmp->cpu_force[cpu] = 0; } - /* find SDRAM controller */ - base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_SDCTRL, 0); - if (base) { - sdctrl = (ambapp_dev_sdctrl *) base; - - /* config memory controller */ - sdctrl->sdcfg = CONFIG_SYS_GRLIB_SDRAM; - not_found_mctrl = 0; - } + /* timer */ + index = 0; + while (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_GPTIMER, + index, &apbdev) == 1) { + timer = (ambapp_dev_gptimer *)apbdev.address; + if (gptimer == NULL) { + gptimer = timer; + gptimer_irq = apbdev.irq; + } + + /* Different buses may have different frequency, the + * frequency of the bus tell in which frequency the timer + * prescaler operates. + */ + bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index); - ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDR2SPA, 1, 0); - if (ahb) { - ddr2spa = (ambapp_dev_ddr2spa *) ambapp_ahb_get_info(ahb, 1); + /* initialize prescaler common to all timers to 1MHz */ + timer->scalar = timer->scalar_reload = + (((bus_freq / 1000) + 500) / 1000) - 1; - /* Config DDR2 memory controller */ - ddr2spa->cfg1 = CONFIG_SYS_GRLIB_DDR2_CFG1; - ddr2spa->cfg3 = CONFIG_SYS_GRLIB_DDR2_CFG3; - not_found_mctrl = 0; + index++; } - - ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDRSPA, 1, 0); - if (ahb) { - ddrspa = (ambapp_dev_ddrspa *) ambapp_ahb_get_info(ahb, 1); - - /* Config DDR memory controller */ - ddrspa->ctrl = CONFIG_SYS_GRLIB_DDR_CFG; - not_found_mctrl = 0; + if (!gptimer) { + printf("%s: gptimer not found!\n", __func__); + return 1; } - - /* failed to find any memory controller */ - return not_found_mctrl; + return 0; } /* Uses Timer 0 to get accurate diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index f1dcab3377..c4a49ed369 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -14,6 +14,11 @@ DECLARE_GLOBAL_DATA_PTR; +/* Select which UART that will become u-boot console */ +#ifndef CONFIG_SYS_GRLIB_APBUART_INDEX +#define CONFIG_SYS_GRLIB_APBUART_INDEX 0 +#endif + static int leon3_serial_init(void) { ambapp_dev_apbuart *uart; @@ -21,7 +26,8 @@ static int leon3_serial_init(void) unsigned int tmp; /* find UART */ - if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) != 1) + if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_APBUART, + CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) return -1; /* didn't find hardware */ /* found apbuart, let's init .. */ diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c index ca7d6e86f0..1be84c646b 100644 --- a/arch/sparc/cpu/leon3/usb_uhci.c +++ b/arch/sparc/cpu/leon3/usb_uhci.c @@ -690,11 +690,11 @@ void handle_usb_interrupt(void) */ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) { - unsigned char temp; ambapp_ahbdev ahbdev; /* Find GRUSB core using AMBA Plug&Play information */ - if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_UHCI, &ahbdev) != 1) { + if (ambapp_ahbslv_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_UHCI, + CONFIG_SYS_GRLIB_GRUSB_INDEX, &ahbdev) != 1) { printf("USB UHCI: Failed to find GRUSB controller\n"); return -1; } -- cgit From cff009ed6ff7da2e87f8213d34ed869be4373604 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Mon, 25 Jan 2010 09:56:08 +0100 Subject: sparc: leon3: Added memory controller initialization using new AMBA PnP routines. Signed-off-by: Daniel Hellstrom --- arch/sparc/cpu/leon3/Makefile | 2 +- arch/sparc/cpu/leon3/memcfg.c | 237 +++++++++++++++++++++++++++++++++++ arch/sparc/cpu/leon3/memcfg.h | 90 ++++++++++++++ arch/sparc/cpu/leon3/memcfg_low.S | 253 ++++++++++++++++++++++++++++++++++++++ arch/sparc/cpu/leon3/start.S | 41 +++++- 5 files changed, 621 insertions(+), 2 deletions(-) create mode 100644 arch/sparc/cpu/leon3/memcfg.c create mode 100644 arch/sparc/cpu/leon3/memcfg.h create mode 100644 arch/sparc/cpu/leon3/memcfg_low.S (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/Makefile b/arch/sparc/cpu/leon3/Makefile index c5068a8ecf..f4cf43cfec 100644 --- a/arch/sparc/cpu/leon3/Makefile +++ b/arch/sparc/cpu/leon3/Makefile @@ -7,4 +7,4 @@ extra-y = start.o obj-y = cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \ - interrupts.o prom.o usb_uhci.o + interrupts.o prom.o usb_uhci.o memcfg.o memcfg_low.o diff --git a/arch/sparc/cpu/leon3/memcfg.c b/arch/sparc/cpu/leon3/memcfg.c new file mode 100644 index 0000000000..b9eda440e2 --- /dev/null +++ b/arch/sparc/cpu/leon3/memcfg.c @@ -0,0 +1,237 @@ +/* GRLIB Memory controller setup. The register values are used + * from the associated low level assembler routine implemented + * in memcfg_low.S. + * + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include "memcfg.h" +#include + +#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1 +struct mctrl_setup esa_mctrl1_cfg = { + .reg_mask = 0x7, + .regs = { + { + .mask = 0x00000300, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3, + }, + } +}; +#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2 +struct mctrl_setup esa_mctrl2_cfg = { + .reg_mask = 0x7, + .regs = { + { + .mask = 0x00000300, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG1, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG2, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG3, + }, + } +}; +#endif +#endif + +#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1 +struct mctrl_setup gaisler_ftmctrl1_cfg = { + .reg_mask = 0x7, + .regs = { + { + .mask = 0x00000300, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3, + }, + } +}; +#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2 +struct mctrl_setup gaisler_ftmctrl2_cfg = { + .reg_mask = 0x7, + .regs = { + { + .mask = 0x00000300, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG1, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG2, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG3, + }, + } +}; +#endif +#endif + +#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1 +struct mctrl_setup gaisler_sdctrl1_cfg = { + .reg_mask = 0x1, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL1_CTRL, + }, + } +}; +#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2 +struct mctrl_setup gaisler_sdctrl2_cfg = { + .reg_mask = 0x1, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL2_CTRL, + }, + } +}; +#endif +#endif + +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 +struct ahbmctrl_setup gaisler_ddr2spa1_cfg = { + .ahb_mbar_no = 1, + .reg_mask = 0xd, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG1, + }, + { 0x00000000, 0}, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG3, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG4, + }, + } +}; +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2 +struct ahbmctrl_setup gaisler_ddr2spa2_cfg = { + .ahb_mbar_no = 1, + .reg_mask = 0xd, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG1, + }, + { 0x00000000, 0}, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG3, + }, + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG4, + }, + } +}; +#endif +#endif + +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1 +struct ahbmctrl_setup gaisler_ddrspa1_cfg = { + .ahb_mbar_no = 1, + .reg_mask = 0x1, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL, + }, + } +}; +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2 +struct ahbmctrl_setup gaisler_ddrspa2_cfg = { + .ahb_mbar_no = 1, + .reg_mask = 0x1, + .regs = { + { + .mask = 0x00000000, + .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA2_CTRL, + }, + } +}; +#endif +#endif + +struct grlib_mctrl_handler grlib_mctrl_handlers[] = { +/* ESA MCTRL (PROM/FLASH/IO/SRAM/SDRAM) */ +#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1 + {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL), + _nomem_mctrl_init, (void *)&esa_mctrl1_cfg}, +#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2 + {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL), + _nomem_mctrl_init, (void *)&esa_mctrl2_cfg}, +#endif +#endif + +/* GAISLER Fault Tolerant Memory controller (PROM/FLASH/IO/SRAM/SDRAM) */ +#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1 + {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL), + _nomem_mctrl_init, (void *)&gaisler_ftmctrl1_cfg}, +#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2 + {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL), + _nomem_mctrl_init, (void *)&gaisler_ftmctrl2_cfg}, +#endif +#endif + +/* GAISLER SDRAM-only Memory controller (SDRAM) */ +#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1 + {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL), + _nomem_mctrl_init, (void *)&gaisler_sdctrl1_cfg}, +#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2 + {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL), + _nomem_mctrl_init, (void *)&gaisler_sdctrl2_cfg}, +#endif +#endif + +/* GAISLER DDR Memory controller (DDR) */ +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1 + {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP), + _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa1_cfg}, +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2 + {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP), + _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa2_cfg}, +#endif +#endif + +/* GAISLER DDR2 Memory controller (DDR2) */ +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 + {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP), + _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa1_cfg}, +#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2 + {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP), + _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa2_cfg}, +#endif +#endif + + /* Mark end */ + MH_END +}; diff --git a/arch/sparc/cpu/leon3/memcfg.h b/arch/sparc/cpu/leon3/memcfg.h new file mode 100644 index 0000000000..a524896e5a --- /dev/null +++ b/arch/sparc/cpu/leon3/memcfg.h @@ -0,0 +1,90 @@ +/* GRLIB Memory controller setup structures + * + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MEMCFG_H__ +#define __MEMCFG_H__ + +/*********** Low Level Memory Controller Initalization ***********/ + +#ifndef __ASSEMBLER__ + +struct grlib_mctrl_handler; + +typedef void (*mctrl_handler_t)( + struct grlib_mctrl_handler *dev, + void *conf, + unsigned int ioarea + ); + +/* Memory Controller Handler Structure */ +struct grlib_mctrl_handler { + unsigned char type; /* 0x00. MASK: AHB MST&SLV, APB SLV */ + char index; /* 0x01. Unit number, 0, 1, 2... */ + char unused[2]; /* 0x02 */ + unsigned int ven_dev; /* 0x04. Device and Vendor */ + mctrl_handler_t func; /* 0x08. Memory Controller Handler */ + void *priv; /* 0x0c. Optional private data, ptr to + * info how to set up controller */ +}; + +extern struct grlib_mctrl_handler grlib_mctrl_handlers[]; + +#endif + +#define MH_STRUCT_SIZE (4*4) +#define MH_TYPE 0x00 +#define MH_INDEX 0x01 +#define MH_VENDOR_DEVICE 0x04 +#define MH_FUNC 0x08 +#define MH_PRIV 0x0c + +#define MH_TYPE_NONE DEV_NONE +#define MH_TYPE_AHB_MST DEV_AHB_MST +#define MH_TYPE_AHB_SLV DEV_AHB_SLV +#define MH_TYPE_APB_SLV DEV_APB_SLV + +#define MH_UNUSED {0, 0} +#define MH_END {DEV_NONE, 0, MH_UNUSED, AMBA_PNP_ID(0, 0), 0, 0} + +/*********** Low Level Memory Controller Initalization Handlers ***********/ + +#ifndef __ASSEMBLER__ +extern void _nomem_mctrl_init( + struct grlib_mctrl_handler *dev, + void *conf, + unsigned int ioarea_apbmst); + +struct mctrl_setup { + unsigned int reg_mask; /* Which registers to write */ + struct { + unsigned int mask; /* Mask used keep reg bits unchanged */ + unsigned int value; /* Value written to register */ + } regs[8]; +}; + +extern void _nomem_ahbmctrl_init( + struct grlib_mctrl_handler *dev, + void *conf, + unsigned int ioarea_apbmst); + +struct ahbmctrl_setup { + int ahb_mbar_no; /* MBAR to get register address from */ + unsigned int reg_mask; /* Which registers to write */ + struct { + unsigned int mask; /* Mask used keep reg bits unchanged */ + unsigned int value; /* Value written to register */ + } regs[8]; +}; +#endif + +/* mctrl_setup data structure defines */ +#define NREGS_OFS 0 +#define REGS_OFS 0x4 +#define REGS_SIZE 8 + +#endif diff --git a/arch/sparc/cpu/leon3/memcfg_low.S b/arch/sparc/cpu/leon3/memcfg_low.S new file mode 100644 index 0000000000..84a81a90a9 --- /dev/null +++ b/arch/sparc/cpu/leon3/memcfg_low.S @@ -0,0 +1,253 @@ +/* This is the memory initialization functions, the function + * implemented below initializes each memory controller + * found and specified by the input grlib_mctrl_handler structure. + * + * After the memory controllers have been initialized the stack + * can be used. + * + * (C) Copyright 2010, 2015 + * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include "memcfg.h" +#include + + .seg "text" + .globl _nomem_memory_ctrl_init + .globl _nomem_mctrl_init, _nomem_ahbmctrl_init + .extern _nomem_find_apb + .extern _nomem_find_ahb + + +/* FUNCTION + * _nomem_memory_controller_init(struct grlib_mctrl_handler *mem_handlers) + * + * Initialize AMBA devices, _nomem_amba_init() has prepared i0-i5 + * with the AHB buses on the system. + * + * For each entry in mem_handlers find the VENDOR:DEVICE and handle it + * by calling the handler function pointer. + * + * Constraints: + * i6, i7, o6, l7, l6, g3, g4, g5, g6, g7 is used by caller + * o7 is return address + * l5 reserved for this function for future use. + * + * Arguments + * - o0 Pointer to memory handler array + * + * Results + * - o0 Number of memory controllers found + * + * Clobbered + * - o0 (Current AHB slave conf address) + * - l0 (mem handler entry address) + * - l1 (Return value, number of memory controllers found) + * - o7 (function pointer) + * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses) + * - o0, o1, o2, o3, o4, o5 (Used as arguments) + * + * - g1 ( level 1 return address) + * - g2 ( level 2 return address) + */ + +_nomem_memory_ctrl_init: + /* At this point all AHB buses has been found and the I/O Areas of + * all AHB buses is stored in the i0-i5 registers. Max 6 buses. Next, + * memory controllers are found by searching all buses for matching + * VENDOR:DEVICE. The VENDOR:DEVICE to search for are taken from the + * mem_handlers array. For each match the function pointer stored in + * the mem_handler entry is called to handle the hardware setup. + */ + mov %o7, %g1 /* Save return address */ + mov %o0, %l0 + mov %g0, %l1 /* The return value */ + +.L_do_one_mem_handler: + ld [%l0 + MH_FUNC], %o7 + cmp %o7, %g0 + be .L_all_mctrl_handled + nop + + /*** Scan for memory controller ***/ + + /* Set up argments, o5 not used by _nomem_find_apb */ + ldub [%l0 + MH_TYPE], %o5 + clr %o4 + clr %o3 + ldub [%l0 + MH_INDEX], %o2 + ld [%l0 + MH_VENDOR_DEVICE], %o1 + + /* An empty config? */ + cmp %o5, DEV_NONE + beq .L_all_mctrl_next + + /* Select function (APB or AHB) */ + cmp %o5, DEV_APB_SLV + bne .L_find_ahb_memctrl + clr %o0 +.L_find_apb_memctrl: + call _nomem_find_apb /* Scan for APB slave device */ + nop + + /* o3 = iobar address + * o4 = AHB Bus index + * + * REG ADR = ((iobar >> 12) & (iobar << 4) & 0xfff00) | "APB Base" + */ + ld [%o3 + AMBA_APB_IOBAR_OFS], %o5 + srl %o5, 12, %o2 + sll %o5, 4, %o5 + and %o2, %o5, %o5 + set 0xfff00, %o2 + and %o2, %o5, %o5 + sethi %hi(0xfff00000), %o2 + and %o3, %o2, %o2 + or %o5, %o2, %o5 /* Register base address */ + + ba .L_call_one_mem_handler + nop + +.L_find_ahb_memctrl: + call _nomem_find_ahb /* Scan for AHB Slave or Master. + * o5 determine type. */ + nop + clr %o5 + + /* Call the handler function if the hardware was found + * + * o0 = mem_handler + * o1 = Configuration address + * o2 = AHB Bus index + * o3 = APB Base register (if APB Slave) + * + * Constraints: + * i0-i7, l0, l1, l5, g1, g3-g7 may no be used. + */ +.L_call_one_mem_handler: + cmp %o0, %g0 + be .L_all_mctrl_next + mov %l0, %o0 /* Mem handler pointer */ + mov %o3, %o1 /* AMBA PnP Configuration address */ + mov %o4, %o2 /* AHB Bus index */ + ld [%l0 + MH_FUNC], %o7 /* Get Function pointer */ + call %o7 + mov %o5, %o3 /* APB Register Base Address */ + + inc %l1 /* Number of Memory controllers + * handled. */ + + /* Do next entry in mem_handlers */ +.L_all_mctrl_next: + ba .L_do_one_mem_handler + add %l0, MH_STRUCT_SIZE, %l0 + +.L_all_mctrl_handled: + mov %g1, %o7 /* Restore return address */ + retl + mov %l1, %o0 + + + +/* Generic Memory controller initialization routine (APB Registers) + * + * o0 = mem_handler structure pointer + * o1 = Configuration address + * o2 = AHB Bus index + * o3 = APB Base register + * + * Clobbered + * o0-o4 + */ +_nomem_mctrl_init: + ld [%o0 + MH_PRIV], %o0 /* Get Private structure */ + ld [%o0], %o1 /* Get Reg Mask */ + and %o1, 0xff, %o1 + add %o0, REGS_OFS, %o0 /* Point to first reg */ +.L_do_one_reg: + andcc %o1, 0x1, %g0 + beq .L_do_next_reg + ld [%o0], %o2 + ld [%o3], %o4 + and %o4, %o2, %o4 + ld [%o0 + 4], %o2 + or %o4, %o2, %o4 + st %o4, [%o3] + +.L_do_next_reg: + add %o0, REGS_SIZE, %o0 + add %o3, 4, %o3 + srl %o1, 1, %o1 + cmp %o1, 0 + bne .L_do_one_reg + nop + + /* No more registers to write */ + retl + nop + + + +/* Generic Memory controller initialization routine (AHB Registers) + * + * o0 = mem_handler structure pointer + * o1 = Configuration address of memory controller + * o2 = AHB Bus index + * + * Clobbered + * o0-o5 + */ +_nomem_ahbmctrl_init: + ld [%o0 + MH_PRIV], %o0 /* Get Private structure */ + + /* Get index of AHB MBAR to get registers from */ + ld [%o0], %o5 + add %o0, 4, %o0 + + /* Get Address of MBAR in PnP info */ + add %o5, 4, %o5 + sll %o5, 2, %o5 + add %o5, %o1, %o5 /* Address of MBAR */ + + /* Get Address of registers from PnP information + * Address is in AHB I/O format, i.e. relative to bus + * + * ADR = (iobar & (iobar << 16) & 0xfff00000) + * IOADR = (ADR >> 12) | "APB Base" + */ + ld [%o5], %o5 + sll %o5, 16, %o4 + and %o5, %o4, %o5 + sethi %hi(0xfff00000), %o4 + and %o5, %o4, %o5 /* ADR */ + and %o4, %o1, %o4 + srl %o5, 12, %o5 + or %o5, %o4, %o3 /* IOADR in o3 */ + + ld [%o0], %o1 /* Get Reg Mask */ + and %o1, 0xff, %o1 + add %o0, REGS_OFS, %o0 /* Point to first reg */ +.L_do_one_ahbreg: + andcc %o1, 0x1, %g0 + beq .L_do_next_reg + ld [%o0], %o2 + ld [%o3], %o4 + and %o4, %o2, %o4 + ld [%o0 + 4], %o2 + or %o4, %o2, %o4 + st %o4, [%o3] + +.L_do_next_ahbreg: + add %o0, REGS_SIZE, %o0 + add %o3, 4, %o3 + srl %o1, 1, %o1 + cmp %o1, 0 + bne .L_do_one_reg + nop + + /* No more registers to write */ + retl + nop diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index be9b3fb20b..203114970b 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -13,6 +13,12 @@ #include #include #include +#include + +/* Default Plug&Play I/O area */ +#ifndef CONFIG_AMBAPP_IOAREA +#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA +#endif /* Entry for traps which jump to a programmer-specified trap handler. */ #define TRAPR(H) \ @@ -208,6 +214,7 @@ version_string: .ascii U_BOOT_VERSION_STRING, "\0" .section ".text" + .extern _nomem_amba_init, _nomem_memory_ctrl_init .align 4 _hardreset: @@ -259,6 +266,38 @@ stackp: andn %fp, 0x0f, %fp sub %fp, 64, %sp +/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */ + SPARC_PIC_THUNK_CALL(l7) + +/* Scan AMBA Bus for AMBA buses using PnP information. All found + * AMBA buses I/O area will be located in i0-i5 upon return. + * The i0-i5 registers are later used by _nomem_amba_init2 + */ +ambainit: + call _nomem_amba_init + sethi %hi(CONFIG_AMBAPP_IOAREA), %o0 + +/* Scan AMBA Buses for memory controllers, then initialize the + * memory controllers. Note that before setting up the memory controller + * the stack can not be used. + */ +memory_ctrl_init: + SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0) + + call _nomem_memory_ctrl_init + nop + +/* The return valu indicate how many memory controllers where found and + * initialized, if no memory controller was initialized, we can not continue + * because from here on we expect memory to be working. + */ + cmp %o0, 0 +memory_ctrl_init_failed: + beq memory_ctrl_init_failed + nop + +/*** From now on the stack can be used. ***/ + cpu_init_unreloc: call cpu_init_f nop @@ -269,7 +308,6 @@ cpu_init_unreloc: /* un relocated end address of monitor */ #define DATA_END __init_end - SPARC_PIC_THUNK_CALL(l7) reloc: SPARC_LOAD_ADDRESS(TEXT_START, l7, g2) SPARC_LOAD_ADDRESS(DATA_END, l7, g3) @@ -389,6 +427,7 @@ jump: SPARC_LOAD_ADDRESS(board_init_f, l7, o1) set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 + SPARC_LOAD_ADDRESS(TEXT_START, l7, g1) add %o1,%o2,%o1 sub %o1,%g1,%o1 call %o1 -- cgit From f2879f5952b35009c76de92ca57d67ab628bac0c Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Thu, 21 Jan 2010 16:09:37 +0100 Subject: sparc: leon3: Moved GRLIB core header files to common include/grlib directory Signed-off-by: Daniel Hellstrom --- arch/sparc/cpu/leon3/cpu_init.c | 10 ++++------ arch/sparc/cpu/leon3/interrupts.c | 7 ++++--- arch/sparc/cpu/leon3/prom.c | 7 +++++-- arch/sparc/cpu/leon3/serial.c | 13 +++++++------ 4 files changed, 20 insertions(+), 17 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c index f23ecb89be..40d1751fcb 100644 --- a/arch/sparc/cpu/leon3/cpu_init.c +++ b/arch/sparc/cpu/leon3/cpu_init.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include @@ -27,11 +29,7 @@ DECLARE_GLOBAL_DATA_PTR; /* reset CPU (jump to 0, without reset) */ void start(void); -/* find & initialize the memory controller */ -int init_memory_ctrl(void); - ambapp_dev_irqmp *irqmp = NULL; -ambapp_dev_mctrl memctrl; ambapp_dev_gptimer *gptimer = NULL; unsigned int gptimer_irq = 0; int leon3_snooping_avail = 0; @@ -150,8 +148,8 @@ int timer_interrupt_init_cpu(void) gptimer->e[0].val = 0; gptimer->e[0].rld = (TIMER_BASE_CLK / CONFIG_SYS_HZ) - 1; gptimer->e[0].ctrl = - (LEON3_GPTIMER_EN | - LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN); + (GPTIMER_CTRL_EN | GPTIMER_CTRL_RS | + GPTIMER_CTRL_LD | GPTIMER_CTRL_IE); return gptimer_irq; } diff --git a/arch/sparc/cpu/leon3/interrupts.c b/arch/sparc/cpu/leon3/interrupts.c index a834aa024b..2312b58d29 100644 --- a/arch/sparc/cpu/leon3/interrupts.c +++ b/arch/sparc/cpu/leon3/interrupts.c @@ -23,6 +23,8 @@ #include #include +#include +#include /* 15 normal irqs and a non maskable interrupt */ #define NR_IRQS 15 @@ -125,9 +127,8 @@ int interrupt_init_cpu(void) /* Handle Timer 0 IRQ */ void timer_interrupt_cpu(void *arg) { - gptimer->e[0].ctrl = (LEON3_GPTIMER_EN | - LEON3_GPTIMER_RL | - LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN); + gptimer->e[0].ctrl = (GPTIMER_CTRL_EN | GPTIMER_CTRL_RS | + GPTIMER_CTRL_LD | GPTIMER_CTRL_IE); /* nothing to do here */ return; } diff --git a/arch/sparc/cpu/leon3/prom.c b/arch/sparc/cpu/leon3/prom.c index d0f18603a1..c391be7420 100644 --- a/arch/sparc/cpu/leon3/prom.c +++ b/arch/sparc/cpu/leon3/prom.c @@ -15,6 +15,9 @@ #include #include #include +#include +#include +#include #include /* @@ -741,14 +744,14 @@ static int PROM_TEXT leon_nbputchar(int c) /* Wait for last character to go. */ while (!(SPARC_BYPASS_READ(&uart->status) - & LEON_REG_UART_STATUS_THE)) ; + & APBUART_STATUS_THE)); /* Send data */ SPARC_BYPASS_WRITE(&uart->data, c); /* Wait for data to be sent */ while (!(SPARC_BYPASS_READ(&uart->status) - & LEON_REG_UART_STATUS_TSE)) ; + & APBUART_STATUS_TSE)); return 0; } diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index c4a49ed369..cefb9d2c36 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -38,9 +39,9 @@ static int leon3_serial_init(void) writel(tmp, &uart->scaler); /* Let bit 11 be unchanged (debug bit for GRMON) */ - tmp = readl(&uart->ctrl) & LEON_REG_UART_CTRL_DBG; + tmp = readl(&uart->ctrl) & APBUART_CTRL_DBG; /* Receiver & transmitter enable */ - tmp |= LEON_REG_UART_CTRL_RE | LEON_REG_UART_CTRL_TE; + tmp |= APBUART_CTRL_RE | APBUART_CTRL_TE; writel(tmp, &uart->ctrl); gd->arch.uart = uart; @@ -61,7 +62,7 @@ static void leon3_serial_putc_raw(const char c) return; /* Wait for last character to go. */ - while (!(readl(&uart->status) & LEON_REG_UART_STATUS_THE)) + while (!(readl(&uart->status) & APBUART_STATUS_THE)) WATCHDOG_RESET(); /* Send data */ @@ -69,7 +70,7 @@ static void leon3_serial_putc_raw(const char c) #ifdef LEON_DEBUG /* Wait for data to be sent */ - while (!(readl(&uart->status) & LEON_REG_UART_STATUS_TSE)) + while (!(readl(&uart->status) & APBUART_STATUS_TSE)) WATCHDOG_RESET(); #endif } @@ -90,7 +91,7 @@ static int leon3_serial_getc(void) return 0; /* Wait for a character to arrive. */ - while (!(readl(&uart->status) & LEON_REG_UART_STATUS_DR)) + while (!(readl(&uart->status) & APBUART_STATUS_DR)) WATCHDOG_RESET(); /* Read character data */ @@ -104,7 +105,7 @@ static int leon3_serial_tstc(void) if (!uart) return 0; - return readl(&uart->status) & LEON_REG_UART_STATUS_DR; + return readl(&uart->status) & APBUART_STATUS_DR; } /* set baud rate for uart */ -- cgit From 5786071e4a3b9091940580c208e27d21fdc269cf Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Mon, 20 Sep 2010 10:00:49 +0200 Subject: sparc: ambapp: Removed warning and unnecessary printout. Signed-off-by: Daniel Hellstrom --- arch/sparc/cpu/leon3/ambapp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/ambapp.c b/arch/sparc/cpu/leon3/ambapp.c index bb81338dac..b8ac05faf1 100644 --- a/arch/sparc/cpu/leon3/ambapp.c +++ b/arch/sparc/cpu/leon3/ambapp.c @@ -10,6 +10,7 @@ /* #define DEBUG */ #include +#include #include #include @@ -257,7 +258,7 @@ unsigned int ambapp_bus_freq(struct ambapp_bus *abus, int ahb_bus_index) /* Get I/O area of AHB bus */ ioarea = abus->ioareas[ahb_bus_index]; - printf(" IOAREA: 0x%08x\n", ioarea); + debug(" IOAREA: 0x%08x\n", ioarea); /* Get parent bus */ parent = (ioarea & 0x7); -- cgit From e43ce3fca755d79635899b658a97f3c4a7dbf220 Mon Sep 17 00:00:00 2001 From: Francois Retief Date: Thu, 29 Oct 2015 12:55:34 +0200 Subject: sparc: leon3: Add debug_uart support to LEON3 serial driver. Signed-off-by: Francois Retief --- arch/sparc/cpu/leon3/cpu_init.c | 5 ++++- arch/sparc/cpu/leon3/serial.c | 27 ++++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 2 deletions(-) (limited to 'arch/sparc') diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c index 40d1751fcb..b140da31b1 100644 --- a/arch/sparc/cpu/leon3/cpu_init.c +++ b/arch/sparc/cpu/leon3/cpu_init.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -50,7 +51,9 @@ struct { */ void cpu_init_f(void) { - +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif } /* Routine called from start.S, diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index cefb9d2c36..66b3773027 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -28,8 +28,10 @@ static int leon3_serial_init(void) /* find UART */ if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_APBUART, - CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) + CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) { + panic("%s: apbuart not found!\n", __func__); return -1; /* didn't find hardware */ + } /* found apbuart, let's init .. */ uart = (ambapp_dev_apbuart *) apbdev.address; @@ -145,3 +147,26 @@ __weak struct serial_device *default_serial_console(void) { return &leon3_serial_drv; } + +#ifdef CONFIG_DEBUG_UART_APBUART + +#include + +static inline void _debug_uart_init(void) +{ + ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE; + uart->scaler = (((CONFIG_DEBUG_UART_CLOCK*10) / (CONFIG_BAUDRATE*8)) - 5)/10; + uart->ctrl = APBUART_CTRL_RE | APBUART_CTRL_TE; +} + +static inline void _debug_uart_putc(int ch) +{ + ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE; + while (!(readl(&uart->status) & APBUART_STATUS_THE)) + WATCHDOG_RESET(); + writel(ch, &uart->data); +} + +DEBUG_UART_FUNCS + +#endif -- cgit